Manuals+

Miele DAH Series Cooker Hood Installation Guide

Introduction

This document provides essential installation instructions for Miele DAH series cooker hoods. Please read all instructions carefully before proceeding with the installation and initial operation.

Supported models include: DAH 1650, DAH 1850, DAH 1950, DAH 2660, DAH 2860, DAH 2960, DAH 2960 EXTA, DAH 4870, DAH 4970, DAH 4980.

Installation Configurations

The cooker hood can be installed in different ventilation configurations:

Diagrams illustrate the airflow paths for these configurations.

Installation Steps

  1. Step 1: Mounting Preparation

    Determine the desired mounting location. Mark the positions for wall mounting brackets based on the provided dimensions. Specific dimensions are indicated for various DAH models (e.g., 380 DAH 1x50, 380 DAH 2x60, 371 DAH 4xx0) and the DADC 1000 accessory. An information icon [i] suggests referring to additional details.

  2. Step 2: Wall Mounting

    Attach the mounting brackets to the wall. The diagram shows the use of wall plugs and screws. Fasteners specified include 6x 8x50mm screws and 4x 5x60mm T30 screws.

  3. Step 3: Securing Mounting Plate

    Secure a mounting plate to the wall using 2x T30 screws. A hole of approximately 15mm diameter is indicated for this step.

  4. Step 4: Opening the Hood

    Open the cooker hood by lifting or sliding panels, as indicated by curved arrows.

  5. Step 5: Inserting Components

    Insert a filter component (labeled 1) and another part (labeled 2) into the cooker hood assembly.

  6. Step 6: Further Hood Opening

    Continue to open the cooker hood to access internal components.

  7. Step 7: Attaching Grille

    Attach the main grille to the cooker hood. This step requires 2x T20 screws and is specified for models DAH 2x60, DAH 4x70, and DAH 4980.

  8. Step 8: Mounting Fan Support Plate

    Attach a support plate for the fan assembly using 2x T20 screws.

  9. Step 9: Securing Fan Assembly

    Secure the fan assembly into its designated position. A close-up view illustrates the attachment method.

  10. Step 10: Securing Fan Unit

    Fasten the fan unit in place using 4x T20 screws.

  11. Step 11: Inserting Filters/Components

    Insert a component (labeled 1) and then a filter (labeled 2) into the cooker hood.

  12. Step 12: Connecting Model-Specific Parts

    Connect specific components for different model series, including DAH 1x50, DAH 4x70, DAH 4980, and DAH 2x60, DAH 2960 EXTA. A 'Click' action indicates proper engagement.

  13. Step 13: Securing Internal Parts

    Secure internal components using 4x T20 screws.

  14. Step 14: Detail of Securing Mechanism

    A detailed illustration shows a specific securing mechanism.

  15. Step 15: Attaching Bracket

    Attach a bracket to the unit using 2x T20 screws.

  16. Step 16: Attaching Final Grille

    Attach the final grille component using 2x T20 screws. This step is specified for models DAH 2x60, DAH 4x70, and DAH 4980.

  17. Step 17: Securing Fan with Screw

    Secure the fan assembly using 1x T20 4.0x14 screw.

  18. Step 18: Connecting Ducting and Power

    Connect the exhaust ducting to the fan outlet. Connect the electrical power cord and plug it into a suitable electrical socket.

  19. Step 19: Attaching Upper Grille

    Attach an upper grille component, indicated by arrows, for models DAH 2x60, DAH 4x70, and DAH 4980.

  20. Step 20: Securing Flange

    Secure a circular flange component to the unit using 4x T20 screws.

  21. Step 21: Connecting Ducting Components

    Connect various ducting components for different model series, including DAH 2x60, DAH 2960 EXTA, and DAH 1x50, DAH 4x70, DAH 4980. Arrows show the direction of connection.

