meitrack K211 Lora GPS Smart Lock User Guide

User Guide for meitrack models including: K211 Lora GPS Smart Lock, K211, Lora GPS Smart Lock, GPS Smart Lock, Smart Lock, Lock

53

jinhu.me

CD for K211 Series - Meitrack

MEITRACK K211L GPS Smart Lock User Guide

MEITRACK K211 GPS Smart Lock User Guide

17 feb 2023 — MEITRACK K211 GPS Smart Lock User Guide ... 6.6.10 Setting the automatic authorization time of swiping the RFID card ... Use common Android data cable.

File Info : application/pdf, 21 Pages, 1.75MB

MEITRACK K211 Series User Guide

MEITRACK K211L GPS Smart Lock User Guide
MEITRACK K211L GPS Smart Lock User Guide
Applicable Model: K211L

MEITRACK K211L GPS Smart Lock User Guide

File Name Project
Subproject Version

Change History

MEITRACK K211L GPS Smart Lock User Guide

K211L

Creation Date

Update Date

User Guide

Total Pages

V1.0

Confidential

2022-07-21
21 External Documentation

- 2 -

MEITRACK K211L GPS Smart Lock User Guide

Contents
1 Copyright and Disclaimer........................................................................................................................................... - 4 2 Product Introduction ................................................................................................................................................. - 4 -
2.1 Product Features........................................................................................................................................... - 4 2.1.1 LoRa Communication (Optional).......................................................................................................... - 4 2.1.2 Locking or Unlocking the K211L ........................................................................................................... - 5 2.1.3 Dual SIM Cards..................................................................................................................................... - 6 2.1.4 Magnetic Charging ............................................................................................................................... - 7 2.1.5 Strong Magnetic Adsorption................................................................................................................ - 7 2.1.6 Anti-collision Soft Adhesive ................................................................................................................. - 8 2.1.7 Security Performance - Super Password .............................................................................................. - 8 -
3 Product Functions...................................................................................................................................................... - 9 3.1 Position Tracking ........................................................................................................................................... - 9 3.2 Alerts ............................................................................................................................................................ - 9 3.3 Other Functions .......................................................................................................................................... - 10 -
4 Product Specifications ............................................................................................................................................. - 10 5 Main Device and Accessories .................................................................................................................................. - 11 6 First Use ................................................................................................................................................................... - 11 -
6.1 Installing a SIM Card ................................................................................................................................... - 11 6.2 Turning on the K211L .................................................................................................................................. - 12 6.3 LED Indicator............................................................................................................................................... - 13 6.4 Device Configuration .................................................................................................................................. - 13 -
6.4.1 Installing the USB Driver .................................................................................................................... - 13 6.4.2 Configuring Device Parameters by Meitrack Manager....................................................................... - 14 6.5 Binding or Unbinding the T399G ................................................................................................................ - 15 6.5.1 Binding the T399G ............................................................................................................................. - 15 6.5.2 Unbinding the T399G......................................................................................................................... - 15 6.6 Common SMS Commands .......................................................................................................................... - 16 6.6.1 Setting GPRS Parameters A21 ......................................................................................................... - 16 6.6.2 Setting a Smart Sleep Mode A73 .................................................................................................... - 16 6.6.3 Setting the Maximum Working Time of the Woken GPS Module A83 ............................................ - 16 6.6.4 Setting the SMS Time Zone B35 ...................................................................................................... - 17 6.6.5 Disabling the Power-off Function of the Power Button C77 ........................................................... - 17 6.6.6 Authorizing an RFID Card D10......................................................................................................... - 17 6.6.7 Authorizing RFID Cards in Batches D11........................................................................................... - 17 6.6.8 Locking or Unlocking the K211L D82............................................................................................... - 18 6.6.9 Selecting a Locking Method D83..................................................................................................... - 18 6.6.10 Setting the automatic authorization time of swiping the RFID card DB0 ...................................... - 18 6.6.11 Changing Super Password F22 ...................................................................................................... - 19 7 Using the Platform................................................................................................................................................... - 19 7.1 MS03 Tracking System ................................................................................................................................ - 19 7.2 Authorizing RFID Cards in Batches by MS03 ............................................................................................... - 19 8 Device Installation ................................................................................................................................................... - 21 -

- 3 -

MEITRACK K211L GPS Smart Lock User Guide

1 Copyright and Disclaimer

and are trademarks that belong to Meitrack Group and its subsidiary.

