ZapperBox A1 Indoor/Outdoor Antenna

Quick Start Guide

This guide provides essential information for setting up your ZapperBox A1 Indoor/Outdoor Antenna. The A1 antenna is designed for optimal reception of digital television signals, featuring a built-in amplifier and an integrated LTE filter for enhanced performance.

Key Features:

• Built-in amplifier
• Integrated LTE filter
• Removable reflector
• Integrated 5G antenna

Installation Overview

The ZapperBox A1 antenna can be mounted in multiple ways to suit your needs:

• Table Mount: Ideal for indoor placement, this method utilizes the included reflector for enhanced signal gain.
• Wall Mount: Securely attach the antenna to a wall using appropriate screws (not included).
• Pole Mount: Mount the antenna to an outdoor pole using the provided clamp and wing nuts.

For detailed connection instructions, please refer to the Antenna Connections section.

Technical Specifications

The ZapperBox A1 antenna offers robust performance with the following specifications:

• Frequency: 630 - 960 MHz (5G), UHF (1.7 - 2.7 GHz), VHF/UHF (174-608 MHz)
• Gain: 0 dBi (5G), 32 dBi* (Vertical), 23 dBi*/32 dBi* (Horizontal)
• IP Rating: IP53
• Dimensions: 14" x 14" x 4" (without pole mount)
• Temperature Range: -5°C to 45°C

*Self-regulating gain.

Safety Instructions

Lightning Protection: For outdoor installations, ensure the antenna system is properly grounded to protect against voltage surges. Consult the National Electrical Code (ANSI/NFPA70) or Canadian Electrical Code (CSA C22.1) for detailed grounding requirements.

Warnings: To prevent fire or shock hazards, keep the power supply away from moisture. Avoid installing antennas near power lines. Modifications not in accordance with product instructions will void the warranty.