Sena SRL2 for Shoei Helmets

Ride Connected

Blast your favorite tunes, talk over the intercom with your buddies, hear directions from your GPS and more, all through your headset. With built-in Bluetooth® capabilities, Audio Multitasking™, HD speakers and a microphone using Advanced Noise Control™, technology has never felt so minimal or freeing.

• Bluetooth 4.1
• Intercom 1.6 KM
• Eight-Way Intercom
• Custom Helmet Fit
• Audio Multitasking
• Advanced Noise Control
• Voice Command
• Music Sharing

Getting Started

This product comes with a Quick Start Guide, which is a basic version of the User's Guide. A FULL VERSION OF THE USER'S GUIDE CAN BE DOWNLOADED AT SENA.COM.

Update this product for free with the latest firmware to fully enjoy the new advanced features built into this product. Visit sena.com to see how to update your product.

Users can follow Sena on Facebook, YouTube, Twitter and Instagram to receive the most up to date information on products, helpful tips and all other announcements regarding Sena products.

Installation

Flip Up Helmet Installation

Full Face Helmet Installation

Sena Motorcycles App

• Download
• Android: Google Play Store > Sena Motorcycles
• iOS: App Store > Sena Motorcycles

Sena Device Manager

The Sena Device Manager allows you to upgrade the firmware and configure its settings directly from your PC or Apple computer. Download the Sena Device Manager from sena.com.

Button Operation

Power On/Off

• Powering On: Press the (+) Button and the Center Button for 1 second.
• Powering Off: Tap the (+) Button and the Center Button.

Volume Adjustment

• Volume Up: Tap the (+) Button.
• Volume Down: Tap the (-) Button.

Bluetooth Pairing Phone, MP3 and GPS

• Press the Center Button for 12 seconds.
• Tap the (+) Button.
• Select Sena SRL2 in your mobile phone.

Mobile Phone Answer

• Answer: Tap the Center Button.
• End / Reject: Press the Center Button for 2 seconds.
• Voice Dial: Press the Center Button for 3 seconds.
• Speed Dial: Press the (+) Button for 3 seconds.

Music

• Play/Pause music: Press the Center Button for 1 second.
• Track forward: Press the (+) Button for 1 second.
• Track backward: Press the (-) Button for 1 second.

Battery Check

• Tap the (-) Button.

Status LED Indicators:

• 70~100%: Solid Blue
• 30~70%: Solid Red
• 0~30%: Solid Red (Flashing)

Configuration Menu

• Press the Center Button for 12 seconds.

Intercom Pairing

• Pairing: Press the Center Button for 8 seconds.
• Start/End Intercom: Tap the Center Button.
• 1st Friend: Tap the Center Button.
• 2nd Friend: Tap the Center Button.
• 3rd Friend and above: Tap the (+) Button.
• Cancel: Tap the (-) Button.
• Confirm: Tap the Center Button.

Start/End Group Intercom

• Press the (+) Button and the (-) Button.

Note: You can use Group Intercom after saving your own group in the Sena Motorcycles App. Please refer to the SRL2 User's Guide for more details.

Radio

• Radio On/Off: Press the (-) Button for 1 second.
• Seek Up: Tap the (+) Button.
• Seek Station: Tap the (-) Button.
• Scan Up FM Band: Press the (+) Button for 1 second.
• Start or Stop: Press the (+) Button.
• Save to preset while scanning: Tap the Center Button.
• Save and Delete Preset: Press the Center Button for 3 seconds.
• Move to Preset Station: Press the Center Button for 1 second.

Voice Command

• Voice Command: Tap the Center Button.
• Function: Say "Hello Sena"
• Play/Pause music: Say "Music"
• FM Radio on/off: Say "FM radio"
• Start/End each intercom: Say "Intercom [one, two,..., nine]"
• Speed dialing: Say "Speed dial [one, two, three]"

Troubleshooting

Factory Reset

If you want to restore the SRL2 to factory default settings, use the Factory Reset in the configuration menu. The headset automatically restores the default settings and turns off.

Fault Reset

If the SRL2 is not working properly for any reason, reset by gently pushing the pin-hole reset button located next to the DC Power Charging & Firmware Upgrade Port. Note: The charging LED is not a pin-hole reset button. Do not press it.

Quick Reference