FS PDU Power Strips
Quick Start Guide V1.0
Product Models
- PDU-S158N-HBS
- PDU-CEE781-HBS
Usage Guidelines
-
Indoor Use Only
The PDU is designed for indoor use only.
-
Voltage Consistency
Ensure the PDU voltage is consistent with the local voltage.
-
Power Rating
The total power required by connected equipment must not exceed the PDU's maximum load rating.
-
Socket Compatibility
The PDU sockets are compatible with matched plugs only.
-
Installation Location
Install the PDU in dry and ventilated places.
Safety Precautions
-
No User Serviceable Parts
Do not drill into or attempt to open any part of the PDU. There are no user-serviceable parts inside.
-
Immediate Stop
Stop using it immediately if any disorder happens.
-
Lightning Storm Warning
Never install any electrical wiring, equipment, or PDUs during a lightning storm.
Installation
The following steps illustrate how to mount the PDU in a standard equipment rack.
Step 1: Identify Components
You will need the PDU unit, mounting brackets (4x), and screws (4x).
Step 2: Attach Brackets
Secure the mounting brackets to the sides of the PDU using the provided screws.
Step 3: Rack Mounting
Align the PDU with the desired mounting location in the equipment rack and slide it into place. The brackets will secure the PDU to the rack rails.
[Illustration shows PDU-S158N-HBS and PDU-CEE781-HBS models. Step 3 shows 4x screws and 4x brackets. Step 4 illustrates attaching brackets to the PDU and then mounting it into a server rack, with close-ups of bracket attachment and rack insertion.]
