LiGHT SKY SHARK 400BSW 400W Waterproof Moving Head Beam Spot Wash User Manual

User Manual for LiGHT SKY models including: 0026, SHARK 400BSW 400W Waterproof Moving Head Beam Spot Wash, SHARK 400BSW, 400W Waterproof Moving Head Beam Spot Wash, Waterproof Moving Head Beam Spot Wash, Moving Head Beam Spot Wash, Head Beam Spot Wash, Beam Spot Wash, Spot Wash, Wash

未命名 -1

User Manual

2025-03-17 — 150 - 159. Colour system reset. 160 - 169. Gobo wheels reset. 170 - 179. Dimmer/Shutter reset. 180 - 189. Zoom/focus/frost/prism wheels reset. 190 - 199. Effect ...

400W IP66 waterproof moving head 3 in 1, beam spot wash-Lightsky

File Info : application/pdf, 28 Pages, 2.81MB

0026-SHARK-400BSW-User-Manual-20250317

SHARK 400BSW
Please read these user manual carefully before use!

1. Safety information ....................................................................................................2 2. Technical information ...............................................................................................5 3. Attachment and body size ........................................................................................9 4. Installation and connecting ....................................................................................10 5. Control panel ..........................................................................................................14 6. Menu setting ......................................................................................................................15 7. Channel function................................................................................................................18 8. Circuit connecting diagram ..............................................................................................24 9. Cleaning and maintenances .............................................................................................25 10. Troubleshooting....................................................................................................25 11. Duty exonerative and copyright protectio.............................................................27
Congratulations on choosing our company product! We thank you for your custom. Please keep in mind that this product, like other products of the company, adheres to the concept of people-oriented design and manufacture, and takes product quality as the foundation. We put the interests of customers first, and do our best to meet customer requirements. Please read this instruction manual carefully and keep it for future reference. In the case of fully understanding the product information, strictly abide by theUse the instruction manual to ensure that the product is installed, used and serviced correctly and safely. Our company is not responsible for any damage to lamps or other performance due to personal failure to follow the instructions during installation, use and maintenance.responsibility. Our company reserves the right to modify the manual at any time and without prior notice.
-1-

SAFETY INFORMATION
Please read the instruction carefully which includes important information about the installation, usage and maintenance.
WARNING Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also receive this manual. The following symbols are used to identify important safety information on the product and in this manual:
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems. Unpack and check carefully to ensure that there is no transportation damage before
using the unit. Do install and operate by qualified operator. The light source in this luminaire should be replaced by the manufacturer or its service
agent or a similarly qualified person, always cut off the power supply before replacing he light source. Do not allow children to operate the fixture. Use safety chain when fixing the unit. Handle the unit by carrying its base instead of head only.
-2-

The unit must be installed in a location with adequate ventilation, at least 20cm from adjacent surfaces.
Be sure that no ventilation slots is blocked, otherwise the unit will be overheated. Before operation, ensure that you are connecting this product to the proper voltage in
accordance with the specifications in this manual or on the product's specification label. It's important to ground the yellow/green conductor to earth in order to avoid electric shock. Minimum ambient temperature Ta: -20. Maximum ambient temperature Ta: 40.
Do not operate this product at a lower or higher temperature. Do not connect the device to any dimmer pack. When the lamp is running, do not place combustible objects next to it. The shortest
distance between the device and inflammable and explosive objects or materials is 0.5m. Make sure the power cord is not crimped or damaged; replace it immediately if
damaged. Unit's surface temperature may reach up to 80. do not touch the housing
bare-handedduring its operation. Avoid any flammable liquids, water or metal from entering the unit. once it happens,
cut off the mains power immediately. Do not operate in a dirty or dusty environment. do clean the fixture regularly. Do not touch any wire during operation as there might be a hazard of electric shock. Avoid entanglement of the power cord with other wires. The minimum distance to objects/surface must be more than 12 meters. In the event of serious operating problem, stop using the unit immediately. Never turn on and off the unit time after time. The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly
damaged. Do not open the housing as there are no user serviceable parts inside. Do not attempt to operate this unit if it becomes damaged. do not attempt any repairs
yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center if needed.
-3-

