Acuity Brands Lighting
Hydrel | Architectural Outdoor Lighting | Acuity BrandsBuy American and Build America, Buy America | Acuity BrandsPaint Colors | Resources | Acuity Brands
Instruction Manual for HYDREL models including: HSL11, HSL11 Static White and Static Color, Static White and Static Color, White and Static Color, Static Color
Read all instructions before installation. Do not make live connections! POWER SUPPLY / DIMMING. NON-DIMMING INSTALLATIONS (For non-dimming, ...
26 janv. 2023 — Integral Driver. • Short, Medium, and Long throw distributions. • Standard 0-10V dimming option. • Die-cast housing with solid aluminum, brass, or stainless.
File Info : application/pdf, 4 Pages, 744.82KB
DocumentDocumentCATALOG NUMBER ® NOTES TYPE HSL11 Static White and Static Color Step Light 11 HIGHLIGHTS · Integral Driver · Short, Medium, and Long throw distributions · Standard 0-10V dimming option TM · Die-cast housing with solid aluminum, brass, or stainless steel faceplate · Wet location listed · Back Box provided by Hydrel or by others · Suitable for concrete pour if BB option is chosen or Steel City back box is used DIMENSIONS RECTANGLE Steel City 'CX' series or equivalent (by others) 4.60" 2.50" Integral driver 3.50" LED module with concealed optic Ribbed design with matte black finish to reduce glare CROSS SECTION ROUND 4.60" Steel City 'CX' series or equivalent (by others) Steel City 'CX' series or equivalent (BB option by Hydrel or by others) Ribbed design with matte black finish to reduce glare Integral driver 3.50" LED module with concealed optic CROSS SECTION SQUARE Steel City 'CX' series or equivalent (by others) 4.60" Integral driver 4.60" Ribbed design with matte black finish to reduce glare 3.50" CROSS SECTION LED module with concealed optic Steel City 'CX' series or equivalent (BB option by Hydrel or by others) Steel City 'CX' series or equivalent (BB option by Hydrel or by others) © 2015-2023 Acuity Brands Lighting, Inc. · One Lithonia Way Conyers GA 30012 Phone: 800-705-SERV (7378) · www.hydrel.com LUMEN PACKAGES Distribution Delivered Lumens Input Watts Short 36 3 Medium 42 3 Long 54 3 Performance data based upon 30K LED 80CRI Lumens/ Watt 12 14 18 HSL11 | Rev. 01/26/23 Page 1 of 4 ® HSL11 STEP LIGHT | 2 ORDERING INFORMATION EXAMPLE: HSL11 SQ LED 27K MVOLT L MIN5 BRB Series* HSL11 Step Light 11 Shape* RECT RD SQ Rectangle Round Square Source* LED Color Temperature* 27K 2700K 30K 3000K 35K 3500K 40K 4000K 50K 5000K AMBLW BLU GRN RED CYN RDO Amber Limited Wavelength 590 nm Blue Green Red Cyan Red-Orange Voltage* MVOLT Multi-Volt 120V thru 277V Distribution* L Long Throw M Medium Throw S Short Throw Dimming Optional MIN5 Dimming Driver OPTION Finish* BB Back Box Note: Include BB if you need a back box, otherwise back box is by others. Note: Suitable for concrete pour if BB option is chosen or Steel City back box is used BRB Brushed Brass BBP Brushed Brass Paint BRSS Brushed Stainless Steel LBPS Light Bronze Paint Smooth PBR Polished Brass PSS Polished Stainless Steel SGB Semi Gloss Black SGW Semi Gloss White CF Custom Finish RALTBD Ral Paint Finishes Note: RALTBD for pricing only, replace with applicable RAL call out when ready to order. See the RALBROCHURE for available options. It is recommended that Hydrel products only use textured paint. Note: * is a required field PERFORMANCE DATA 18" L Approx 10'-0" M S Approx Approx 4'-0" 3'-0" Typical Distribution Based on 30K Grid in 1' increments Lumen Multiplier Table for CCT CCT 27K 30K 35K 40K 50K Multiplier 0.888 1.000 1.031 1.047 1.056 0.1 0.1 1.0 1.0 5.0 5.0 10.0 10.0 Short Medium Expected Life: Static White LED: L70 @ 60,000 hours Static Color LED: L70 @ 60,000 hours OPERATING