Manuals+

Morley AFX-1 Analog Multi-FX Owners Manual

Proudly American Made

Model AFX-1

Authentic All Analog Multi FX with Switchless Classic Wah, Vintage Dual Distortion with Hi Gain, Stereo Chorus and Echo. No Programming or Complicated Menus. Plug In and Play!

Introduction

Thank you for purchasing this Morley® All Analog Multi-FX. We hope you enjoy playing it as much as we enjoyed making it.

Power Requirements

Your Morley® AFX-1 is designed to be powered by a Truetone One Spot power supply; 9V 1700mA Center Polarity Negative. The adapter is included with the AFX-1. Use of any other brand adapter is not recommended. The AFX-1 does NOT have a battery option.

Features

  • Optical & Switchless Wah
  • Classic Wah Tones
  • Analog Hi-Gain Distortion
  • Pre/Post Gain
  • High, Mid, Low Tone Controls
  • Standard or Hi-Gain Mode with Boost
  • Smooth Analog Chorus
  • Rate and Depth Controls
  • Mono or Stereo Mode
  • Analog Echo Slapback to Hall
  • Echo, Repeat and Mix Controls

Other Cool Features

  • Custom Buffer Circuit
  • Mono & Stereo Outputs
  • FX Loop
  • Glow-in-the-Dark Treadle Grip on Wah
  • Unique LED Indicators for Each Mode
  • Power Adapter Included
  • Proudly American Made
  • Cold Rolled Steel Housing
  • Custom Hand-Crafted Finish
  • Dimensions: 12.5" Length x 8" Width x 2.75" Height
  • Weight: 5 lbs

Control Explanations

Classic Wah

  1. SWITCHLESS WAH: Step on to engage Wah and step off to go to bypass.
  2. OPTICAL WAH: Utilizes optical technology, eliminating scratchy or replaceable pots.
  3. CLASSIC WAH TONES: Provides traditional Wah tones.
  4. LED INDICATION: Red LED lights when in Wah mode.

Diamond Distortion

  1. DISTORTION SWITCH: Turns the Distortion Effect on/off.
  2. LED INDICATION: Blue LED lights when in Distortion mode.
  3. PRE KNOB: Controls the Input Gain, determining the amount of distortion.
  4. POST KNOB: Controls the Output Gain, acting as the Distortion Level.
  5. LOW EQ: Controls the lower frequencies of the Distortion.
  6. MID EQ: Controls the middle frequencies of the Distortion.
  7. HIGH EQ: Controls the higher frequencies of the Distortion.
  8. HI GAIN SWITCH: Turns Hi Gain Distortion Mode on/off.
  9. LED INDICATION: Green LED lights when in Hi Gain mode.
  10. HI GAIN KNOB: Controls the amount of Saturation in Hi Gain Mode.

Crystal Chorus

  1. CHORUS SWITCH: Turns the Chorus Effect on/off.
  2. LED INDICATION: Orange LED lights when in Chorus mode. The Orange LED also blinks in time with the Chorus Rate.
  3. RATE KNOB: Controls the speed of the Chorus.
  4. DEPTH KNOB: Controls the amount of pitch-shifting and delay in the Chorus.
  5. Note: The full Chorus signal is sent to both Left/Mono and Right/Stereo Jacks.

Emerald Echo

  1. ECHO SWITCH: Turns the Echo Effect on/off.
  2. LED INDICATION: Yellow LED lights when in Echo mode.
  3. ECHO KNOB: Controls the Echo Time from Slapback to Hall.
  4. REPEAT KNOB: Controls the amount of repeats.
  5. MIX KNOB: Controls the mix of the original "dry" signal and the echoed "wet" signal.
  6. Note: The full Echo Signal is sent to the Left/Mono jacks. When using Echo in Stereo Mode, Echo will be present on the Left/Mono Jack ("wet") but the Right/Stereo Jack will be without Echo ("dry"). This creates a wide sonic spectrum that makes the sound seem Larger Than Life!

Other Features

  1. PREMIUM BUFFER: Ensures no signal loss or tone change even when using long cables. The buffer is always engaged.
  2. MONO / STEREO OUTPUTS: Use in Mono by using the Left Output Jack or use in Stereo using both Left and Right Jacks.
  3. FX LOOP: Allows placement of other effects between the Distortion and the Chorus.
  4. TREADLE GLOW: Patented Glow-in-the-Dark Treadle Grip allows you to always locate your pedal, even on a dark stage.
  5. MADE IN THE USA: Designed and Built in Carpentersville, Illinois.
  6. STEEL HOUSING: Built like a tank.
  7. CUSTOM HAND-CRAFTED FINISH: Each pattern was created by hand one by one for a unique and awesome looking design.

Warranty Information

I. WARRANTY

A. Your Morley® AFX-1 is warranted to be free of any defects in materials and workmanship if used under normal operating conditions for one year from date of purchase, subject to the limitations described below. This warranty is not transferable under any circumstance.

