Warranty and Registration | ROPEFLEX - Strength & Conditioning Equipment
Instruction Manual for ROPEFLEX models including: RX8100 12 Spartan Competition Infinity Rig, RX8100, 12 Spartan Competition Infinity Rig, Spartan Competition Infinity Rig, Competition Infinity Rig, Infinity Rig
Ropeflex RX8100-12 Spartan Competition Infinity Rig — Active Fitness Depot
File Info : application/pdf, 10 Pages, 748.77KB
DocumentDocumentPLEASE REGISTER YOUR NEW PRODUCT To register your product online please go to: www.ropeflex.com/warranty-and-registration Product serial number is located on equipment or is shown in the box below SERIAL NUMBER If serial number is not sown please check equipment ROPERIG | RX8100 Product Manual DOC: 32-8100 Configuration subject to change RX8100 ASSEMBLY INSTRUCTIONS & MANUAL WARNING DECAL PLACEMENT The decals shown here have been placed on the equipment. If any of the decals are missing or illegible, call us toll-free at 650.549.5888, Monday through Friday, 9 a.m. until 5 p.m. Pacific Time, to order replacement decals. Apply replacement decals where they have been placed originally. 32-8100 REV.A 1 RX8100 ASSEMBLY INSTRUCTIONS & MANUAL IMPORTANT PRECAUTIONS 32-8100 REV.A WARNING: To reduce the risk of serious injury, read the following important precautions before using this equipment. 1. Read all instructions in this manual and 6. Make sure the adjustment knobs are fully assemble as described before using this engaged / disengaged before using the equipment. equipment. 2. It is the responsibility of the owner to ensure 7. Always wear athletic shoes for foot that all users of this equipment are are protection while exercising. adequately informed of all precautions. 8. This equipment is designed to support a 3. Use this equipment only on a level surface. maximum user weight of 300 pounds. Cover the floor beneath to protect the 9. Pull on one the rope only and never grab a surface. rope in a way that prevents the drum from 4. Keep children under 12 and pets away from rotating. Never attempt to hang on the rope the equipment at all times. or frame. Pull rope with hands only. 5. Make sure all parts are properly tightened 10. If you feel pain or dizziness at any time each time you use this machine. Replace while exercising, stop immediately and any worn parts immediately. begin cooling down. WARNING: Before beginning this or any exercise program, consult your physician. This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ROPEFLEX assumes no responsibility for personal injury or property damage sustained by or through the use of this product. 2 RX8100 ASSEMBLY INSTRUCTIONS & MANUAL 32-8100 REV.A MAIN FRAME ASSEMBLY | 12 RX2100 CONFIGURATION 5 4 4 2 3 1 MAIN COMPONENTS ITEM 1 2 3 4 5 QUANTITY 4 4 12 2 12 DESCRIPTION Vertical RIG Beam Horizontal RIG Beam LCD Display Extension Clamping Plate (For the RX2100) Logo Display RX2100 Rope Trainer 3 RX8100 ASSEMBLY INSTRUCTIONS & MANUAL 32-8100 REV.A RECOMMENDED TOOLS Ratchet Wrench, 3/8" Square Drive 3/8" Square Drive Flex Socket Adapter 1/4 in. x 3/8 in. Steel Square Socket Adapter Hex Bit Socket 3/8" Square Drive, 3/8" Size, 2-3/4" Long 6-Point Standard Socket, 3/8" Drive, 3/4" Size Ball-End Hex Key, 3/8" Ball-End Hex Key, ¼" ¾" Combination Wrench Screwdriver, #2 Phillips Soft Rubber Hammer Torque driver, 3/8" Square Drive Cordless Impact Driver 4 RX8100 ASSEMBLY INSTRUCTIONS & MANUAL 32-8100 REV.A HARDWARE ITEM 1 QUANTITY DESCRIPTION Zinc-Plated Alloy Steel Socket Head Screw 32 1/2"-13 Thread Size, 1" Long TORQUE: lubricated 55 ft-lb 2 Alloy Steel Socket Head Screw 6 5/16"-18 Thread Size, 2" Long, Partially Threaded 3 Aluminum Unthreaded Spacer 6 3/4" OD, 1-1/4" Long, for 5/16" Screw Size 4 Alloy Steel Socket Head Screw 1/2"-13 Thread Size, 5" Long 48 5 Steel Nylon-Insert Flange Locknut, Zinc-Plated, 48 1/2"-13 Thread Size 6 SS Washer .515" ID,.875" OD 56 7 SS WASHER 5/16", .344x.75x.05" 6 5 RX8100 ASSEMBLY INSTRUCTIONS & MANUAL ASSEMBLY | STEP 1 1. Assemble RIG as shown following assembly photos 2. Connect RIG members using Item 1 (hardware table) 3. Torque as specified 32-8100 REV.A 6 RX8100 ASSEMBLY INSTRUCTIONS & MANUAL 32-8100 REV.A ASSEMBLY | STEP 2 1. Using Item 3 LCD Display Extension Clamping Plate (main components table), install RX2100 Rope trainers as shown, spacing them equally. 2. Torque as specified 3. Connect 3.5mm sensor cable from each RX2100 unit to the corresponding LCD display cable coming from top of Item 3 DISPLAY VERIFICATION 1. Pull the rope all RX2100 to verify that display turns on and is counting 2. To reset display open the enclosure (4 screws on the front) and located the RED button. Long pressing RED buttons will reset the counter 3. Reassemble LCD enclosure ensuring that it sits properly in order to seal it properly 7 RX8100 ASSEMBLY INSTRUCTIONS & MANUAL ASSEMBLY | STEP 3 32-8100 REV.A 1. Attach Logo Plates Item 4 (component table) as shown, using Items 2, 3 & 7 (hardware table). 2. Note: it is important to make sure that the horizontal beams are placed properly in ASSEMBLY STEP 1, to make sure that Logo Plates threaded holes are facing up, and are on opposite ends as shown. 4 4 8 If you have any questions regarding ROPEFLEX equipment or any instruction found in this document, please call 650.549.5888 for assistance. 9