The user manual may be changed without notice. Without prior written consent of Meitrack Group, this user manual, or any part thereof, may not be reproduced for any purpose whatsoever, or transmitted in any form, either electronically or mechanically, including photocopying and recording. Meitrack Group shall not be liable for direct, indirect, special, incidental, or consequential damages (including but not limited to economic losses, personal injuries, and loss of assets and property) caused by the use, inability, or illegality to use the product or documentation.

2 Product Introduction

The K211L is a GPS smart lock that supports Long Range (LoRa) and GPRS communication. Its main functions include real-time lock status monitoring, anti-tamper alert, anti-cut alert, swiping an RFID card to lock or unlock the device, and super long standby time. There is no button on the outer case of the device, and the IP67 water resistance rating makes the device withstand harsh environments ,and the device also has a crash-proof housing design. It is specially designed for door lock management in various land and sea transportation such as box trucks, trailers and containers.
2.1 Product Features

2.1.1 LoRa Communication (Optional)

This function is used for communication between the K211L and the T399G vehicle tracker. After the LoRa connection is successful, the K211L will send information such as lock status information and battery power to the T399G via LoRa. To establish LoRa communication between the K211L and the T399G, the two devices must be bound each other. For details about how to bind the T399G to the K211L, see the section 6.5 "Binding or Unbinding the T399G." LoRa connection process:

Start the two devices and connect
them to a PC.

Start Meitrack Manager and bind
the T399G.

The LoRa connection will be established automatically after the two devices are
bound.

The LoRa connection is established
successfully if the LVS LED indicator
blinks.

T399G and K211L communication features:
The K211L can be connected to the T399G via LoRa to upload data.

One T399G tracker can be connected to at most 30 K211L devices at the same time.

- 4 -

MEITRACK K211L GPS Smart Lock User Guide Communication diagram

K211L Working Mode

Status

LoRa connected

The GPS and GSM modules of the K211L enter the sleep

mode, and its lock status information and alerts will be

uploaded to the server through the T399G.

LoRa

Deep sleep mode (send heartbeat After the K211L is started properly, if no event is triggered,

disconnected packets once every one hour)

the K211L will enter the deep sleep mode (the GPS module

will stop) after five minutes (default time). The wakeup

conditions include vibration, swiping RFID cards ,Call ,SMS

and sending heartbeat packets.

Super deep sleep mode (send After the K211L is started properly, if no event is triggered,

heartbeat packets once every one the K211L will enter the deep sleep mode the GPS and GSM

hour)

module will stop) after five minutes (default time). The

wakeup conditions include vibration, swiping RFID cards and

sending heartbeat packets.

Sleep mode disabled

Report data at the preset interval.

2.1.2 Locking or Unlocking the K211L

Locking or Unlocking by Swiping RFID Cards

- 5 -

MEITRACK K211L GPS Smart Lock User Guide
The function is used to lock or unlock the K211L by swiping authorized RFID cards. When you swipe an RFID card, the K211L will automatically detect and record the unlocking time, location and RFID card number, and these data will be sent to the server. Operation process: Put the authorized RFID card on the K211L's card swiping area. When the K211L detects this action, the buzzer will beep and the LVS LED indicator will be steady on, indicating that the K211L is unlocked. In this way, the last step for you is to pull out the lock rope. (To lock the K211L, you only need to swipe the RFID card once. Then the buzzer will beep and the LVS LED indicator will be off, indicating that the K211L is locked.) Swiping an RFID card:

Note: In the locking or unlocking state, if you swipe an unauthorized RFID card, the buzzer will beep twicebut the K211L cannot be unlocked and locked. If you swipe an authorized RFID card, the buzzer will beep once. Before the K211L is locked,it is recommended to apply appropriate force on the lock rope first to make the waterproof ring of cable fully contact with the lock hole and improve the waterproof performanceand if the lock rope is cut, K211L cannot be locked. After the K211L is unlocked, if you do not pull out the lock rope within one minute, the K211L will be locked automatically.

