Thomas Payne Heritage Theater Seating

Introduction

Thomas Payne® furniture is shipped partially assembled. For additional information or to order replacement kits, visit lci1.com/support or use the LippertNOW app. The LippertNOW app is available on the Apple App Store® for iPhone® and iPad®, and on Google Play™ for Android™ users. App Store® and iPad® are registered trademarks of Apple Inc. Google Play™ and Android™ are trademarks of Google Inc.

Safety

[CAUTION] The "CAUTION" symbol indicates a safety risk that may cause personal injury or product/property damage if not followed.

[WARNING] The "WARNING" symbol indicates a safety risk that may cause death, serious personal injury, or severe product/property damage if not followed.

[WARNING] Ensure the furniture is completely unplugged from any electrical socket to avoid electrical shock.

Parts List

Installation

1. The seating comes with the back laying on top of the seat cushion (See Fig.1).

   Fig.1 Description: Illustration shows a theater seat with the back cushion laid flat on top of the seat base.

2. Lift the seat back and align it with the brackets on the seat base (See Fig.2 and Fig.3).

   Fig.2 Description: Illustration shows a person lifting the seat back and aligning it with brackets on the seat base.

   Fig.3 Description: Illustration shows the seat back being attached to the seat base. Inset A highlights the clips on the seat back sliding down over the bottom brackets on the seat base.

3. The seat back is fully installed when the clips on the seat back (Fig.3 Inset A) slide down over the bottom brackets on the seat base and click into place.

4. Every furniture component locks into place with each adjacent piece. To lock the components, line up the side brackets and slide them down (See Fig.4).

   Fig.4 Description: Illustration shows the side brackets of one furniture component being aligned and slid down to lock into the adjacent piece.

5. Plug in power after all pieces have been assembled (See Fig.5).

   Note: If a center console was purchased, it includes a wireless phone charger. The male plug is located at the bottom of the base. Plug into a wall outlet for power.

   Fig.5 Description: Illustration shows a power cord with a plug connecting to a wall outlet. A note mentions a wireless phone charger in the center console.

Manual Information and Support

Manual information may be distributed as a complete document only, unless Lippert provides explicit consent to distribute individual parts. All manual information is subject to change without notice. Revised editions will be available for free download at lippert.com. Manual information is considered factual until made obsolete by a revised version.

Please recycle all obsolete materials and contact Lippert with concerns or questions.