User Manual for Jiang Su Yisin Tech models including: AAD06, 2A8MI-AAD06, 2A8MIAAD06, LHCD ONE Bluetooth Playback Device, Bluetooth Playback Device, Playback Device, Device

2023.09.19-LHDX-ONE User Manual

User Manual

Jiang Su Yisin Tech Co., Ltd AAD06 2A8MI-AAD06 2A8MIAAD06 aad06

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 928.42KB

Document Document

User Manual
FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/ TV technician for help.

LHDC ONE User Manual
Step 1: Put Your Bluetooth Audio Playback Device in Pairing Mode. Step 2: Plug the LHDC ONE into a USB-C port on your PC or phone. For first-time use, LHDC ONE will automatically enter pairing mode, indicated by the LED flashing in BLUE/RED. Step 3: Wait for your device to connect to LHDC ONE. If connected, the LED closer to the button will turn BLUE. Proceed to Step 5. If not connected, the LED will be RED. Ensure your Bluetooth audio device is in pairing mode, then proceed to Step 4. Step 4: Double-click the button to put LHDC ONE into pairing mode, with the LED flashing in BLUE/RED. If connected, the LED closer to the button will turn BLUE. Proceed to Step 5. If not connected, the LED will be RED. Ensure your Bluetooth audio device is in pairing mode, then repeat Step 4. Step 5: After your Bluetooth audio device is connected, you can enjoy audio through your Bluetooth playback device. Regardless of Bluetooth connection status, you can always enjoy audio from the 3.5mm analog audio jack.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

LHDC ONE User Manual
Paso 1: Ponga su dispositivo de reproducción de audio Bluetooth en modo de emparejamiento. Paso 2: Conecte el LHDC ONE al puerto USB-C de su PC o teléfono. Para el primer uso, el LHDC ONE entrará automáticamente en modo de emparejamiento, indicado por el LED parpadeando en AZUL/ROJO. Paso 3: Espere a que su dispositivo se conecte al LHDC ONE.
Si está conectado, el LED más cercano al botón se volverá AZUL. Continúe con el Paso 5.
Si no está conectado, el LED estará en ROJO. Asegúrese de que su dispositivo de audio Bluetooth esté en modo de emparejamiento y luego siga al Paso 4. Paso 4: Haga doble clic en el botón para poner el LHDC ONE en modo de emparejamiento con el LED parpadeando en AZUL/ROJO.
Si está conectado, el LED más cercano al botón se volverá AZUL. Continúe con el Paso 5.
Si no está conectado, el LED estará en ROJO. Asegúrese de que su dispositivo de audio Bluetooth esté en modo de emparejamiento y repita el Paso 4. Paso 5: Después de que su dispositivo de audio Bluetooth esté conectado, puede disfrutar del audio a través de su dispositivo de reproducción Bluetooth. Independientemente de la conexión Bluetooth, siempre puede disfrutar del audio desde la toma de audio analógica de 3.5 mm.