  22. Step 22: Mounting Hood to Wall

    Mount the cooker hood securely to the wall using the provided brackets and screws. Connect the necessary ducting and electrical wiring.

  23. Step 23: Attaching Front Panel

    Attach the front panel or door of the cooker hood. This is secured using 2x T30 screws, with arrows indicating the panel's movement.

  24. Step 24: Final Securing of Unit

    Complete the installation by securing the unit to the wall using 2x 5x60mm T30 screws.

  25. Step 25: Referencing Information Booklet

    A diagram indicates the importance of consulting the information booklet [i] for further details.

  26. Step 26: Attaching Mounting Plate

    Attach a specific mounting plate as part of the installation process.

  27. Step 27: Securing Components

    Secure various components using fasteners, including 2x T20 screws and 1x T20 screw.

  28. Step 28: Connecting Power Plug

    Connect the appliance's power plug to an electrical socket to complete the electrical setup.

Manufacturer Information

Miele & Cie. KG

Carl-Miele-Straße 29

33332 Gütersloh

Germany

Tel.: +49 5241 89-0

Internet: www.miele.com

Models: DAH 1650, DAH 1850, DAH 1950, DAH 2660, DAH 2860, DAH 2960, DAH 2960 EXTA, DAH 4870, DAH 4970, DAH 4980, DAH 1650 Cooker Hood, Cooker Hood, Hood

File Info : application/pdf, 28 Pages, 3.37MB

PDF preview unavailable. Download the PDF instead.

01 C7F1383812631EEEA5B865A95A619A6A

References

SCHEMA ST4 ST4 PDF Engine (Build 12.0.1.0)

Related Documents

Preview EU Declaration of Conformity - Miele Rangehoods
Official EU Declaration of Conformity for Miele rangehoods, detailing compliance with relevant EU directives and harmonized standards. Includes product designations and manufacturer information.
Preview Miele Liesituuletin Käyttö- ja Asennusohje
Käyttö- ja asennusohje Miele liesituulettimelle. Sisältää turvallisuusohjeet, käyttöönottotoimenpiteet, käyttöohjeet, puhdistus- ja hoito-ohjeet, asennusohjeet ja tekniset tiedot.
Preview Miele Exaustor: Instruções de Utilização e Montagem
Guia completo de instruções de utilização e montagem para o exaustor Miele, cobrindo segurança, instalação, operação e manutenção.
Preview Miele DAH 1650 Active Kitchen Hood Energy Label and Specifications
Energy efficiency details for the Miele DAH 1650 Active kitchen hood, including its energy class (B), annual consumption (56 kWh/annum), and noise level (60dB), based on EU Regulation 65/2014.
Preview Miele Product Designation and Code List
A comprehensive catalog listing Miele product designations, model names, and associated regional or certification codes (e.g., F, EU1, EU3, CE, ANL, A, CH).
Preview Miele Cooker Hood Operating and Installation Instructions
Comprehensive guide for Miele cooker hoods (models DA 2668, DA 2698, DA 2628, DA 2698 EXTA) covering safe operation, installation, cleaning, maintenance, and technical specifications.
Preview Miele DAS Series Cooker Hood Installation Guide - DAS 2x20, DAS 4x20, DAS 4x30 Models
Official installation manual for Miele DAS series cooker hoods, including models like DAS 2x20, DAS 2x20 EXTA, DAS 4x20, DAS 4x30, DAS 2620, DAS 2920, DAS 4620, DAS 4920, DAS 4630, DAS 4930, DKFS 31-P, DKFS 31-R, DUU 151, DUU 150. Features detailed diagrams, measurements, and assembly instructions for proper mounting and setup.
Preview Miele DA 3466 HP Cooker Hood: Features, Specifications, and Dimensions
Detailed information on the Miele DA 3466 HP cooker hood, including its design, controls, special features, extraction rates, installation requirements, and dimensions. Learn about this slimline, 60 cm wide kitchen appliance.