Assembly Instruction
Scan for Assembly Instruction Video
FantasMall Acrylic Display Case for LEGO® Collections
FANTAS
Important Safety Information
Read instructions before assembling!
Warning: Do not let children use or play with the parts!
⚠ For AGE 12+ only!
CHOKING Hazard: Small Parts.
Keep away from children and pets!
List of Parts
- Corner Connector[Image: A small, blue, triangular plastic piece with holes for pins.]
- L-Shape Connector[Image: A small, blue, L-shaped plastic piece with holes for pins.]
- Pin[Image: A small, silver, T-shaped metal pin.]
- Pin-Sleeve[Image: A small, blue, cylindrical plastic sleeve component that receives the pin.]
- Top board[Image: A large, flat, clear acrylic rectangular panel labeled "Top". It has small holes along its edges.]
- Base board[Image: A large, flat, clear acrylic rectangular panel labeled "Base board". It has small holes along its edges.]
- Front board[Image: A large, flat, clear acrylic rectangular panel labeled "Front". It has small holes along its edges.]
- Back board[Image: A large, flat, clear acrylic rectangular panel labeled "Back". It has small holes along its edges.]
- Left board[Image: A large, flat, clear acrylic rectangular panel labeled "Left". It has small holes along its edges.]
- Right board[Image: A large, flat, clear acrylic rectangular panel labeled "Right". It has small holes along its edges.]
Note: Front and back boards are identical. Left and right boards are identical.
Note: The bulge side of panels should be facing the base board.
Connector Location
Ensure connectors are placed correctly for a secure assembly.
[Image: Diagram showing a blue Corner Connector positioned incorrectly on the outside edge of two brown acrylic panels, with a red 'X' symbol indicating it is wrong.]
[Image: Diagram showing a blue Corner Connector positioned correctly on the inside corner of two brown acrylic panels, with a green checkmark symbol indicating it is correct.]
Corner Connector should stay inside the case.
[Image: Diagram showing a blue L-Shape Connector positioned incorrectly on the outside edge of two brown acrylic panels, with a red 'X' symbol indicating it is wrong.]
[Image: Diagram showing a blue L-Shape Connector positioned correctly on the inside corner of two brown acrylic panels, with a green checkmark symbol indicating it is correct.]
L-Shape Connector should stay inside the case.
Pin-to-Connector Assembly
Follow these steps to connect pins to the connectors.
[Image: Diagram showing a silver pin being inserted into a blue connector sleeve attached to an acrylic panel.]
[Image: Diagram showing the silver pin fully inserted into the blue connector sleeve, with an arrow indicating insertion direction.]
[Image: Diagram showing a thumb pressing the pin into the blue connector sleeve, with an arrow indicating force direction.]
Press pin into Pin-Sleeve firmly until it makes a 'click' sound.
Panel Assembly Sequence
- Step 1: Secure connectors to the top board.[Image: Diagram showing multiple blue connectors being attached to the edges of the top acrylic panel.]
- Step 2: Connect the left board to the top board and secure L-Shape connectors to the left board.[Image: Diagram showing the left acrylic panel being attached vertically to the top panel, with L-shape connectors securing the connection.]
- Step 3: Connect the front board to the top board and secure L-Shape connectors to the left board.[Image: Diagram showing the front acrylic panel being attached vertically to the top panel and connected to the left panel using L-shape connectors.]
- Step 4: Connect the right board to the top board and secure L-Shape connectors to the left board.[Image: Diagram showing the right acrylic panel being attached vertically to the top panel and connected to the left panel using L-shape connectors.]
- Step 5: Connect the back board to the top board and secure L-Shape connectors to the left board.[Image: Diagram showing the back acrylic panel being attached vertically to the top panel and connected to the left panel using L-shape connectors.]
- Step 6: Flip the assembled structure and secure it onto the base board.[Image: Diagram showing the partially assembled box structure being inverted and placed onto the base acrylic panel, with connectors ready to secure it.]