Instruction Manual for caple models including: ZI922, Island Hood, ZI922 Island Hood, Hood
Jan 31, 2018 — INTRODUCTION. Thank you for choosing this Caple extractor hood. To ensure that you get the best results from your new extractor, we strongly suggest that ...
Island Hood Stainless Steel | Caple
File Info : application/pdf, 20 Pages, 630.89KB
DocumentDocumentIsland Hood Instruction Manual
ZI922
Contact Caple on 0117 938 7420 for spare parts or www.caple.co.uk
CONTENTS
Introduction
3
Safety Instructions
4
Environmental Protection
9
Installation
10
Installing the Charcoal Filter
14
Operation
15
Care and Maintenance
16
Troubleshooting
18
Product Dimensions
19
Caple Contact Details
20
2 Instruction manual Zi922 Please keep this instruction manual for future reference
INTRODUCTION
Thank you for choosing this Caple extractor hood.
To ensure that you get the best results from your new extractor, we strongly suggest that you read this instruction manual thoroughly before use. If treated with care, your Caple extractor should give you years of trouble-free use.
To register ownership, please ensure you complete and return the guarantee card supplied with the appliance or visit www.caple.co.uk and register here.
This instruction manual is designed to provide you with all the required information related to the installation, use and maintenance of the appliance.
This hood is designed to extract unpleasant odours from the kitchen; it is not intended to extract steam. In order to operate the unit correctly and safely, please read this instruction manual carefully before installation and use.
The cooker hood uses high quality materials and is made with a streamlined design. Equipped with an electric motor and centrifugal fan, it provides strong extraction with low noise. It also features non-stick grease filters and an easy installation.
Please keep this instruction manual for future reference Instruction manual Zi922 3
I M P O R TA N T
This appliance must only be used for the purpose it is intended. Other types of use are not permitted and may prove dangerous. Caple will not be held liable for any damage caused by the incorrect use of the appliance. Do not use any accessories or attachments not recommended by Caple as this may result in fire, electric shock or injury. To protect against fire, electrical shock and injury to persons, do not immerse cords or plugs in water or any other liquid. Never touch the appliance with wet or damp hands. Never pull the power cable as you could damage it. If the appliance is faulty, do not attempt to repair it. Isolate it from the mains electric supply and contact Caple Service either by phone 0117 938 7420 or email service@caple.co.uk Keep all packaging (including plastic bags, polystyrene foam etc) out of the reach and away from children. Do not rest large or unstable objects on any part of the appliance.
4 Instruction manual Zi922 Please keep this instruction manual for future reference
I M P O R TA N T
Caple cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that Caple reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance. Under no circumstances should any external covers be removed for servicing or maintenance except by suitably qualified personnel.
SAFETY INSTRUCTIONS
- Never let children operate the machine.
- The cooker hood is for home use only, not suitable for barbecuing, restaurants or other commercial purposes.
- The cooker hood and its filter should be cleaned regularly in order to keep in good working condition.
- Clean the cooker hood according to the instruction manual to reduce the risk of fire.
- When using a gas hob, do not leave naked flames under the extractor.
- Before connecting this appliance check that the power supply cord is not damaged.
- If the room where the hood is to be used contains a fuel burning appliance such as a central heating boiler then its flue must be of the sealed or balanced flue type. If other types of flue or appliances are fitted ensure that there is an adequate supply of air to the room.
Please keep this instruction manual for future reference Instruction manual Zi922 5
- The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels.
- Regulations concerning the discharge of air have to be conformed to.
- Do not flambé under the cooker hood.
- Never leave frying pans unattended during use as overheated fats and oils may catch fire.
- To ensure the best performance, we recommend switching on the extractor 15 minutes before cooking and leave it running 15 minutes after. This will ensure that the air in the kitchen is being circulated before cooking commences and the air is being cleaned after cooking has finished.
- The performance of your extractor will vary depending on a number of factors. These include type of extraction, room volume, length of ducting, ventilation available and the cleanliness of the filters.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
6 Instruction manual Zi922 Please keep this instruction manual for future reference
- Cleaning and user maintenance must not be made by children without supervision.
- Never immerse the appliance in water. - To avoid all risk, if the power cable is damaged, it must
only be replaced by a Caple appointed engineer.
- Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children must not play with this appliance. - When not in use and before cleaning, always isolate the
appliance from the electrical supply.
WARNING:
Only plug this unit into a properly earthed outlet. If in doubt seek advice from a suitably qualified engineer.
- Failure to follow these instructions can result in death, fire, or electrical shock.
- This appliance must be connected to the mains by a competent person. We recommend that the appliance is connected by a qualified electrician who is a member of the N.I.C.E.I.C who will comply with the I.E.E and local regulations. Electrical information can be found on the rating plate.
Please keep this instruction manual for future reference Instruction manual Zi922 7
APPROPRIATE USE: - This appliance is intended to be used in household and
similar applications such as: > Staff kitchen areas in shops, offices and other working environments. > Farm Houses. > By clients in hotels, motels and other residential type environments. > Bed and breakfast type environments.
