User Guide for ASUS models including: FX506H Laptops For Gaming, FX506H, Laptops For Gaming, For Gaming
Asus FX506LH TUF Gaming F15 Spare Parts Online Shop | Accessoires Asus
File Info : application/pdf, 29 Pages, 5.21MB
DocumentDocumentASUS TUF Gaming F15 (FX506H) series Service Guide
COPYRIGHT INFORMATION
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. ("ASUS").
ASUS PROVIDES THIS MANUAL "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners' benefit, without intent to infringe.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Copyright © 2024 ASUSTeK COMPUTER INC. All Rights Reserved.
LIMITATION OF LIABILITY
Circumstances may arise where because of a default on ASUS' part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS' suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
Disclaimer ASUS is not responsible for direct, indirect, intentional or unintentional damages resulting from improper installation and operation.
Safety precautions · Keep liquids or moisture away from your Notebook PC before installing or removing any components. · Ensure to place your Notebook PC on a stable surface before installing or removing any components. · Detach the clip or flap before removing the signal cables to prevent damage. · Disconnect the power plug by pulling the plug evenly to avoid damage. Ensure to connect the signal cables in the correct orientation. · Disconnect all power cables and remove the battery pack (if applicable) before cleaning your Notebook PC with liquid detergent to avoid risk of electric shock. · Disconnect all power cables and remove the battery pack (if applicable) before installing or removing any components. Ensure to read and follow the instructions in the manual. · Before handling components, use a grounded wrist strap or touch a safely grounded object to avoid damaging them due to static electricity. · Keep liquids or moisture away from your Notebook PC to avoid short circuits. · Hold components by the edges to avoid touching the ICs. · Ensure to properly install all the components before connecting the AC power. · Do not use power adapters or batteries from other devices to reduce the risk of injury to persons due to fire or explosion. Use only certified power adapters or batteries supplied by
the manufacturer or authorized retailers. · Ensure to install the correct screw models on your Notebook PC to prevent damage.
Table of Contents
Service Overview ASUS TUF Gaming F15 (FX506H) series Overview Components Top View Components Bottom View Repair Overview Appropriate Tools Keyparts and Related Parts Disassembly steps :
· BOTTOM CASE · BATTERY · SSD · DDR · WIFI CARD · SPEAKER · USB BOARD · FAN (with THERMAL MODULE and MAIN BOARD) · THERMAL MODULE · FX506HF THERMAL MODULE · MAIN BOARD · KEYBOARD MODULE · LCD BEZEL · LCD PANEL · LCD COVER
4
Service Overview
· Carefully read through this Service Guide for a look at various components of the device before performing any service and repairs. · To provide the best service, we have provided the below information for technicians from distributors and resellers to perform the complete device
disassembly and assembly. Before performing the procedures, please be sure to read through the overview in this service guide for component overview to avoid any unwarranted damages to the device hardware. · The following contents include all part numbers mentioned in the service guide are used for reference only, if you need the exact part number for ordering, please refer to the OrderBook. · Due to sales policy difference, the components might have different specifications on the same series product, please refer to E-manual by model. Due to sales policy difference, the components may have different specifications on the same model. If you have any operational issues, please contact the service hotline.
5 Back
Top View
Right View Left View
ASUS TUF Gaming F15 (FX506H) series Overview
Array microphones
(on selected models) Microphone Camera indicator Camera Display panel Air vents Keyboard Capital lock indicator Status indicators Power button Numeric keypad Touchpad
Bottom View
Air vents Compartment cover
Audio speakers USB 3.2 Gen 1 port Air vents Kensington® security slot
Power (DC) input port LAN port HDMI port USB 3.2 Gen 1 port
Thunderbolt 4 port Headphone/Headset/Microphone jack Audio speakers
6 Back
LCD COVER MODULE
KEYBOARD MODULE
Components Top View
SSD MYLAR
MB RAM ABSORBER
MAIN BOARD
TP-MB FFC
LCD BEZEL
BATTERY
SSD AL FOIL
WIFI CARD
THERMAL MODULE ASSY
LED-MB FFC
BATTERY AL FOIL
HIHGE
(R IMR)
CAMERA
(L IMR) BASE BATTERY GASKET
15.6` LCD
SSD
MIC RUBBER
DDR
USB BOARD
CPU FAN GPU FAN
LED BD
BEZEL COSMETIC MYLAR
BASE CASE
SSD ABSORBER
DIMM COVER MYLAR Only for FX506HM
USB-MB FFC
SPEAKER
DC JACK CABLE 8PIN
SSD GASKET
7 Back
LCD COVER MODULE
LCD COVER TAPE 1*2PCS
KEYBOARD MODULE
Components Bottom View
BASE CASE
EDP CABLE
WIFI ANTENNA
USB BOARD
THERMAL MODULE ASSY
LCD BEZEL LCD BEZEL ADHESIVE
MAIN BOARD
LED BD
8 Back
Repair Overview
This chapter describes disassembly and assembly (Assemble document please look up from the last page), please follow the information provided in this section to perform the complete disassembly procedure.