Disconnect this product from its power source before servicing. Do use the original packaging if the device is to be transported. Avoid direct eye exposure to the light source while the product is on. Do not operate this product if you see damage on the housing, shields, or cables.
Have the damaged parts replaced by an authorized technician at once. Installation:
The fixture should be fixed on the clamp. Always ensure that the unit is firmly fixed to avoid vibration and slipping off during operation. Ensure that the trussing or area of installation must be able to hold 10 times the weight without any deformation. Always install a safety cable that can hold at least 12 times the weight of the fixture when installing.
Do install and operate by qualified operator. It must be installed in a place where there is out of the reach of people.
-4-

TECHNICAL INFORMATION
OPTICS - Light source: NSL400S USHIO - Optical angle: Beam mode 2 ° -21 °, Spot mode 3 ° -42 ° - Optical lens: coated with high anti reflective film, 160mm - Color temperature: 6900K - Color rendering index: Ra74 - Illuminance: 236000 lux@10 rice - Expected service life of light source: 1500H (data provided by the light source supplier)
COLOUR - Color: 14 color chips+white light, capable of achieving bidirectional color rainbow, dual color step gradient (linear movement), bidirectional rotation of color wheel, random color mode - Color mixing system: independent CMY color mixing system, free color mixing
PATTERN - Fixed pattern: 11 patterns+white light+3 types of animations (animation effect patterns) with bi-directional shaking, animation, and flowing effects - Activity pattern: 8+1 activity pattern disc, pluggable and replaceable, capable of bidirectional shaking and flowing effect, pattern size is 11, outer size is 15.9
EFFECT - 4 Prisms: 1 Beam Prism, 3 Pattern Prisms, Bidirectional Rotation, Independent Switching, Stackable - Soft light effect: adjustable independent soft light effect
- Strobe: 0.5-9 times/second adjustable pulse flicker and random flicker - Dimming: 0-100% linear adjustment - Focusing: High precision electric focusing
CONTROL AND PROGRAMMING - Control channel: 28CH, please refer to the channel table for details - Protocol: Standard DMX512 protocol and RDM protocol - ArtNet protocol (optional) - Data connection: Three core or five core signal input/output - RJ45 interface (optional) - Display: LCD screen - Upgrade software through DMX signal
-5-

X/Y AXIS MOTION ANGLE - X-axis: 540 ° 8-bit/16bit precision scanning - Y-axis: 250 ° 8-bit/16 bit precision scanning - Reset function with automatic error correction - Fixed lock: Y-axis lock
POWER SUPPLY AND POWER - Input voltage: AC 100-240V 50/60Hz - Maximum power: 630W - Power factor: 0.987 - Maximum current of lighting fixtures: 2.9A/220V, 6.3A/100V
DIMENSION - Product size: 509 × 320 × 754mm - N.W.: 38.5kg - Carton packaging (default): 810 × 580 × 395mm - G.W.: 42.5kg
OTHER - Protection level: Ip66 - Work environment:- 20~ 40 (Note: When the lamp is working in an environment below zero degrees Celsius and powered on, the bulb needs to be preheated for 30 minutes before resetting all functions of the lamp before it can be used normally.) - Maximum surface temperature of lamp body: 80
APPROVALS - The product implementation standard: GB/T 7000.1-2023 GB/T 7000.217-2023 - Approved certifications: CERoHs - The product complies with the following EU directives: - Low Voltage Directive 2014/35/EU . EMC Directive 2014/30/EU
-6-

Distance(m) 0

Distance, spot diameter and illumination diagramBeam model

2°

21°

2°Lux Diameter(m)
21°Lux Diameter(m)