8 Instruction manual Zi922 Please keep this instruction manual for future reference
ENVIRONMENTAL PROTECTION Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. This appliance is marked according to the European directive on Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this product, please contact your local council, your household waste disposal service or the retailer where you purchased the product.
WARRANTY Your new appliance is covered by warranty. The warranty card is enclosed - if it is missing, you must provide the following information to your retailer in order to receive a replacement: date of purchase, model and serial number. Registration can also be completed online by visiting www.caple.co.uk.
Ensure you keep your warranty card safe, you may need to show it to Caple Service together with proof of purchase. If you fail to show your warranty card you will incur all repair charges.
Spare parts are only available from Caple Service and spare parts authorised centres.
CE DECLARATIONS OF CONFORMITY This appliance has been manufactured to the strictest standards and complies with all applicable legislation, Low Voltage Directive (LVD) and Electromagnetic Compatibility (EMC).
UKCA DECLARATIONS OF CONFORMITY This appliance has been manufactured to the strictest standards and complies with all applicable legislation.
TECHNICAL FICHE This appliance conforms to all current and applicable energy regulations. To view the Technical Fiche that supports the energy labelling data, please visit the product page on our website www.caple.co.uk.
Please keep this instruction manual for future reference Instruction manual Zi922 9
INSTALLATION
PREPARE FOR THE INSTALLATION: If you have an outlet to the outside, your cooker hood can be connected as per the below picture by means of an extraction duct with an interior diameterof150mm.
Beforeinstallation, turn the unit off and unplug it from
Earthed Outlet Box
the outlet.
Earthed Plug
EarthedOutlet
Thecookerhoodshould be placed at a minimum distance of 65-76cm a bovethehob.Itisthe manufacturer of the hob who determines the clearance requireda nd the clearance quoted by the hob manufacturer mustbefollowed.Inthe absence of any instructions supplied with a gas
hob the minimum distance between the hob and the hood must be
at least 760mm.
4
4
4
4
10 Instruction manual Zi922 Please keep this instruction manual for future reference
IOthNbesSeroTrvoAemLt.hLeAwTaIrOninNg conDceUrnCinTgEtDhe operation of the appliance when air is discharged from WARNING:.....
.
1. Position the hanging plate on the ceiling and then mark the position of the screw holes. The
hanging plate should be securely fixed to the ceiling.
11 x ST6 (40mm) screws for wooden ceiling.
8 x expansion bolts for cement ceiling.
2. Fix the angle bars to the hanging plate, using the 8 x M5 screws. 3.Extendtheanglebarstotherequiredheightandth en fix them in position using the 16 x M5 screwsandnutswithmetalwashers.
IMPORTANT:
The angle bars must have an overlap of at least 100mm.
5
5
5
4) If your cooker hood is going to be externally ventilated, then
connect the ducting hose to the ceiling adaptor at this point.
4) IfFiyxothuer cuopopekrecrhhimoondeyisegcotiionngtotothbeeheaxntgeirnngaplllyatvee,nutsiilnagtetdh,et4h
5
4c)oInfsncyeroecuwtrstc.hoeodkuercthinogodhoissgeotiongthteo cbeeilienxgteardnaapllytovreanttitlahties dp,otihnet.n
cFoixnntheectutphpeedr ucchtiimngnehyosseecttoiotnhetocethilienghaandgaipntgorpalattteh,isuspionigntt.he
5 5
Fsscicxrreetwhwess..upper chimney section to the hanging plate, using the
4. If your cooker hood is going to be externally ventilated,
then you should connect the ducting hose to the ceiling
adaptor at this point. Fix the upper chimney section to the
hanging plate, using the 4 x self tapping screws.
Slide the lower chimney section onto the angle bars and raise it until it sits just below the upper chimney section.
Please keep this instruction manual for futurereferenceInstructionmanual Zi922 11
5. Lift the main body of the cooker hood onto the angle bars and then fix it into position using the 16 x M5 screws.
IMPORTANT: This stage of the installation process MUST be completed by two people. The 16 x M5 screws MUST be securely tightened.
12 Instruction manual Zi922 Please keep this instruction manual for future reference
6. If you are using the hood in ducted / ventilation mode, you should fix the ducting hose to the ceiling.
> The electrical connection must correspond to the electrical requirement noted on the rating plate, which is placed inside the cooker hood. The appliance should now be connected to the electrical supply.
> Check that the appliance is operating correctly by selecting each speed and switching the light bulbs on and off.
> Remove the hanging hook and then slide the lower chimney section downwards, until it rests against the main body of the cooker hood.
> Use a stainless steel cleaner and polish on the stainless steel sections of the appliance.
> If you are using the appliance in recirculation mode, then you should now fit the charcoal filter. See the "installing the charcoal filter" section on page 14.
> Fix the one-way-valve to the air outlet of the cooker hood. Then, attach the exhaust pipe onto the one-way-valve as shown below.
