Instruction Manual for armorgard models including: BB2, BB2 BarroBox Secure Mobile Storage Vault, BarroBox Secure Mobile Storage Vault, Secure Mobile Storage Vault, Mobile Storage Vault, Storage Vault, Vault
Armorgard Barrobox Secure Tool Storage Box On Wheels
File Info : application/pdf, 16 Pages, 253.48KB
DocumentDocumentbarroboxTM Operational & maintenance manual Suitable for: BB2 023 9238 0280 armorgard.co.uk Welcome Welcome to your Armorgard BarroBox, the safest portable security box for your tools and equipment. Please consult this manual for instructions on how to get the most from the unit. Please read this user manual carefully prior to using your BarroBox. 2 Contents Safety information 4 Product specification 5 What's included 6 Tools you'll need 7 Getting to know your BarroBoxTM 8 How to use 10 Storing the unit 11 Transporting the unit 12 Equipment care 13 Ongoing maintenance 13 Warranty 14 Notes 15 3 Safety information Before using the BarroBox, ensure any relevant risk assessments are carried out. Armorgard cannot be responsible for accidents that occur due to negligence. The BarroBox is too heavy to be safely lifted by one person. Carry out a risk assessment before lifting or lowering any BarroBox to ensure there is no risk of injury. The SlamStop lid stay has been added to improve the safety of the box, however, care must be taken to prevent injury when opening and closing the lid. Ensure that the ring pull latch on the wheel adjustment handle has fully engaged into the latching plate. This will help prevent accidental raising or lowering of the wheels. Ensure that the BarroBox is not damaged before using it. Whilst every effort has been made to ensure this operational and maintenance manual covers every aspect needed to operate your product safely, please take care whilst using the product and always operate with caution. Always liaise with management personnel on site for any additional operational restrictions that you need to be aware of. Do Lock the box when leaving unattended Lift SlamStop lid stay when closing lid Carry out risk assessments before lifting Use handles when manoeuvring Don't Lock one side, always use both locks Leave lid unlocked when unattended Raise wheels when manoeuvring Force lid shut 4 Product specification Product Description code BB2 BarroBox Weight (kg) External Dimensions Internal Dimensions W x D x H (mm) W x D x H (mm) 82 770 x 1045 x 716 600 x 797 x 608 5 What's included... 1x BarroBox 3x keys 6 Tools you'll need... One person needed 7 Getting to know your barroboxTM The ultimate portable tool protection for workers on the move. Data plate which lists each unique product serial number Folding handles Puncture-proof wheels Keyed alike 5-lever deadlocks 5-lever deadlock Forklift skids 8 Gas strut arms (300N) Puncture-proof wheels No detachable parts Lifting handle converts BarroBox from mobile to static Recessed handle SlamStop lid stay Gas struts Anti-jemmy features for increased security Suitable for use on-site Product with handles SlamStop lid stay No detachable parts 9 How to use 1. Open the lid to reveal the lever inside. Release the catch which will move the wheels and make the unit mobile. 2. Moving the lever forward lowers the wheels, pulling it back will raise the wheels. Ensure the catch is properly engaged once the wheels are in position. 3. Ensure that nothing is below the body or near the forklift skids when operating the lever. 4. When the wheels are in their lower position, close the lid then use the fold-out handles on the rear of the unit to lift and push the BarroBox. 10 Storing the unit 1. The flat sides and recessed handles of the BarroBox can help save space when storing the unit. 2. Ensure that both locks are secured when leaving the BarroBox unattended. This is essential to uphold the maximum security of the box. 3. When the BarroBox is in position, always ensure the wheels are in their raised position. 11 Transporting the unit The design of the BarroBox makes transporting the product easy. The unit features forklift pockets for transporting with a forklift or pallet truck. The puncture proof wheels make the unit suitable for use on rough terrain. Please note that the product may require more than one person to lift, and it is always advised to lift the product when it is empty of contents. 1. Always secure both locks and remove key before lifting the unit, to ensure that the lid does not open unexpectedly. 2. During transportation, ensure the BarroBox is secured to the carrier using straps or other measures. 3. The wheels should be in their static position when being transported. 12 Equipment care The BarroBox is weatherproof and finished with a durable powder coating, so it is suitable for outdoor use, however it does not mean it is waterproof. It is always important to note that any electrics or equipment susceptible to water damage should be sealed. Always ensure that the product data plate remains visible and in good condition, especially the unique serial number, as this is required should you need a replacement lock or key. Ongoing maintenance It is important to check that the BarroBox is not damaged before every use. We recommend for you to check the lever, handles, locks, SlamStop lid stay, gas struts and wheels every three months, to ensure that the BarroBox can operate fully. If the BarroBox will be under rigorous use, we recommend integrity checking regularly. Always carry out integrity checks before lifting or transporting the unit. 13 Warranty Armorgard products are built to last, and all have a manufacturer's warranty of 12 months please refer to the terms and conditions for what this covers. We also keep replacement keys and offer replacement locks for all Armorgard products up to five years old. All we'll need is the distributor you purchased from and your product's serial number, which can be found on the data plate of every product. Do not force entry into the product, as this could affect the warranty. Always contact us if you require a replacement lock or key. Locks, keys and spare parts Replacement keys Replacement deadlocks SlamStop safety stay Gas struts For additional support and easy access to spare or replacement parts, register your product following the QR code: 14 Notes 15 Find us on social media UK Head Office Unit 14-16 Standard Way, Fareham Industrial Park, Fareham, Hampshire PO16 8XB +44 (0)23 9238 0280 | sales@armorgard.co.uk | www.armorgard.co.uk France Office + 33 (0)4 81 16 06 69 commercial@armorgard.fr www.armorgard.fr Australia Office +61 1300 131 751 sales@armorgard.com.au www.armorgard.com.au New Zealand Office 0800 826 828 sales@armorgard.co.nz www.armorgard.co.nz