Locking or Unlocking by Commands

Command Description

How to Send

D82

This command is used to lock or Send the command by SMS or GPRS. For details about

unlock the K211L.

the SMS command format, see the section 6.6.8

"Locking or Unlocking the K211L D82."

D83

This command is used to select a Send the command by SMS or GPRS. For details about

locking method: auto locking or the SMS command format, see the section 6.6.9

locking by swiping RFID cards.

"Selecting a Locking Method D83."

2.1.3 Dual SIM Cards

The K211L can be installed with two Micro SIM cards and supports the dual SIM single standby mode. The device will automatically select a SIM card to register the network. SIM1 (on the right) will be selected by default. If SIM1 fails to register the network, SIM2 (on the left) will be selected to do this. (Please ensure that at least one SIM card can be used normally.)

- 6 -

MEITRACK K211L GPS Smart Lock User Guide

2.1.4 Magnetic Charging
You can use the magnetic charging cable to charge the K211L. The device supports 9V/2A power adapter, and it will take a total of 7.58 hours to charge the device fully.
2.1.5 Strong Magnetic Adsorption
The back of the cover plate has strong magnetic, which can be adsorbed to the car door to prevent the device from shaking during movement.

- 7 -

MEITRACK K211L GPS Smart Lock User Guide
2.1.6 Anti-collision Soft Adhesive
The gray protruding part in the figure is Anti-collision soft adhesive, which has shock absorption effect and it can effectively protect the device from being damaged in the collision.
2.1.7 Security Performance - Super Password
To enhance security, K211L supports super password. Super password (the default is 666888) supports all SMS commands, but DB0 / D82 / D10 / D11 / D14 D15 / A21 / F22 commands can't use the original SMS password (the default is 0000), they can only use super password. When setting GPRS parameters through Meitrack Manager, you need to open the super password first before setting successfully:

- 8 -

MEITRACK K211L GPS Smart Lock User Guide

Note It is recommended to set a new super password first, because the super password is related to the security of unlocking; The default super password is 666888, which can be modified by Meitrack Manager and F22 command.Please make sure to remember the super password, and the super password cannot be quested and reset to the original value, once you forget the password, it will not be able to recover.

3 Product Functions

3.1 Position Tracking
GPS + LBS positioning Real-time location query Tracking by time interval Tracking by distance Tracking by mobile phone Speeding alert Cornering report Geo-fence

3.2 Alerts

Alert

Description

Outer case removal/open alert An alert will be generated when the K211L's outer case is removed or the

back cover is opened.

Lock tamper alert

An alert will be generated when the lock rope is cut off.

T399G disconnected alert (LoRa An alert will be generated when the K211L is disconnected from the

communication is required)

T399G.

Unlocking alert

An alert will be generated when you swipe an authorized RFID card to

- 9 -

MEITRACK K211L GPS Smart Lock User Guide

Locking alert Unlocking failure alert Locking failure alert

unlock the K211L. An alert will be generated when you swipe an authorized RFID card to lock the K211L. An alert will be generated when the K211L fails to be unlocked by swiping an authorized RFID card. An alert will be generated when the K211L fails to be locked by swiping an authorized RFID card.

3.3 Other Functions

Function

Description

Binding and unbinding

Enter the IMEI number of the T399G on Meitrack Manager software to

bind the T399G to the K211L.

LoRa communication (optional) Report lock status information of the K211L via LoRa.