Exhaust Pipe
Cooker Hood
Please keep this instruction manual for future reference Instruction manual Zi922 13
mustbeRIfiEnyosCutIadRloleCndUo.tLhAaTveIOanNouMtleOtDtoEtheoutside,the,exahnadust pipe is not required (as shown in the section "Installation - ducted"), and charcoal filters must be installed.
(CAP61CF) (CAP61CF)
IAgNrneaSascTetAivfiaLltteLerdIsNchhoGaurlcTdoHableEfidlteCetraHccAhaenRdbCfieOrustAs.ePLdretFossItLtrahTpeEroRedleo(auCsrseA.bIPnu6totor1dnCearFnto)dipnustllailtltdhoewcnhwaarcrodaalsfilter,the
shown below.
Floitckthientaoctpilvaactee.dRcehpaeractotahlefilstaemroenotontthheesoitdheerofsitdhee.motorandturnitinaclockwisedirectionto
NOTE: Make sure the filter is securely locked. Otherwise, it may loosen and be dangerous. When using a charcoal filter, the extraction power may be slightly reduced. We recommend replacing these filters every 6 months. Replacement filters (CAP61CF)
1cfr4aonmInbswetrwpuucwtri.cochanapsmleead8.cnodu.iaurelkcZtil9y22Pleasekeepthisinstructionmanualforfuturereference
OPERATION
ON/OFF BUTTON Press and hold for 2-3 seconds to turn the extractor fan on. You can then change the speeds as per below. Press again to switch off. LOW SPEED BUTTON Is suitable for simmering and cooking which does not produce much steam or odour. MEDIUM SPEED BUTTON Airflow speed is ideal for extracting with standard cooking. HIGH SPEED BUTTON When a high amount of steam or odours are produced, use the high speed setting for the most effective extraction. LIGHT BUTTON Switches the light on and off.
Please keep this instruction manual for future reference Instruction manual Zi922 15
CARE AND MAINTENANCE
IMPORTANT: Before cleaning or maintenance please switch off the electricity supply and remove the plug from the wall. REGULAR CLEANING Use a soft damp cloth with lukewarm mildly soapy water or household cleaning detergent. Never use metal pads, chemicals, abrasive material, abrasive cleaning creams or stiff brushes to clean the appliance. CLEANING THE GREASE FILTER Clean the filter every month to help minimise the risk of fire. The filter collects grease, smoke and dust, therefore the filter is directly affecting the efficiency of the cooker hood. If not cleaned, the grease residue (which is potentially flammable) will saturate the filter. It can be easily cleaned with warm water and washing up liquid, alternatively the filters can be cleaned in your dishwasher. Please ensure no other items are washed with the filters, they must be washed separately to prevent food becoming trapped in the gauze. Cleaning the grease filters in the dishwasher may lead to discolouration, this is normal and is a not a fault with the product. REPLACING YOUR CHARCOAL FILTER This only applies if you are using the hood in recirculation mode (not vented to the outside). The charcoal filter traps your cooking odours and they need to be replaced, this can vary depending on how frequently the cooker hood is used. We recommend replacing them at least every 6 months. This extractor uses CAP61CF charcoal filters. Filters can be purchased directly from www.caple.co.uk.
16 Instruction manual Zi922 Please keep this instruction manual for future reference
REPLACING THE LED PANEL 1. Switch the unit off and unplug the appliance. 2. Unplug the LED lamp cable. 3. Unscrew the screws and nuts on the 2 brackets. 4. Replace the LED panel and screw back
on to the brackets. 5. Plug the LED lamp cable back in. NOTE: The LED light panel is for illumination of the cooking area only, and not illuminating the room.
Please keep this instruction manual for future reference Instruction manual Zi922 17
TROUBLESHOOTING
FAU LT
The lights on, but the fan does not work
CAUSE The fan blade is jammed
The motor is damaged
SOLUTION
Switch off the unit and contact Caple Service. To be repaired by qualified service personnel only.
The lights and fan do not work
A blown fuse The power cord is loose
The fan blade is damaged
Serious vibration of the unit The fan motor is not fixed tightly
The extraction performance is not good
The unit is not hung correctly on the bracket
The filter requires cleaning
Replace the fuse.
Plug in to the power supply again.
Switch off the unit and contact Caple Service. To be repaired by qualified service personnel only.
Switch off the unit and contact Caple Service. To be repaired by qualified service personnel only.
Take down the unit and check whether the bracket is in the correct location.
Clean the grease filter as directed in the `Care and maintenance' section. Replace the charcoal filter (if in recirculation mode).
If the above table has not solved the problem please contact Caple Service by phone on 0117 938 7420 or by email service@caple.co.uk
18 Instruction manual Zi922 Please keep this instruction manual for future reference
PRODUCT DIMENSIONS
ZI922
327.5mm
297.5mm
648-1098mm
60mm
600mm
900mm
Please keep this instruction manual for future reference Instruction manual Zi922 19
Caple Service Fourth Way Avonmouth
Bristol BS11 8DW
T: 0117 938 1900 E: service@caple.co.uk www.caple.co.uk
Adobe PDF Library 15.0 Adobe InDesign 16.2 (Macintosh)