TEMPERATURE: -40°C through 45°C 0.1 1.0 5.0 10.0 Long BUG RATING CHART SERIES CCT Distribution HSL11 30K S Short Throw Note: For full report see IES file. BUG Rating B0U0G0 © 2015-2023 Acuity Brands Lighting, Inc. · One Lithonia Way Conyers GA 30012 Phone: 800-705-SERV (7378) · www.hydrel.com HSL11 | Rev. 01/26/23 Page 2 of 4 ® WIRING & DIMMING POWER SUPPLY / DIMMING Dimming drivers require a 0-10V fluorescent-type dimming control. Read all instructions before installation. Do not make live connections! NON-DIMMING INSTALLATIONS (For non-dimming, cap off the grey and purple wires seperately) Connect STEP WHITE wire to power NEUTRAL. Connect STEP BLACK wire to power HOT. Connect STEP GREEN wire to power GROUND. 120V or 277V WHITE BLACK GREEN HSL11 STEP LIGHT | 3 To other STEP fixtures WHITE BLACK GREEN WHITE BLACK GREEN WHITE BLACK GREEN WHITE BLACK GREEN WHITE BLACK GREEN DIMMING INSTALLATIONS The integral dimming driver is designed to the 0-10V IEC dimming specification 60929 and is compatible with common 0-10V dimmers and dimming systems. Do NOT connect line voltage to dimming input wires. Connect STEP WHITE wire to power NEUTRAL. Connect STEP BLACK wire to power HOT. Connect STEP VIOLET wire to POSITIVE INPUT of Dimming Control. Connect STEP GREY or PINK wire to NEGATIVE INPUT of Dimming Control. 120V or 277V WHITE BLACK GREEN To other STEP fixtures WHITE BLACK GREEN WHITE BLACK GREEN WHITE BLACK GREEN WHITE BLACK GREEN WHITE BLACK GREEN 0-10V (+) Dimmer (-) VIOLET GREY or PINK To other STEP fixtures VIOLET GREY or PINK VIOLET GREY or PINK VIOLET GREY or PINK VIOLET GREY or PINK VIOLET GREY or PINK © 2015-2023 Acuity Brands Lighting, Inc. · One Lithonia Way Conyers GA 30012 Phone: 800-705-SERV (7378) · www.hydrel.com HSL11 | Rev. 01/26/23 Page 3 of 4 ® HSL11 STEP LIGHT | 4 SPECIFICATIONS & FEATURES Construction Die-cast housing with solid aluminum, brass, or stainless steel faceplate. Two visible fasteners. Source Light source is a single powerful LED available in five static white color temperatures/80CRI & six colored LED choices. All within 3MacAdam ellipse Optics Concealed optic is available in three light distribution patterns. Short for narrow corridors, Medium for wide corridors, and Long for large area illumination. Electrical Integral electronic driver for 120 through 277v/50-60Hz input. Standard 0-10V dimming to 5%. THD: <20%. PFC: > 0.90. Complies to FCC CFR Title 47 Part 15, Class B at 120v and Class A at 277v EMI noise rating. Mounting Fixture designed to mount to a Steel City CX single gang deep junction box (BB option from Hydrel or by others) or equivalent. Lens Extruded clear acrylic optic lens concealed in reflector housing. Circuiting Single circuit Environment Wet location. BUY AMERICAN ACT: This product is assembled in the USA and meets the Buy America(n) government procurement requirements under FAR, DFARS and DOT regulations. Please refer to www.acuitybrands.com/ resources/buy-american for additional information. Listing ETL / cETL Finish Recessed surfaces have a ribbed design with matte black finish to reduce glare. Faceplates are available in four metal finishes with protective clear coat or one of four polyester powder coat painted finishes. Warranty 5-year limited warranty. This is the only warranty provided and no other statements in this specification sheet create any warranty of any kind. All other express and implied warranties are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-conditions NOTE: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice. © 2015-2023 Acuity Brands Lighting, Inc. · One Lithonia Way Conyers GA 30012 Phone: 800-705-SERV (7378) · www.hydrel.com HSL11 | Rev. 01/26/23 Page 4 of 4