Deep sleep mode

The K211L can be woken up by vibration, swiping RFID cards and

sending heartbeat packets. If no event is triggered, the K211L will enter

the deep sleep mode after five minutes (default time).

Dual SIM cards

The K211L can be installed with two Micro SIM cards and supports the

dual SIM single standby mode.

OTA update

Online OTA firmware update

Remote unlocking or locking by The D82 command is used to lock or unlock the K211L. You can send

commands

this command by SMS or MS03 platform.

4 Product Specifications

Item Dimension Lock rope length Weight Power supply Material Backup battery Power consumption

Charging time Operating temperature Operating humidity Working hour

Charging

Water resistance rating

Frequency

K211L-ER

Description 112 mm x 195 mm x 37 mm 300 mm (The length can be customized as needed.) 800g DC 914 V; 2 A The outer case of the device adopts PC materials. 14000 mAh/3.7 V Current in standby (sleep) mode: 9 mA Current in normal working mode: 95 mA 7.58 hours -20°C to 55°C 5%95 % Power-saving mode: 78 days Normal working mode: 150 hours Magnetic charging (DC 9 V; 2 A; fast charging) IP67 GSM:850/900/1800/1900

- 10 -

MEITRACK K211L GPS Smart Lock User Guide

band

K211E

GPS antenna GPS sensitivity Positioning accuracy LoRa communication distance (optional) LoRa working frequency (optional) LoRa antenna (optional) RFID module frequency Memory SIM card installation

LTE-FDD:B1/B3/5/B7/B8/B20/B28 GSM:850\900\1800\1900 Cat M1/Cat NB2: LTEFDD:B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26/B27/B28/B6 6/B71/B85 Built-in GPS antenna -161 dB 2.5 meters At most 20 meters (obtained from actual tests in trucks' containers)
1371020 MHz (433 MHz by default)
Built-in spring antenna 125 KHz 8 MB Flip the card slot cover to install Micro SIM cards; dual SIM cards

5 Main Device and Accessories

GPS smart lock with the battery

Lock rope (30 cm)

RFID card

Power adapter(9V)

Magnetic USB charging cable

CD download card
Note: 1. Two RFID cards are standard, optional more and white type RFID card. The Power adapter(9V) can choose UL or
VDE. 2. USB cable is optional. Use common Android data cable.
6 First Use
6.1 Installing a SIM Card
Remove the four screws from the cover and take the cover out.

- 11 -

MEITRACK K211L GPS Smart Lock User Guide Insert a SIM card into one of the card slots (SIM1: right; SIM2: left).

6.2 Turning on the K211L
Press the power button for 3 seconds. Then the GPS and GSM LED indicators will blink fast, indicating that the device is turned on.

- 12 -

MEITRACK K211L GPS Smart Lock User Guide

6.3 LED Indicator

LVS LED Indicator (Green)

Steady off

The K211L is locked or is not connected to the T399G.

Steady on

The K211L is unlocked.

Blink fast (0.2 seconds on and 4.8 The K211L is connected to the T399G.

seconds off)

GPS LED Indicator (Blue)

Blink fast (once every 0.1 seconds) The K211L is being initialized, or the battery power is low.

Blink fast (0.1 seconds on and 2.9 A GPS signal is received.

seconds off)

Blink slowly (1 second on and 2 No GPS signal is received.

seconds off)

GSM LED Indicator (Green)

Steady on

There is an incoming call, or the subscriber you dialed is busy now.

Blink fast (once every 0.1 seconds) The K211L is being initialized.

Blink fast (0.1 seconds on and 2.9 A GSM signal is received.

seconds off)

Blink slowly (1 second on and 2 No GSM signal is received.

seconds off)

CHG LED Indicator (Red)

Steady off

The external power supply is disconnected.

Steady on

The K211L is charging.

6.4 Device Configuration
6.4.1 Installing the USB Driver
Install the USB driver on a computer with 64-bit Windows system.

