TEKLEAD T3030 Wireless Barcode Scanner Quick Start Guide

This guide provides essential information for setting up and operating your TEKLEAD T3030 Wireless Barcode Scanner.

Pairing Modes

Wireless 2.4G Pairing

This mode is compatible with Windows, Mac OS, Linux, Unix, Android, and other operating systems.

Scan the setting code for "Wireless 2.4G Mode".
Scan the setting code for "One-click Pairing". The scanner's blue indicator light will flash rapidly, indicating it has entered the 2.4G pairing state.
Connect the 2.4G receiver to your host device within one minute. A "Di" sound confirms successful pairing, and the blue LED2 will remain illuminated.

Note: The scanner prioritizes the last paired receiver by default.

Bluetooth HID Pairing

This mode supports Windows, Mac OS, iOS, Android, and other operating systems.

Scan the setting code for "Bluetooth HID Mode".
Scan the setting code for "One-click pairing". The scanner's blue LED1 and LED2 will flash alternately and rapidly, indicating it has entered the Bluetooth HID pairing state.
On your host device, enable Bluetooth, search for the device named "BarCode Scanner HID", and connect. A "Di" sound confirms successful pairing, and the blue LED2 will remain illuminated.

Note: Pressing and holding the button for 8 seconds allows quick entry into Bluetooth HID pairing status.

Bluetooth SPP/BLE Pairing

This mode enables connection via Bluetooth serial port to Windows, Mac OS, iOS, Android, and other operating systems.

Scan the setting code for "Bluetooth SPP Mode" (the blue LED2 will flash quickly) or "Bluetooth BLE Mode" (the blue LED1 and LED2 will flash quickly and synchronously).
Press and hold the button for 8 seconds to enter the Bluetooth pairing status setting.
Using a serial port transparent transmission tool on your host device, search for either "BarCode Scanner SPP" or "BarCode Scanner BLE" and connect. A "Di" sound confirms successful pairing, and the blue LED2 will remain illuminated.

System Settings

Data Transfer Mode

Select from: Storage Mode, Synchronous Mode*, Upload All Data, Total Data Uploaded, Clear All Data.

Data Format

The product supports wireless 2.4G receivers and wired USB interfaces to directly output data in GB2312 or Unicode(UTF-8) encoding.

Data Control

Configure data transmission control characters: Add CR, Add LF, Add CR+LF, Add Tab(HT), NONE.

Sleep Time Settings

Configure the scanner's sleep timer: 1 Minute, 5 Minutes*, 30 Minutes, Never Sleep, Sleep Now.

Sound Settings

Adjust audible feedback: High*, Low, Disable.

Vibration Setting (Optional)

Enable or Disable vibration feedback: Enable*, Disable.

Keyboard Language Settings

Select your preferred keyboard language: Japanese, American English*, Portuguese, German, British English, French, Brazilian Portuguese, Spanish, Russian, Italian, International Keyboard.

Bluetooth HID Transfer Rate

Adjust the Bluetooth HID data transfer speed: Fast, Medium*, Low, Ultra Low.

iOS HID Virtual Keyboard

When connected via Bluetooth HID to an iOS device, you can configure a double-click action to show or hide the virtual keyboard: Enable*, Disable.

LED Indicator Description

Blue LED1 flashes once: Indicates successful barcode decoding.
Blue LED2 is on: Indicates a successful connection.
Red LED3 is on: Indicates the battery is charging; turns off when fully charged.
Blue LED1 flashes quickly: The scanner is in the 2.4G pairing state.
Blue LED2 flashes quickly: The scanner is in Bluetooth SPP mode pairing state.
Blue LED1 and blue LED2 blink rapidly alternately: The scanner is in Bluetooth HID mode pairing state.
Blue LED1 and blue LED2 flash quickly and synchronously: The scanner is in Bluetooth BLE mode pairing state.
Blue LED1 and blue LED2 flash slowly at the same time: The scanner is in an upgrade state.

Warranty & Certification

Warranty Card

Please fill in the following details: User Name, Telephone Number, Address, Product Name, Model NO., Product Serial Number, Purchase Date, Problem Description.

Certificate of Conformity

Product Name: [Product Name]
Model NO.: [Model NO.]
Product Serial Number: [Product Serial Number]
Date of Production: [Date of Production]
Inspector: [Inspector Name]
QC: PASS

This product meets the company's quality standards and relevant industry standards, confirming its qualification.

FCC Compliance Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.