236000 0.36 3100 3.0

58000 0.74 700 5.95

22700 1.13 345 8.95

12500 1.48 208 11.90

8500 1.85 115 14.95

5700 2.22
68 18.0

4480 2.59
40 21.05

3120 2.96
28 24.05

Distance(m) 0

Distance, spot diameter and illumination diagramSpot model

3°

42°

3°Lux Diameter(m)
42°Lux Diameter(m)

900500 0.23 10500
3.76

227300 0.46 3170 7.52

100500 0.69 1070 11.2

57500 0.92 680 15

35200 1.15 510 18.8

24000 1.38 330 22.5

16000 1.6 55 26.3

12900 1.84
20 30.1

-7-

Static gobo wheel
2
3 45 2
6 1
7
White
8 14
9 13
12 11 10
Color wheel
3

Whiter

Rotating gobo wheel

CMY color mixing system

-8-

ATTACHMENT AND BODY SIZE

329 265
754 567
97
45
320 433
-2

509 370
270 117

-9-

INSTALLATION AND CONNECTING
Safety rope
Installing the projector- Fig. 3 The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall. WARNING:with the exception of when the projector is positioned on the floor, the safety rope must be fitted. This must be securely fixed to the support structure of the projector and then connected to the base handle. Make sure all parts for fixing the projector are in a good state of repair. Make sure the point of anchorage is stable before positioning the projector. When suspending the fixture, ensure that the supporting structure and all hardware used can
hold at least 10 times the weight of all the devices they support.
-10-

power in out

in power end

The L terminal is connected with the brown line.
Watertight seal ring

The ground wire is connected to the yellow-green wire
The N terminal is connected with the blue line.

Watertight seal ring
The stage lighting delivers a three-core waterproof plug. The stage lighting power supply can not be more than 2pcs pre line. Connection to the eiectricty mains must be carried out by a qualified electrical installer. After doing the above operation and making sure all the devices had been installed with
natural operate, press the power switch to check whether everything is working normally. -11-

DMX512 in out
DMX - output 1 - Shield 2 - Signal (-) 3 - Signal (+) 4 - Not connected 5 - Not connected

in out

in signal end
DMX-input 1- Shield 2 - Signal (-) 3 - Signal (+) 4 - Not connected 5 - Not connected

-12-

6 -13-

CONTROL PANEL
7

Display

Up arrowhead : page up Down arrowhead : page down Left arrowhead : reduce Right arrowhead : increase Enter : OK function Exit : in the choice screen

LEFT

UP ENTER
RIGHT

DOWN

Press the switch.The projector starts resetting the effects. At the same time,the following information scrolls on the display
please refer to the actual material)
8

D 0

M 0

X 1

dress

Service

Information
Lamp

Personal Language

Manual control Reversal

-14-

Main menu

DMX Address

Address :001-512

Totel Time

Lamp Hours

Temperature

RDM UID

Fan speed/Voltag

Information DMX Live

System Version Return(ESC)

Power :****(h) Lamp ON :****(h)

Total :****(h) Lamp Open :****(h)

E-ballast:000.0

Out Temp

In Temp :000.0

***********

1.L_Fan :**.*V

2.Out Fan :**.*V

3.In Fan :**.*V

4.L_Fan :****R

5.OutFan1 :****R

6.OutFan2 :****R

7.OutFan3 :****R

8.In Fan1 :****R

9.In Fan2 :****R

1.Pan

***

2.Pan Fine ***

3.Tilt

***

4.Tilt Fine

***

5.Functions

***

6.Dimmer

***

7.Shutter

***

8.Cyan

***

9.Magenta

***

10.Yellow

***

11.Colour

***

12.StaticGobo ***

13.Rot Gobo ***

14.Gobo Rot ***

15.Prism 1

***

16.Prism1 Rot

***

17.Prism 2 ***

18.Prism2 Rot

***

19.PrismMacro ***

20.Macro Rot.