Precautions: Before you perform any service or repair on the notebook, please pay special attention to the cautions prevent any damages to the notebook.
1. Be sure that the notebook is powered down. 2. Before disassembling any part, please disconnect all power source. ex: AC plug/Battery connector/Power protect screw etc.
3. Remove all rings, watches and any other metal objects from your hands.
9. Screw Appearance Criteria: If the screws have the following damaged appearance, please do not use. a. Shape deformed. b. Damaged head unable to drive in or the stripped screw. c. Damaged unable to securely tighten. d. Paint scratched off. e. Rusty
4. Always wear a ground strap on your hand to protect the notebook from static discharge. 5. Please refer to "ANSI ESD S20.20" about ESD protection measure. 6. Put the disassembled parts in the functional PE BAG to avoid any damages of the
A/B/C/D part.
10. The following chapter includes all part numbers mentioned in service guide are used for reference only, actual part name depends on different SKU, if you need the exact part number for ordering, please refer to the Orderbook.
7. The maintenance environment temperature is 20-30 and humidity is 40% - 70%. 8. To avoid scratching on the surface of machine; please use anti-static and soft materials
to put on desk in repair environment as below photo.
11. Due to sales policy difference, the components may have different specifications on the same model. Please note that all pictures and components shown on Service Guide are for disassembly/assembly description purpose only, so please refer to the actual product for disassemble/assemble.
9 Back
Appropriate Tools
Please prepare and select the appropriate tools to disassemble/assemble for the ASUS TUF Gaming F15 (FX506H) series notebook.
Screwdriver
Please accord to different screw specification to choose different screwdriver and head.
Alcohol 95
Glove
#1
Dust-free Cloth
Plastic Blade
Thermal Pad
PLASTIC CARD T=0.35mm
PLASTIC PICK T=0.5mm
Plastic Tweezers Use a pair of tweezers to remove/insert/tidy up cables.
Thickness Gauge
Thickness compass specification 0.05mm-1.5mm. Use it to measure the gap.
NB LCD MYLAR *6pcs
FCR-AS Thermal Grease
Use it to align panel position.
Magnetism Board Suggest local buy magnetism board to place screw, avoid mix different type screw to cause assembly damage.
1 Bac0k
Disassembly Notice
Step 1 : Remove screws *10pcs. Step 2 : Use plastic blade to pry the bottom case.
1
2
BOTTOM CASE
Screws
QTY
Spec
2 M2.5*14L(4.5,0.8) (K) #1
1 M2.5*5.5L(4.5,0.8) (K)#1 7 M2.5*11L(4.5,0.8) (K) #1
1 M2.5*2.5L+3.5 (4.5,0.8) (K) #1
Torque (kgf-cm) 2.5 2.5 2.5 2.5
Start
The screw is unable to remove from bottom case, so please always loosen it last, and lock it at first.
To avoid the bottom case hook, don't insert plastic blade in each red circle.
Please follow above arrow direction with using plastic blade to pry bottom case in each blue circle location. (To avoid the bottom case hook, please
prying at each blue circle location.)
11
Back
BATTERY
Disassembly Notice Please be sure to pull out adapter and disconnect the battery.
Before disassembly battery connector, please be sure to pull out adapter and disconnect the battery more than ten seconds in order to IC damage.
Step 1 : Disconnect the battery connector. Step 2 : Remove screws *4pcs. Step 3 : Remove BATTERY.
Screws
QTY
3
1
Spec M2.5*5.5L(4.5,0.8) (K)#1 M2.5*4.5L(4.5,0.5) (K)#1
Torque(kgf-cm) 2.5
2.0~2.2
1 Disconnect
Assembly Notice
For replacing the 48W Battery notice. Please paste FA706QE BASE BATTERY GASKET on the 48W Battery as illustrated.
2 3
FA706QE BASE BATTERY GASKET
12 Back
SSD
Disassembly Notice Please be sure to pull out adapter and disconnect the battery.
Step 1 : Remove the screws *2pcs. Step 2 : Remove SSD MYLAR, AL Foil at left side, and remove SSD. Step 3 : Remove SSD at right side. Step 4 : Remove ABSORBER on SSD.
