Instruction Manual for LIQUID EARS models including: HPK13164, HPW13165, HPX13216, HPK13164 Earphones Plus Active Noise Cancelling, HPK13164, Earphones Plus Active Noise Cancelling, Plus Active Noise Cancelling, Active Noise Cancelling, Noise Cancelling
ANC TRUE WIRELESS Bud Earphones
TRUE WIRELESS EARPHONES + ACTIVE NOISE CANCELLING HPK13164/ HPW13165/ HPX13216 Product Overview & Functions: Earphone Power Button LED Indicator Contact with Charging Prongs Specifications: Bluetooth® Version Driver Size Charge Case Charging Time Earphone Battery Type Charge Case Battery Type Active Noise Cancelling Sensitivity Frequency Response Impedance Bluetooth Range Standby Time Play Time Operation Temperature : 5.4 : 13mm : 1.5hr : Li-polymer 3.7V/40mAh : 3.7V/300mAh : -25dB : 112dB ± 1.5dB : 20Hz 20KHz : 32 Ohm : 10m : 60 Hours : 20 Hours : 0° - 45°C How to use these Earphones: Automatic Synchronizing · When the earphones are removed from the case they will automatically turn ON and sync to each other, You are now ready to pair to your device. If they have previously been paired to a device, they will automatically re-connect. Pairing with Your Devices · Look for "LE TWS" on your device in the Bluetooth menu and select it to connect. You will hear a voice prompt "Connected", and the second earphone LED indicator will stop flashing. You are now connected. Pairing Just One Earphone with Your Devices · Take either one of the earphones out from the charging case, it will automatically turn on. The LED indicator on the earphone stem will flash. Look for "LE TWS" on your device in your Bluetooth menu and select it to connect. You will hear a voice prompt "Connected", and the earphone LED indicator will stop flashing. You are now connected. Note: Earphones will automatically turn OFF if there is no operation for 3 minutes after switching on. Battery Charging (Charging Case) · Connect the USB-C charging cable into the socket on the charging case. · Plug the cable into a standard USB 5V power output. · The red LED indicator will flash while the case is · Charging and will then stay on when fully charged. (Note: Before using the charging case for the first time, we recommend you fully charge the battery. A full charge takes around 1.5 hours). · When fully charged, unplug the charging cable from the power socket. Note: The charging case will stop working when the battery is low. Earphone Charging · When the earphones battery power is low, the LED indicator will flash red slowly and you will hear a voice prompt reminding you to recharge the device. · Put the earphones into the charging case, ensuring that the earphones are pushed down all the way. · If the earphones are on, they will automatically turn OFF when inserted into the case for charging. (Note: The earphones come with a built-in rechargeable battery. Before using them for the first time, we recommend you fully charge the battery. A full charge takes around 1.5 hour). · The white LED indicator on the charging case will be on when charging the earphones and the charging case LED indicator will turn off when charging is complete. · When the earphones are removed from the case they will automatically turn ON and sync to each other. If they have previously been paired to your device, they will also automatically re-connect. Warning: The earphones can only be used with the provided charge case. Operation: Note: Some features may differ pending paired device software versions and platforms. Before using the earphones for the first time, place both earphones into the supplied charging case once and then remove them. This will activate the multifunction button option. Play / Pause Answer/ End Calls Reject Incoming Calls Previous Track Next Track Volume Volume + Voice Assistant Transparency Mode/ ANC Mode ON Transparency Mode/ ANC Mode Off Left Earphone (L) Single Click Single Click Press and Hold Double Click Triple Click Press and Hold for 3 Seconds Right Earphone (R) Single Click Single Click Press and Hold Double Click Triple Click Press and Hold for 2 Seconds Press and Hold for 2 Seconds Auto Power Off: Earphones will automatically turn off if there is no operation for 3 minutes after removing from the charging case. Read this user manual before using the product. Keep the user manual for future reference and include it when passing product to third parties Liquid Ears will not in any way be held responsible for injury or damage caused to persons or property arising from misuse of the product. WARNING The USB power cable has been meticulously designed and optimized for use exclusively with the product it accompanies. Using the USB power cable with devices other than the one intended could cause electrical hazards such as overheating, short-circuiting, or even damage to your device. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by The Crest Company is under licence. Other trademarks and trade names are those of their respective owners. v3Adobe PDF library 17.00