***

21.Frost

***

22.Zoom

***

23.Zoom Fine ***

24.Focus ***

25.Focus Fine ***

26.Focus 2 ***

27.AutoFocus ***

28.Effect Mac

XY :V*.**

Gobo V*.**

CMYCMY V*.** Fan V*.**

Prism V*.**

Display V*.**

-15-

Main menu

menu Auto lamp on

P/T invert

Personal

Display

Return(ESC)

Channel control

Manual

control

Reset

OFF ON

Pan invert
Tilt invert

Return(ESC)

Language

Back Light
Reversal

Backlight blink Return(ESC)

1.Pan

***

2.Pan Fine ***

3.Tilt

***

4.Tilt Fine ***

5.Functions ***

6.Dimmer ***

7.Shutter ***

8.Cyan

***

9.Magenta ***

10.Yellow ***

11.Colour

***

12.StaticGobo ***

13.Rot Gobo

***

14.Gobo Rot

***

15.Prism 1

***

16.Prism1 Rot ***

17.Prism 2

***

18.Prism2 Rot ***

19.PrismMacro ***

20.Macro Rot. ***

21.Frost

***

22.Zoom

***

23.Zoom Fine ***

24.Focus ***

25.Focus Fine ***

26.Focus 2 ***

27.AutoFocus ***

28.Effect Mac

Return(ESC)

System reset

Pan/Tilt reset

Gobo reset

Color reset Dimmer reset

Zoom reset

-16-

OFF ON

English Chinese

Open

Auto close(15s)

Normal Rota.180

ON OFF

Main menu

Test
Return(ESC) Error list Clean error

Calibration

Service

Effects reset

Return(ESC)

Test P/T

Test Test

effect all

Return(ESC)

Keep List Empty List

Pan

Tilt

Dimmer

NC/NC

Focus

Zoom

Colour

Gobo

Prism 1

Prism 2

NC/NC

Frost

Cyan

Magenta

Yellow

Rota.Gobo

Return(ESC)

Load default

000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255 000-255

Reset timers

menu
STEP *** STEP *** STEP ***

Factory

Developer

Lamp Language
Reversal

return

Off On

English Chinese

Normal

Rota.180

(ESC)

Firmware update Return(ESC)

-17-

CHANNEL FUNCTION(V1.0)

Channel
1 2 3 4

DMX
0-255 0-255 0-255 0-255
0-9 10-14 15-19 20-24 25-29

Percentage

0-100 0-100 0-100 0-100

Pan Pan Fine Tilt Tilt fine Function Reserved (0=default) Reserved Reserved Reserved Reserved

Function

30-34

35-39

40-44

45-49

50-54

55-59

60-64

65-69

70-74

75-79

80-84

85-89

90-94

95-99

100-101

102-103

104-105

106-107

108-119

120-124

125-129

130 - 139

140 - 149

150 - 159

160 - 169

170 - 179

180 - 189

190 - 199

200 - 209

210 - 229

230 - 239

240 - 244

245 - 249

250 - 255

6 0 - 255

0 - 31 32 - 63 64 - 95 96 - 127 7 128 - 143

Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Lamp On Pan/Tilt reset Colour system reset Gobo wheels reset Dimmer/Shutter reset Zoom/focus/frost/prism wheels reset Effect wheel reset Total reset Reserved Lamp Off Reserved Reserved Reserved Dimmer intensity Dimmer intensity from 0% to 100% (0=default)
Shutter/ strobe Shutter closed Shutter open (32=default) Strobe-effect from slow to fast Shutter open Opening pulse in sequences from slow to fast

-18-

Channel

DMX Percentage

Function

144 - 159 160 - 191 192 - 223 224 - 255
8 0 - 255

Closing pulse in sequences from fast to slow Shutter open Random strobe-effect from slow to fast Shutter open, Full lamp power Cyan Cyan from min. saturation --> full cyan (0=default)

9 0 - 255

Magenta Magenta from min. saturation --> full magenta (0=default)

10 0 - 255

Yellow Yellow from min. saturation --> full yellow (0=default)

0-4 5-8 9-12 13-16 17-20 21-24 25-28 29-32 33-36 37-40 41-44 45-48 49-52 53-56 57-60 61-64 65-68 11 69-72 73-76 77-80 81-84 85-88 89-92 93-96 97-100 101-104 105-108 109-112 113-116 117-120
121 - 181
182 - 188
189 - 249
250 - 255
0-3