Screws QTY 1
Spec M2*3L (5.6,0.8) (K) #1
Torque (kgf-cm) 2.0
3
Assembly Notice
Please make sure to paste ABSORBER before assembling on the left side SSD.
Align
1
2
4
Tear off
Please use this SSD slot as first priority.
(*2pcs)
13 Back
DDR
Disassembly Notice Please be sure to pull out adapter and disconnect the battery.
Step 1 : Tear off the SODIMM ABSORBER MYLAR. Step 2 : Unlock DDR. Step 3 : Remove DDR.
1
3
Assembly Notice
First, please paste ABSORBER on the front and backside of DDR before inserting it into the slot.
Tear off
2
Align
For FX506HM: Paste the SODIMM ABSORBER MYLAR*1 pcs on the DDR Module as illustrated.
(*2pcs) (*4pcs)
Choose by GPU/VGA CHIP Model FX506HM NVIDIA GN20-E3 FA506QE DIMM MYLAR FX506H
14 Back
WIFI CARD
Disassembly Notice Please be sure to pull out adapter and disconnect the battery.
Step 1 : Remove THERMAL SSD PAD. Step 2 : Disconnect the RF CABLE connector *2pcs. Step 3 : Remove the screw *1pcs. Step 4 : Remove WIFI CARD.
Screws QTY 1
Spec M2*3L (5.6,0.8) (K) #1
Torque (kgf-cm) 2.0
1
3
Assembly Notice
Please according to below image to assemble RF cable and RF cable tape.
2 Disconnect
4
15 Back
SPEAKER
Disassembly Notice Please be sure to pull out adapter and disconnect the battery.
Step 1 : Release the tape. Step 2 : Release the tape. Step 3 : Disconnect the SPEAKER connector. Step 4 : Remove SPEAKER.
3 Disconnect
Assembly Notice
For Speaker assembly, please follow the mark below to tidy cable.
1 Release
2 Release
4 Remove
16 Back
USB BOARD
Disassembly Notice Please be sure to pull out adapter and disconnect the battery.
Step 1 : Disconnect the FFC connector. Step 2 : Remove screw *1pcs and remove USB BOARD.
Screws QTY 1
Spec M2*3L (5.6,0.8) (K) #1
Torque (kgf-cm) 2.0
Assembly Notice
If FFC is damage during disassembly, please replace new one. Here are some samples of FFC damage:
1 Disconnect
2 Remove
17 Back
FAN (with THERMAL MODULE and MAIN BOARD)
Disassembly Notice Please be sure to pull out adapter and disconnect the battery.
Step 1 : Disconnect (yellow mark) connectors *9pcs then remove TP-MB FFC*1pcs. Step 2 : Remove(Red and blue mark) screws *8pcs. Step 3 : Remove MB with Thermal and FAN module. Step 4 : Remove FAN *2pcs.
Screws QTY
Spec
Torque (kgf-cm)
3 M2.5*5.5L(4.5,0.8) (K)#1
2.0
5 M2*4L (4.3,0.5) (K) W-NI
2.0
1 Disconnect (Yellow mark)
3 Remove module (MB+Thermal+FAN)
4 Remove FAN
Assembly Notice
If FFC is damage during disassembly, please replace new one. Here are some samples of FFC damage:
2
(TP-MB FFC*1pcs)
2 Remove
FX506HF ONLY
(Red and blue mark) screws
Please use the correct technique to take fans off to avoid getting out of shape.
18 Back
THERMAL MODULE
Disassembly Notice Please be sure to pull out adapter and disconnect the battery.
Step 1 : Please follow the reverse screws numbers to remove screws *8pcs. Step 2 : Remove the THERMAL MODULE from MB.
Recommend that the force point is at green block, and pull up thermal module to take it out. Do not pull up at red block and also notice the thermal pipe should not have deformation.
1
5 83 2
Screws QTY 8
Spec M2*4L (4.3,0.5) (K) W-NI
Torque (kgf-cm)
2.0
Assembly Notice
Step-1 THERMAL MODULE Location:[VRAM/CHOKE/MOS] Material: FCR-AS Grease
14 76
MB Location:[GPU/CPU] Material: TH PAD PTM7958)
Step-2 Please follow the screws numbers to lock screws *8pcs.
2
IMPORTANT! Thermal paste, thermal pads, liquid metal, or other thermal interface materials must be thoroughly removed and replaced if this component is removed. Ensure that replacement materials are available before proceeding, or contact an authorized service center for assistance.