B. PLEASE NOTE: In order to validate your warranty, save your dated purchase receipt. You will need it to get service.

C. If the AFX-1 Malfunctions in the first 12 months as a result of faulty materials or workmanship, Morley® will repair the defect(s) or replace the pedal, at its sole discretion. If original materials are no longer available, Morley® reserves the right to use materials regularly utilized at the time of repair. If replacement of customer's pedal is deemed necessary by our Service Department, Morley® will replace the pedal with one of the same.

D. This warranty covers the cost of both labor and materials on any repair deemed necessary by our Service Department for the one year. Only Morley® Service Department may perform warranty service and any service performed by unauthorized persons will void this warranty. Morley® shall not be held liable for any and all defects or damage caused by services performed by unauthorized persons.

II. LIMITATIONS AND EXCLUSIONS

The following items are not covered by this warranty:

  • A. Any pedal whose serial number is missing or has been altered or tampered with in any manner.
  • B. Any pedal that has been modified from original design.
  • C. Any pedal whose purchase receipt has been falsified or altered.
  • D. Any pedal upon which any unauthorized repair or service has been performed.
  • E. Normal wear and tear on cosmetic aspects of pedal: powder coating, screen printing, treadle rubber, knobs and/or packaging.
  • F. Subjective issues such as tonal characteristics.
  • G. Damage caused by negligence or improper use.
  • H. Damage caused by accidents deemed Acts of God: fires, floods, etc.
  • I. Shipping damages of any kind.
  • J. Freight charges to Morley® service center.
  • K. Any and all charges if no problem is found at time of repair/inspection.
  • L. Any and all charges incurred from priority service requests (Rush Service) or priority shipping for replacement parts or return of customer's merchandise.

III. HOW TO OBTAIN WARRANTY SERVICE

A. If you experience any malfunction that is covered under Morley® Warranty, please contact Morley® Service Department at service@morleyproducts.com.

IV. RETURNING YOUR PEDAL FOR WARRANTY SERVICE

A. Owner is responsible for all freight & insurance costs to ship the pedal to Morley® Service Department. Owner must contact Morley to receive an RA # (Return/Repair Authorization Number) to return any Morley pedal. RA # must be clearly marked on the outside of the package being returned to Morley®. No pedal may be returned to Morley® and delivery will not be accepted without such prior authorization.

B. After the returned pedal is inspected upon its arrival, Morley Service Department will advise the Owner of the approximate date of completion. The repaired pedal will be returned to the Owner freight prepaid.

V. WARRANTY SERVICE

A. Only Morley Service Department may perform warranty service and any service performed by anyone other than Morley will void this warranty. Morley shall not be liable for any and all defects or damage caused by services performed by unauthorized persons.

B. PLEASE NOTE: Morley does not offer repair service of any kind other than warranty repair service. If your pedal needs any service or maintenance that is not covered under warranty, you should contact the Morley Dealer where the pedal was purchased. For a list of authorized Morley Dealers and Distributors, please visit our website at www.morleyproducts.com.

VI. LIABILITY

A. The warranties and remedies set forth in this section are exclusive and are in lieu of all other warranties whether statutory, express, or implied (including all warranties of MERCHANTABILITY and FITNESS FOR A PARTICULAR PURPOSE and all warranties arising from course of dealing of usage or trade) and whether the claims of customer are based in contract, tort (including NEGLIGENCE or STRICT LIABILITY), or under any warranty, or otherwise, nor shall M-Wave be liable to customer for any special, indirect, incidental, or consequential loss or damage whatsoever, or for loss of or damage to the customer's facilities, loss of use of equipment, loss of profits or revenues or the loss or use thereof, or claims of customer. In no event shall the total liability of Morley, whether in contract, in tort (including NEGLIGENCE and STRICT LIABILITY), under warranty, or otherwise, exceed, and customer waives and will require its insurers to waive all rights of recovery against Morley for any liabilities in excess of, the price paid to Morley under the agreement.

VII. FOR MORE INFORMATION

A. Write: Morley Service Department 256A S Washington Street Carpentersville, IL 60110

B. Email: service@morleyproducts.com

C. Online: www.morleyproducts.com

Models: AFX-1 Analog Multi-Effects Pedal, AFX-1, Analog Multi-Effects Pedal, Multi-Effects Pedal, Pedal

File Info : application/pdf, 2 Pages, 1.36MB

1000201

References

Microsoft: Print To PDF

Related Documents

Preview Morley Pedals User Manual: Power Wah, Wah Volume, and Distortion Wah Features and Specifications
User guide for Morley Power Wah (PWO), Power Wah Volume (PWOV), and Pro Series II Distortion Wah Volume (PDW-II) guitar effects pedals. Details features, connections, power, battery, and technical specifications.
Preview Morley M2 Wah Volume (M2WV) User Guide and Specifications
User guide and specifications for the Morley M2 Wah Volume (M2WV) guitar effects pedal, detailing its features, connections, power options, and warranty information.
Preview Morley M2 PFW Cliff Burton Power Fuzz Wah User Guide and Specifications
Detailed information on the Morley M2 PFW Cliff Burton Power Fuzz Wah guitar effects pedal, including features, specifications, connections, and usage instructions.