User Manual for Westinghouse models including: WFB2804AB, WFB2804WB, 238L Single Door Freezer, Single Door Freezer, 238L Freezer, Freezer
User Manual for WFB2804WB
WFB2804AB WFB2804WB
50~75 mm
100
100 100
The side in which the door opens can be changed from the left side (as supplied) to the right side, if the installation site allows for it. Tools you will need:
3.Lift the door and place it on a padded surface to prevent scratching.
Note: Before you start lay the freezer on it's back in order to gain access to the base, you should rest it on soft foam packaging or similar material to avoid
damaging the backboard of the freezer. To reverse the door. The following steps are generally recommended. 1Stand the freezer upright. Remove the screw hole cover and upper hinge coverleftas follow diagram.
4. Loose screw remove part and part then install them to the right side and tighten securely.
2. Remove the three screws as follow diagram. Lift the left upper hinge part.
Door stopper Limit block Self-tapping screw
5. Place freezer flatwiseremove part and part . Loose screw and then remove part .
7. Set the door into its new place making sure the pin enters the bushing at the lower frame section.
Screw cover Adjustable bottom feet part Right lower hinge part Special flange self-tapping
screw
6. Just remount to the step 6, change part and part to left and part to right and then fix part with screws.
8. Replace the lid by fitting the upper hinge core into the upper door's hole, securing it with the 3 screws.
9. Put the screw hole cover and upper hinge coverright as follow diagram.
Note: 1. You need move hinge axis from hole to , move adjustable bottom feet part from hole to before transfer.
10. Switch the handles from the right to the leftonly for the model with handles.
Handle cover Screw Handle part Cover-screw cap
Note Due to unceasing modification of our products, handle may be slightly different from this instruction manual, but its functions and using methods remain the same. Switch the handles from the right to the left as follow diagram.
Screw cover Screw Handle part Cover-screw cap
Warning When changing the side at which the door opens, the appliance must not be connected to the mains. Remove plug from the mains beforehand.
To activate the Quick Freeze function, press the Quick Freeze button until the icon light is lit. The temperature is then set to -24°C (11°F)
Quick Freeze mode automatically exits after about 52 hours.
To deactivate the Quick Freeze mode, press button until the light goes off and the refrigerator temperature setting will revert to the previous setting.
4. Eco Mode
If you are going to be away for a long period of time, you can turn it to Eco mode to maintain a cooling temperature but save on electricity.
Ensure the freezer is unlocked by checking that there is no light on ECO (Lock Hold). If the light is on, press and hold for 3 seconds.
To activate Eco Mode, press the button until the light is lit. The temperature is set to -17°C (1°F).
To deactivate Eco Mode, press the button until the light goes off. The freezer temperature setting will revert to the previous setting.
5. Child Lock
You can lock the controls of the refrigerator.
The Child Lock is automatically turned on.
To deactivate the child lock, press and hold the button for 3 seconds until the light goes off. Now you can change the other functions of the freezer.
If no button has been pressed for 20 seconds, the light will be on.
6. Alarm
If the door has been left open for over 2 minutes, then the door alarm will sound & the control panel will show "dr". The icon will flash and there will be buzzing sound.
If the door is not closed, the buzzer will sound 3 times every 1 min.
After the door alarm time exceeds more than 10 minutes, the buzzer stops beeping, the icon is off, and the display screen shows normal.
The door alarm can also be cleared by closing the door.
To save energy, please avoid keeping the door open for a long time when using the appliance.
ELECTRONIC CONTROLS
FEATURES OF THE FREEZER
Your appliance has the accessories as shown in the "Description of the appliance". We recommend that you read through the below carefully before using the appliance to prevent damage to the product
1. Shelves in the Freezer Cabinet
The glass shelves in the refrigerator can be taken out to adjust their position and to be cleaned. To remove, tilt the front of the shelf upwards and gently slide out.
To replace, hold the shelf straight with the fridge cavity, angling the shelf downward. Slide the shelf in on the shelf runner, and gently drop into place.
2. Freezer Drawer
The Freezer drawers are used store food which needs to be frozen, including meat, fish, ice cream, etc.
To remove, tilt the front of the drawer upwards and gently slide out. To replace, hold the drawer straight with the fridge cavity, angling the drawer downward. Slide the drawer in on the shelf runner, and gently drop into place.
FEATURES OF THE FREEZER
4264615-C
Adobe Illustrator CS6 (Windows) 3-Heights(TM) PDF Optimization Shell 5.9.1.5 (http://www -tools.com)