WARNING! The heat sink contains liquid metal and should only be removed by authorized service personnel. Significant damage may occur to motherboard components if the heat sink is improperly removed.
19 Back
FX506HF THERMAL MODULE
Disassembly Notice Please be sure to pull out adapter and disconnect the battery.
Step 1 : Please follow the reverse screws numbers to remove screws *8pcs. Step 2 : Remove the THERMAL MODULE from MB.
Recommend that the force point is at green block, and pull up thermal module to take
it out. Do not pull up at red block and also notice the thermal pipe should not have
deformation.
1
5
83 2
Screws QTY 8
Spec M2*4L (4.3,0.5) (K) W-NI
Torque (kgf-cm)
2.0
Assembly Notice
Step-1 THERMAL MODULE Location:[VRAM/CHOKE/MOS] Material: FCR-AS Grease
7
61 4
MB Location:[GPU/CPU] Material: TH PAD PTM7958)
Step-2 Please follow the screws numbers to lock screws *8pcs.
2
IMPORTANT! Thermal paste, thermal pads, liquid metal, or other thermal interface materials must be thoroughly removed and replaced if this component is removed. Ensure that replacement materials are available before proceeding, or contact an authorized service center for assistance.
WARNING! The heat sink contains liquid metal and should only be removed by authorized service personnel. Significant damage may occur to motherboard components if the heat sink is improperly removed.
20 Back
Mainboard connector placement
VGA FAN USB/MB FFC TP/MB FFC
K/B FPC Supports using JIG BOARD to refresh F1 BIOS.
MAIN BOARD
LED/MB FFC
BATTERY
CPU FAN
BL FPC
EDP CABLE
SPEAKER
21 Back
MAIN BOARD
Materials on mainboard
Parts marked in yellow can be ordered/replaced separately at L2 repair level. When L3/L4 repair finished, no need to paste new one if shortage of this material on the MB.
Choose by GPU/VGA CHIP Model
FX506HM NVIDIA GN20-E3 FA506IV N18E CPU ABSORBER
FX506HE NVIDIA GN20-P1 FX506HC NVIDIA GN20-P0
FA506IV N18E CPU ABSORBER
FA506IV MB TOP MYLAR
FX505GE CPU BKT ASSY
FA506IV IO SPONGE
Choose by GPU/VGA CHIP Model
FX506HM NVIDIA GN20-E3 FA506IV N18E GPU ABSORBER
FX506HE NVIDIA GN20-P1 FX506HC NVIDIA GN20-P0
FA506IV N18E CPU ABSORBER
Choose by GPU/VGA CHIP Model
FX506HC NVIDIA GN20-P0 FX506HM GPU BKT ASSY
FX506HE NVIDIA GN20-P1
FX506HM NVIDIA GN20-E3 FA506QM GPU BKT-AMD ASSY
Choose by GPU/VGA CHIP Model
FX506HC NVIDIA GN20-P0 FX706HC MB G20 GPU TOP ABSORBER
FX506HE NVIDIA GN20-P1
22 Back
MAIN BOARD
Materials on mainboard
Choose by GPU/VGA CHIP Model
Parts marked in yellow can be ordered/replaced separately at L2 repair level. When L3/L4 repair finished, no need to paste new one if shortage of this material on the MB.
FX506HM NVIDIA GN20-E3
FA506QM G20 GPU ABSORBER
Choose by GPU/VGA CHIP Model
FX506HC NVIDIA GN20-P0 FX506HE NVIDIA GN20-P1
FA506QE DIMM MYLAR
Choose by GPU/VGA CHIP Model FX506HM NVIDIA GN20-E3 FA506QM N18E G20 GPU MYLAR-E3
FX506HC FX506HE
NVIDIA GN20-P0 NVIDIA GN20-P1
FA506IV N18P GPU MYLAR
Choose by GPU/VGA CHIP Model FX506HC NVIDIA GN20-P0 FX506HE NVIDIA GN20-P1 FX507ZE RAM UNDERSIDE MYLAR FX506HM NVIDIA GN20-E3
Choose by GPU/VGA CHIP Model
FX506HM NVIDIA GN20-E3 FA506IV DIMM COVER MYLAR
23 Back
FX506HF MAIN BOARD
Materials on mainboard
Parts marked in yellow can be ordered/replaced separately at L2 repair level. When L3/L4 repair finished, no need to paste new one if shortage of this material on the MB.