Colour wheel Continual positioning White White+Red Red Red+Orange Orange Orange+Aquamarine Aquamarine Aquamarine+Green Green Green+Light Green Light Green Light Green+Lavender Lavender Lavender+Pink Pink Pink+Yellow Yellow Yellow+Magenta Magenta Magenta+Cyan Cyan Cyan+CTO 260 CTO 260/CTO2 CTO 260+CTO 190/CTO2+CTO1 CTO 190/CTO1 CTO 190+CTB 8000/CTO1+CTB CTB 8000/CTB CTB 8000+Blue Blue Blue+White
Forwards rainbow effect from fast to slow
No rotation
Backwards rainbow effect from slow to fast
Auto random colour selection from fast to slow
Static gobo wheel White

-19-

Channel

DMX Percentage

Function

4-7 8-11 12-15 16-19 20-23 24-27 28-31 32-35 36-39 40-43 44-47
48-60 12 61-73
74-86 87-99 100-112 113-125 126-138 139-151 152-164 165-177 178-190 191-207 208-226
227-230
231-249

Gobo1 Gobo2 Gobo3 Gobo4 Gobo5 Gobo6 Gobo7 Gobo8 Gobo9 Gobo10 Gobo11 Shaking gobos from slow to fast Gobo1 Shake Slow-Fast Speed Gobo2 Shake Slow-Fast Speed Gobo3 Shake Slow-Fast Speed Gobo4 Shake Slow-Fast Speed Gobo5 Shake Slow-Fast Speed Gobo6 Shake Slow-Fast Speed Gobo7 Shake Slow-Fast Speed Gobo8 Shake Slow-Fast Speed Gobo9 Shake Slow-Fast Speed Gobo10 Shake Slow-Fast Speed Gobo11 Shake Slow-Fast Speed Effect Shake Slow-Fast Speed Forwards gobo wheel rotation from fast to slow No rotation Backwards gobo wheel rotation from slow to fast

250-255

Auto random gobo selection from fast to slow

Rotating gobo wheel

0 1-8 9-21 22-34 35-47 48-60 61-73 74-86 87-99 13 100-112
113-125 126-138 139-151 152-164 165-177 178-190 191-203 204-216 217-249

I ndex - set indexing on channel 14 Open/Hole (0=default) Hole (flat field)
Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 8 Shaking gobo from slow to fast Index - set indexing on channel 14
Gobo 1 Gobo 2 Gobo 3 Gobo 4 Gobo 5 Gobo 6 Gobo 7 Gobo 8 Open/hole

-20-

Channel

DMX Percentage

Function

250-255

Auto random gobo selection from fast to slow

Rot. gobo indexing and rotation

0 - 127 14 128 - 187
188-195 196 - 255

0-3
4-15 15 16-27
28-39
40-51 52-63 64-75 76-255

0 - 255

0-3

4-34

35-65

66-96

97-127

128-188

189-194 195-255

0-3

4-15

16-27 28-255

0-255

4-34

35-65

66-96

97-127

Gobo indexing
Forwards gobo rotation from fast to slow
No rotation
Backwards gobo rotation from slow to fast
Prism wheel 1 This wheel is blocked If Rotating gobo wheel >0 DMX
Open position/hole (0=default) Index - set indexing on channel 16 Prism 3 - 6-facet linear Prism 2 - 4-facet 12° circular Prism 1 - 8-facet 12° circular Rotation - set rotation on channel 16 Prism 3 - 6-facet linear Prism 2 - cylindrical Prism 1 - 8-facet 12° circular Raw DMX Prism wheel 1 indexing/rotation Prism indexing - set position on channel 15
Prism 1 indexing
Prism 1 rotation - set position on channel 15
No rotation Slow Fast,90°Rotating back and forth Slow Fast,180°Rotating back and forth Slow Fast,270°Rotating back and forth Slow Fast, 360°Rotating back and forth Forwards prism rotation from fast to slow
No rotation (128=default) Backwards prism rotation from slow to fast Prism wheel 2 Open position/hole (0=default) Index - set indexing on channel 18 Prism - 8-facet 18° circular Rotation - set rotation on channel Prism - 8-facet 18° circular Raw DMX Prism wheel 2 indexing/rotation Prism indexing - set position on channel 17
Prism indexing Prism rotation-set position on channel 17
No rotation Slow Fast,90°Rotating back and forth Slow Fast,180°Rotating back and forth Slow Fast,270°Rotating back and forth Slow Fast, 360°Rotating back and forth

