R. STAHL 6036B LED Tube Light - Explosion-Protected
Article No.: 317340
Model: 6036/31301-44500-111100-850-0000ST00
Product Overview
The R. STAHL Series 6036 is a compact and robust LED tubular light fitting designed for general lighting applications and use as a machine luminaire, even in confined spaces. It offers a long service life of up to 100,000 hours due to its energy-efficient LED technology and in-house developed electronics. The light fitting is built to withstand extreme ambient temperatures ranging from -55 °C to +70 °C.
- Extremely compact and robust design for general lighting applications.
- Vibration-proof, sturdy, and low-maintenance.
- Optional DALI interface or address module for central battery systems.
- IP66/IP67 and IP68 degree of protection.
- Suitable for operation in extreme ambient temperatures from -55 °C to +70 °C.
Technical Data
Explosion Protection
| Application range (zones) | 1, 2, 21, 22 |
| IECEX gas certificate | IECEx EPS 13.0027 |
| IECEx gas explosion protection | Ex db op is IIC T4 Gb |
| IECEx dust certificate | IECEx EPS 13.0027 |
| IECEx dust explosion protection | Ex tb IIIC T100 °C Db |
| ATEX gas certificate | EPS 13 ATEX 1 597 |
| ATEX gas explosion protection | II 2 G Ex db op is IIC T4 Gb |
| ATEX dust certificate | EPS 13 ATEX 1 597 |
| ATEX dust explosion protection | II 2 D Ex tb IIIC T100 °C Db |
| Certificates and approvals | ATEX, IECEx |
| Ship approval | ATEX (BVIS), IECEx (BVIS), DNV |
| Declaration of conformity | ATEX (EUK) |
Electrical Data
| Rated operational voltage AC | 100 ... 277 V |
| Rated operational voltage DC | 190 ... 250 V |
| Power factor | ≥ 0.90 |
| Frequency range | 50-60 Hz |
| Control interface | without |
Auxiliary Power
| Nominal current | 170 mA |
Lighting Data
| Luminous flux | 4620 lm |
| Colour rendering | ≥ 80 CRI80 |
| Colour temperature | 5000 K |
| Note | Values apply to T₂ = +25 °C |
| Light distribution | 140° with diffusing glass |
| Luminaire efficacy | 128 lm/W |
Ambient Conditions
| Ambient temperature | -55 °C ... 70 °C (switch on above -40 °C) |
| Storage temperature | -40 °C ... 70 °C |
Mechanical Data
| IP degree of protection (IEC 60598) | IP66 / IP68 (10 m / 60 min) |
| Class | II |
| Enclosure material | Polycarbonate |
| Pipe material | Polycarbonate |
| Type of connection cable | H07RN8-F 2x1.5 mm² |
| Cable length | 10 m |
| Size | 3 |
| Length | 1150 mm |
| Diameter | 55.9 mm |
| Impact strength (IEC 62262) | IK11 |
| Weight | 3.24 kg (7.14 lb) |
Components
| Cable glands and entries | CMP-20-A2F (M20x1.5) |
| Wire guard | No |
Technical Drawings
Luminous flux decline relative to ambient temperature:
The graph shows the luminous flux decline in percentage relative to ambient temperature. For DC operation, the luminous flux declines to 50% at a specific temperature.
Graph Description: The graph plots 'Output current [%]' on the y-axis against 'Temperature [°C]' on the x-axis. It shows two lines indicating luminous flux decline:
- Line 1: 'All white tones, size 1 to 4'
- Line 2: 'All colours, size 1 to 4'
The graph illustrates that as the temperature increases, the luminous flux output decreases. For example, at 70°C, the luminous flux is significantly reduced compared to lower temperatures.
Dimensional Drawings:
The diagram shows the overall dimensions of the light fitting. The main body length is 1150 mm (45.24 inches) with a tolerance of ±2.50 mm. The diameter is 55.90 mm (2.20 inches). The total length including connection cable and end caps is approximately 1010 mm (39.76 inches).
Accessories
Plug
| Description | Art. No. |
| 8570/12-306-S-XX-X-XX-XXX 3-pole plug, 200 to 250 V AC, 50 / 60 Hz, 16 A | 272898 |
Mounting Brackets
| Description | Art. No. |
| Mounting bracket made of galvanised sheet steel to screw onto thread M8 or M10 (2 pieces) | 227256 |
| Mounting bracket made of stainless steel V4A to screw onto thread M8 or M10 (2 pieces) | 227257 |
| Double plastic mounting clamp for mounting on pipes with a diameter of 45 to 55 mm (screws and nuts made from stainless steel V2A) (2 pieces) | 254932 |
| Mounting bracket made from galvanised sheet steel (x 2 units); for design size 1 | 120535 |
| Mounting bracket made of stainless steel V4A for fastening on surfaces (2 pieces) | 323163 |
| Mounting plate made of stainless steel V4A for terminal box Ex e Series 8010 (for example Art. No. 130724) for fastening on mounting bracket Art. No. 252940 | 254494 |
| Mounting bracket made from galvanised sheet steel with magnetic base (x 2 units); for design size 1 | 120536 |