After the installation is finished, connect the K211L to the computer by USB cable. If Prolific USB-to-Serial Comm Port (COM3) is displayed on the Device Manager page, the driver is installed successfully. Note: Before connecting the K211L to the computer by USB cable, turn on the K211L first. Otherwise, it cannot be detected by Meitrack Manager.

- 13 -

MEITRACK K211L GPS Smart Lock User Guide

6.4.2 Configuring Device Parameters by Meitrack Manager
This section describes how to use Meitrack Manager to configure the K211L on a computer. Operation steps: 1. Install the USB driver and Meitrack Manager. 2. Connect the device to a computer by using the USB cable.
3. Run Meitrack Manager (6.0.0.9 version or later), then the following dialog box will appear:

4. Turn on the device, then Meitrack Manager will automatically detect the device model and the parameter page will appear accordingly.
For details about Meitrack Manager, see the MEITRACK Manager User Guide.

- 14 -

MEITRACK K211L GPS Smart Lock User Guide
6.5 Binding or Unbinding the T399G
6.5.1 Binding the T399G
To make the K211L and T399G communicate with each other via LoRa, bind the two devices. An IMEI number is the default binding information. Perform the following steps to bind the T399G: 1. Go to the Peripheral page of Meitrack Manager. 2. Enter the IMEI number of the T399G. 3. Click Binding. 4. Click Set. After the binding is successful, the IMEI number of the T399G will displayed on the GPS Smart Lock Information area.

Note: To establish LoRa communication between the K211L and the T399G, the two devices must be bound each other. Please connect the T399G to the computer, and then repeat the above operations to bind the K211L.
6.5.2 Unbinding the T399G
This operation is used to disconnect the communication between the K211L and the T399G. After the unbinding is successful, the GPS positioning and GSM communication functions of the K211L will be enabled automatically. Lock status information will be uploaded to the server through the K211L. Perform the following steps to unbind the T399G: 1. Go to the Peripheral page of Meitrack Manager. 2. Select the IMEI number to be unbound. 3. Click Unbind. 4. Click Set.

Note: The binding and unbinding functions are only available for the K211L with a LoRa module.

- 15 -

MEITRACK K211L GPS Smart Lock User Guide

6.6 Common SMS Commands

6.6.1 Setting GPRS Parameters A21

SMS Sending SMS Reply Description
Example SMS Sending SMS Reply

Password,A21,Connection mode,IP address,Port,APN,APN user name,APN password IMEI,A21,OK Connection mode = 0: function disabled. Connection mode = 1: function enabled; use the TCP/IP reporting mode. Connection mode = 2: function enabled; use the UDP reporting mode. IP address: IP address or domain name. A maximum of 32 bytes are supported. Port: a maximum of 5 digits. APN/APN user name/APN password: a maximum of 32 bytes respectively. If no user name and password are required, leave them blank. Note: this command can only use super password.
666888,A21,1,server.meigps.com,8800 ,CMNET,, 353358017784062,A21,OK

6.6.2 Setting a Smart Sleep Mode A73

SMS Sending SMS Reply Description
Example SMS Sending SMS Reply

Password,A73,0 IMEI,A21,OK When the sleep level is 0, the sleep mode is disabled (default). When the sleep level is 1, the tracker enters the normal sleep mode. The GSM module always works, andthe GPS module occasionally enters the sleep mode. The tracker works 25% longer in the normal sleep mode than that in the normal working mode. This mode is not recommended for short interval tracking; this will affect the route precision. When the sleep level is 2, the tracker enters deep sleep mode. If no event (RFID, shear line, vibration, incoming calls, orSMSs) is triggered after five minutes, the GPS module will stop and the GSM module will enter sleep mode. Once an event is triggered, the GPS and GSM modules will be woken up. When the sleep level is 3, the tracker enters deep sleep mode. If no event (RFID, shear linevibration) is triggered after five minutes, the GPS and GSM module will stop. Once an event is triggered, the GPS and GSM modules will be woken up.
0000,A73,0 353358017784062,A73,OK

