JBL Wind 3 Quick Start Guide

Bicycle Mount

1. Install the included mounting bracket onto bicycle handlebars.

2. Dock/undock the speaker into the mounting bracket effortlessly.

What's in the Box

• JBL Wind 3 Speaker
• Bracket
• Non-slip pads (big)
• Non-slip pads (small)
• Plastic screw
• USB cable
• QSG

Buttons

• Power On/Off: Press to turn the device on or off.
• Source Switch: Press to switch between modes (Bluetooth, FM Radio, TF/AUX-in).
• Tune Up (FM) / Next Track (BT/TF): Press to tune up the FM station or skip to the next track in Bluetooth/TF mode.
• Tune Down (FM) / Previous Track (BT/TF): Press to tune down the FM station or go to the previous track in Bluetooth/TF mode.
• Volume Down: Press to decrease the volume.
• Play/Pause*: Press to play or pause music. Long press to switch EQ between 'Sport' and 'Bass' mode.
• Volume Up: Press to increase the volume.
• Call Handling: Short press to answer an incoming call, long press to ignore. Short press to end an ongoing call.

Bluetooth Pairing

1. Turn on the speaker.

2. On your device, go to Bluetooth settings and select 'JBL Wind 3' to connect.

FM Radio

1. Switch the source to FM mode.

2. Tune Down/Tune Up: Press once to manually tune down/up by step. Press twice to tune to the previous/next preset station.

3. Auto Scan: Long press to search for and tune to the previous/next available station automatically.

TF/AUX-in

Insert a TF card to play music or plug in an AUX cable to play music.

Charging

Connect the USB cable to charge the speaker. The charging indicator will show the charging status. Low battery is indicated when the battery is low.

Waterproof & Dustproof IP67

The JBL Wind 3 is waterproof and dustproof with an IP67 rating, meaning it can be submerged in up to 1 meter of water for 30 minutes.

Tech Spec

• Transducer: 43 mm x 47 mm / 1.5"
• Output power: 5 W RMS
• Frequency response: 110 Hz - 20 kHz
• Signal-to-noise ratio: > 85 dB
• Battery capacity: 1050 mAh
• Battery charge time: 2.5 hours (5 V = 1 A)
• Music play time: up to 5 hours (dependent on volume level and audio content)
• Bluetooth® version: 5.0
• Bluetooth® profile: A2DP 1.3, AVRCP 1.6, HFP 1.7
• Bluetooth® transmitter frequency range: 2400 MHz-2483.5 MHz
• Bluetooth® transmitter power: < 5 dBm (EIRP)
• Bluetooth® transmitter modulation: GFSK, π/4 QPSK, 8DPSK
• FM Tuning range: 87.5 MHz - 108 MHz (varies by countries)
• Dimensions (W x H x D): 90 mm x 73.2 mm x 35.8 mm
• Weight: 0.230 kg
• Maximum operation temperature: 45 °C

Safety and Warranty Information

Battery Care: To protect the battery lifespan, charge it fully at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions.

Water Exposure: Do not expose the JBL Wind 3 to liquids without disconnecting the cable. Do not expose the JBL Wind 3 to water while charging. This may result in permanent damage to the power source or speaker.

Cleaning: After exposure to liquids or spills, rinse the speaker with clean water and ensure it is completely dry before charging. Failure to do so may damage the speaker.

External Adapter: When using an external adapter, ensure its output current/voltage does not exceed 5V/3A.

Manufacturer: Harman International Industries, Incorporated, 400 Atlantic Street, Stamford, CT 06901, USA.

Importer (Russia): OOO “HARMAN RUS CIS”, ul. Dvintsev, d. 12, k. 1, Moscow, 127018, Russia.

Warranty Period: 1 year. Service Life: 2 years.

Technical Support: 8 (800) 700-0467.

Bluetooth® Trademarks: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Harman International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Regulatory Information (Brazil): This product is homologated by Anatel, in accordance with the regulatory procedures for conformity assessment, and meets the applicable technical requirements. For more information, consult the Anatel website: www.anatel.gov.br. This equipment does not have the right to protection against harmful interference and may not cause interference in properly authorized systems.

Harmful Substances Information (China): The table indicates the names and contents of harmful substances in the product's components. The 'environmentally friendly use period' (ten years) means that hazardous substances contained in electronic information products will not leak or mutate under normal use conditions, and users will not cause serious pollution to the environment or serious damage to their property or personal safety within ten years.

Recycling Information (China): To better care for and protect the Earth, when the user no longer needs this product or its service life ends, please comply with national laws and regulations on the recycling and disposal of waste electrical and electronic products, and hand it over to local manufacturers with national recognized recycling qualifications for processing.