-21-

Channel

DMX Percentage

Function

128-188 189-194 195-255

Forwards prism rotation from fast to slow No rotation (128=default) Backwards prism rotation from slow to fast Pattern sellection

0-3
4-14 15-25 26-36 37-47 48-58 59-69 70-80 19 81-91 92-102 103-113 114-124 125-135 136-146 147-157 158-168 169-179 180-190 191-255
0 - 255 20
0 1-127
128 129-255
0-19 20-128 21 129-169 170-210 211-255
22 0 - 255
23 0 - 255
24 0 - 255
25 0 - 255

Open position/hole (0=default) Index - set indexing on channel 20 Prism macro Index 1 Prism macro Index 2 Prism macro Index 3 Prism macro Index 4 Prism macro Index 5 Prism macro Index 6 Prism macro Index 7 Rotation - set rotation on channel 20 Prism macro rotation 1 Prism macro rotation 2 Prism macro rotation 3 Prism macro rotation 4 Prism macro rotation 5 Prism macro rotation 6 Prism macro rotation 7 Prism macro rotation 8 Prism macro rotation 9 Prism macro rotation 10 Raw DMX Pattern rotation and indexing The channels are blocked: Prism Wheel 1/2, Prism Wheel 1/2 rot.
Pattern indexing - set position on channel 19
Pattern indexing Pattern rotation - set position on channel 19
No rotation Forwards pattern rotation from fast to slow
No rotation (128=default) Backwards pattern rotation from slow to fast
Frost Open (0=default) 100% Light Frost Pulse closing from slow to fast Pulse opening from fast to slow Ramping from fast to slow Zoom Zoom from max. to min.beam angle (128=default)
Zoom - fine Fine zooming (0=default) Focus Continuous adjustment from far to near (128=default)
Focus Fine Fine focusing (0=default)

-22-

Channel

DMX

0-255

Percentage

Function

Focus2 AutoFocus on channel 27 AutoFocus
Autofocus (priority & distance selection)

Select desired distance and effect on which you need to focus and use "Focus2" channel (26) to focus the image.

0-15 27 16-55
56-95 96-135 136-175 176-215 216-255
0-15 16-25 26-35 36-45 46-55 56-65 66-75 76-85 86-95 96-105 106-115 28 116-125 126-135 136-145 146-155 156-165 166-175 176-185 186-195 196-205 206-215 216-225 226-235 236-245 246-255

Autofocus Off 10 metres 15 metres 20 metres 30 metres 40 metres 50 metres Effect Macro Reserved Effect 1 Effect 2 Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved Reserved

