Test Setup Photo(s) of Radiated Emissions Measurement
The following figures illustrate the test setup configurations used for measuring radiated emissions from the Equipment Under Test (EUT).
Fig. 1: Shows the overall test environment, a large anechoic chamber equipped with measurement antennas and the EUT setup for radiated emissions testing.
Fig. 2: Provides a closer view of the EUT and associated equipment within the anechoic chamber during the radiated emissions measurement.
Test Setup Photo(s) of Conducted Emissions Measurement
The following figure shows the test setup for measuring conducted emissions from the EUT.
Fig. 3: Depicts the test bench configuration for conducted emissions measurements, including the EUT, measurement receiver, and necessary cabling.