FA506IV N18P GPU MYLAR
FA506IV N18E GPU ABSORBER
FA506IV N18E CPU ABSORBER
FA506IV MB TOP MYLAR
FX506HM GPU BKT ASSY
FA506IV IO SPONGE
FA506QE DIMM MYLAR
FX507ZE RAM UNDERSIDE MYLAR
FX505GE CPU BKT ASSY
FX506HC MB G20 GPU TOP ABSORBER
24 Back
KEYBOARD MODULE
Disassembly Notice Please be sure to pull out adapter and disconnect the battery.
Step 1 : Remove the LED BD and FFC. Step 2 : Remove screws *4pcs. Step 3 : Remove the KEYBOARD MODULE. Step 4 : Remove the DC JACK CABLE.
1
2
Screws QTY 4
Spec
Torque (kgf-cm)
M2.5*5.5L(4.5,0.8) (K)#1
2.5
Assembly Notice
Please refer below picture to organize EDP cable while repair device, it's to keep device safety. P1. EDP cable need to following yellow dotted line to
organize EDP cable, DO NOT pass through hinge.
P2. After assemble hinge as picture.
3 Open and remove
4
Disconnect
The TOP LED SPONGE and LED BD AL FOIL are not reusable after disassembly LED BOARD, before assembly LED BOARD Module, please follow the steps below to paste the new TOP LED SPONGE and LED BD AL FOIL.
Step1 : Paste TOP LED SPONGE *1pc
Step3 : Assembly LED BD with FFC
Step2 : Paste LED BD AL FOIL *1pc
25 Back
LCD BEZEL
Disassembly Notice Please be sure to pull out adapter and disconnect the battery.
Step 1 : Remove BEZEL COSMETIC MYLAR *2pcs. Step 2 : Remove screws *2pcs. Step 3 : Remove LCD BEZEL.
Screws QTY 2
Spec
Torque (kgf-cm)
M2.5*3.5L(4.5,0.5) (K)#1
2.5
1 2
Step 3-4 Due to some tapes behind the lower edge of bezel, please using plastic blade to teardown the bezel. Please follow the direction shown in the red arrow, to move plastic blade from left to right and peel the bezel away slowly. While peeling, please move the blade in the parallel direction to the panel and pressing the black Mylar downward (As circled in green) to ensure the black Mylar and the tape behind the bezel are well separated.
Please move blade slowly to separate the bezel away, and must press the black Mylar downward with panel parallel direction..
3
Panel's black Mylar
Step 3-1~3-3, Start from the middle area of each side of bezel, Using the forefinger to hold the outer edge firmly and the thumb flipping the bezel inner edge outward to release the hooks as indicated in the diagram shown. (It can be helpful, if holding the bezel outer edge firmly with forefinger.)
3-3
Step 3-1~3-3
Assembly Notice
Thumb flipping the inner edge outward.
3-1
3-2
3-4
When reuse the LCD BEZEL: Please paste new LCD BEZEL ADHESIVE before assembly BEZEL. (New LCD BEZEL already contains LCD BEZEL ADHESIVE *1pcs)
LCD BEZEL ADHESIVE
26 Back
LCD PANEL
Disassembly Notice Please be sure to pull out adapter and disconnect the battery.
Step 1 : Remove screws *6pcs, and remove hinges *2pcs. Step 2 : Pull out LCD adhesive *2pcs. Step 3 : Remove LCD PANEL.
1
Screws
QTY
Spec
4
M2.5*3.5L(4.5,0.5) (K)#1
2 M1.6*2.5L(3.5,0.4)(K) #0
Torque (kgf-cm) 2.5 1.6
2
Please pull the adhesive up about 30 degree slowly, and don't pull out the tape in vertical direction!
3 Flip up the panel, and disconnect the EDP cable.
3-1 3-2
30
27 Back
LCD COVER
Disassembly Notice Please be sure to pull out adapter and disconnect the battery.
Step 1 : Disconnect Camera connector. Step 2 : Remove the CAMERA. Step 3 : Remove MIC RUBBER *2pcs.
1 2
Disconnect
3
MIC RUBBER
Assembly Notice
Please follow the yellow mark to tidy EDP cable.
28 Back
LCD PANEL and LCD Cover
Assembly Notice Please be sure to pull out adapter and disconnect the battery.
A When reuse the LCD PANEL: Please use the fingertip to clean the residual glue on PANEL or BEZEL.
C When assembly the LCD PANEL: (The following is an operation example) Step 1 : Remove release paper of LCD Adhesive *2pcs. Step 2 : Assembly and align the LCD to the upper side of the LCD Cover.
Remove
Align
Release paper
B When replace the LCD: Please paste new LCD COVER TAPE *2pcs.
LCD COVER TAPE
29 Back
適用於 Microsoft 365 的 Microsoft PowerPoint