-23-

CIRCUIT CONNECTING DIAGRAM

-24-

CLEANING AND MAINTENANCES
In order to ensure the projector could work normally.It should be kept clean always .It is recommended that the fans and ventilation in let should be cleaned every 15 days.The lens and dichroic colour filters should also be reg -ularly cleaned to maintain an optimum light output.Do not use any type of solvent on dichroic colour filters.It will damage the projector.
Suggestion:The continue usage of the light don't exceed 4 hours.Or it will shorter the usage of the lamp.Please use the alternative operation to solve this problems.
Please disconnect the power supply when begin to maintenaceor takedown the light.Please let the parts cool down 10 minute at least then begin to install.If need to replace the lamp,please wait 10 minute again at least to let the lamp cool down completely or which maybe burned down.
Please inspect the lens or other moving parts timing and keep them clear and static.If find anything damaged or losseness,must change a lamp or fix the lamp in order to avoid the accident.
The light use the strong cool system. It is easy for the dirty to be collected .Please do clear the hot-sak one time two week at least.
After you use the light,please check the intake place whether there are some wastepaper,please clean it up,or the windmill will break down and causing fire.
TROUBESHOOTING
It is recommended some solution for some normal trouble shooting.Any unsolutioned problems should always be handle by the professional person.Disconnect the power supply before maintenance the light. Lamp off
Please check if install the suitable lamp. Please check the connection of the power supply or switch is ok. Please check whether the lamp will reach the end of their life can explode ,please replace a same description
lamp. Please measure if the power supply is enough. Please check if the operation is correct.Please wait 30 minutes at least till the lamp cool down enough,then
could the connect the power supply,which could be normal work. Please check whether the DMX 512 controller pass the "turn on" order. Please check the connection of the trigger circuit is loose contact. Please check whether the connected point of the trigger point is loose contact ,faster the connect cable .
Please check if the switch of the temperature is damaged. Check the bottom box driver board "WK" socket if the resistance 0 between the two line. The light beam is dark,not inhomogeneou: When the lamp is to the usage life,the light is not enough,please change a new one for the same description . Please check the reflector parts is dirty.Keep them clear. Please measure if the power supply is enough. Small adjusting is suitable for change height or screw system till get a ideal light beam.
-25-

The light shadow is fogging: Please check the data on the DMX 512 controller is suitable for the electric focus. Please check the machenical parts is jamging.After cleaning,please add some temperature -durable juice.
The light works interruptly: Please check if the fan works normally or mote clogging. Please check whether the abstract heat have the mote clogging. Please check if the lamp is to the usage life. Please check if the power supply is enough,the connection of the power supply or the circuit are good. Please check if the switch of the sup-temperature is good.
Though the light is lighting,but it couldn't accept the control order: Please check the start code address and the function option are correct. Please check whether the communicate control cable is ongood connection or the cable is too long or interrupt. Please check the control system is not valid,check the singal amplifier of chain connected is valid. Please check whether the communicate cable is too long or the other equipment is mutually conjugate. Please arrange the wire well ,,Shorter the signal cable ,put the high voltage cable and low voltage cable separ -ately . Add the signal amplify isolator. Signal cable is used the excellent screening doublet (Resistance 75 The end of the light end and the end resistance. When the lamp don't cool down enough but do the incorrect operation will let the trigger up to super- high voltage leak.It will damage the electric circuit and communicate IC or CPU .Under this condition,please change the PCB board.
the light can't move: Please check if the power supply is suitable for the light voltage data. Please check the fuse of input voltage is defective. Please check the light if they are deformating,inside parts is broken,become wet...etc will lead the loose contact. Please check if the inside lead wire and the connector is loose. Please check the electric parts (such as the switch,transformer,ballast,electric capacity, piezoresistor, filter, PCB board,controller to motor) is short-circuit or burn down.
Part of the projector couldn't be responsled to the controlling order: Please check the order is correct to the moving. Please check the mechanicalpart is deformation or loose. Please check the function to the motor socket is loose or drive chip is burn down. Please check the wire of the motor is cut at zig point. Please check these function to the motor is damaged.
On working,the pan &tilt couldn't work normally: Please check according to the above step by step. Please check the belt of the X.Y is broken. Please check the X/Y direction data to the receiver is damage. Re-projector reset.
-26-

DUTY EXONERATIVE AND COPYRIGHT PROTECTION
The lamp belongs to consumption products that is not guarantee to keep it in good repair. Any products broken that didn't according to the instruction is not guarantee to keep it in good repair. The commentary for all the instruction belongs to the supplier in final. No authorize can't copy. The information in this manual may be changed in the future,the company reserve the right to change
the data without any advise.
-27-

References

normally.It

Corel PDF Engine Version 16.1.0.843