Navitas TAC 2 Controllers

About This Manual

This manual provides essential information for the installation and servicing of the Navitas TAC 2 440A and 600A Controllers for AC Induction Motors. It is crucial for owners and operators to read and understand all warnings and instructions to ensure safe and proper operation.

Key Features & Applications

The Navitas TAC 2 controllers are designed to enhance the performance of AC induction motors in various golf and low-speed vehicles. Compatible models include:

• E-Z-GO® RXV® (CURTIS® and DANAHER®)
• E-Z-GO® TXT® Conversions
• CLUB CAR® Precedent® Conversions
• YAMAHA® YDRE2® TOYOTA® (NEOS®)
• YAMAHA® G29® Conversions (MORIC®)

For the most up-to-date installation information and videos, please visit NavitasVS.com/manuals.

Important Safety Information

DANGER: Failure to follow safety warnings can result in serious injury or death. Always disconnect power before installation or servicing. Ensure the vehicle is properly supported and all safety precautions are taken. Refer to the manual for detailed safety instructions and required personal protective equipment, including safety glasses.

Best Practices: Maximize driving range by using only necessary speed, minimizing acceleration, and utilizing regenerative braking for hill descents. Monitor component temperatures, especially after programming changes.

Installation Overview

Before beginning installation, verify that all vehicle electrical components are in good working order. Disconnect the battery, ensure the Run/Tow switch is in the TOW position, and use insulated tools. The manual details the process for removing the OEM controller and installing the Navitas TAC 2 controller, including specific torque specifications for mounting bolts and wire connections.

Product Identification

Please record the controller's serial number, located on the front of the unit, before installation. This information is vital for service and warranty purposes.