6.6.3 Setting the Maximum Working Time of the Woken GPS Module A83

SMS Sending SMS Reply Description

Password,A83,X IMEI,A83,OK X: indicates the maximum working time of the GPS module woken up by heartbeat packet. Decimal; value range: 0255; unit: minute. X = 0 (default): After the GPS module is woken up by heartbeat packet, it does not work

- 16 -

MEITRACK K211L GPS Smart Lock User Guide

Example SMS Sending SMS Reply

and the GPS is invalid.
0000,A83,1 353358017784062,A83,OK

6.6.4 Setting the SMS Time Zone B35

SMS Sending SMS Reply Description
Example SMS Sending SMS Reply

Password,B35,SMS minute IMEI,B35,OK The default time zone of the device is GMT 0. You can run the B35 command to change the time zone of an SMS report to the local time zone. The time zone of an SMS report is different from that of a GPRS data packet. When SMS minute is 0, the time zone is GMT 0. When SMS minute is a value ranging from -720 to 780, set time zones.
0000,B35,480 353358017784062,B35,OK

6.6.5 Disabling the Power-off Function of the Power Button C77

SMS Sending SMS Reply Description
Example SMS Sending SMS Reply

Password,C77,0 IMEI,C77,OK X = 1: You can turn off the device by power button. X = 0: You cannot turn off the device by power button.
0000,C77,0 353358017784062,C77,OK

6.6.6 Authorizing an RFID Card D10

SMS Sending SMS Reply Description
Example SMS Sending SMS Reply

Password,D10,RFID(1),RFID(2),...,RFID(n) IMEI,D10,OK RFID(n): indicates the authorized RFID card number. The value ranges from 1 to 4294967295. Decimal. A maximum of 50 RFID cards can be authorized at a time. Note: this command can only use super password.
666888,D10,00000001 353358017784062,D10,OK

6.6.7 Authorizing RFID Cards in Batches D11

SMS Sending SMS Reply

Password,D11,RFID card start number,n IMEI,D11,OK

- 17 -

MEITRACK K211L GPS Smart Lock User Guide

Description
Example SMS Sending SMS Reply

RFID card start number: The value ranges from 1 to 4294967295. Decimal. n: indicates the number of RFID cards to be authorized in batches. Decimal. The parameter value ranges from 1 to 128. Note: this command can only use super password.
666888,D11,00000001,128 353358017784062,D11,OK

6.6.8 Locking or Unlocking the K211L D82

SMS Sending SMS Reply Description
Example SMS Sending SMS Reply

Password,D82,X IMEI,D82, lock state When X is 0, the K211L is locked. When X is 1, the K211L is unlocked. If the command does not contain the parameter X, the lock status will be read. X = 0: Locking; X = 1: Unlocking; X = 2: Lock tampering; X = 3: Lock abnormal; X = 4: Parameter error. Note: this command can only use super password.
666888,D82,0 868998030003608,D82,OK

6.6.9 Selecting a Locking Method D83

SMS Sending SMS Reply Description
Example SMS Sending SMS Reply

Password,D83,X IMEI,D83,OK When X is 0, the K211L is locked automatically. When X is 1, the K211L is locked by swiping RFID cards. The auto locking method is selected by default. If the command does not contain the parameter X, the locking method will be read.
0000,D83,0 868998030003608,D83,OK

6.6.10 Setting the automatic authorization time of swiping the RFID card DB0

SMS Sending SMS Reply Description

Password,DB0,X Qcom DB0,OK X: ranges from 1 to 10000. DecimalUnit: seconds Within the automatic authorization period of swiping the card, swiping any RFID card will be automatically authorized, after the end of the automatic authorization period, the working state will be back to normal. Send command withot parameter means reading the remaining time.

- 18 -

MEITRACK K211L GPS Smart Lock User Guide

Example SMS Sending SMS Reply

Note: this command can only use super password.
666888,DB0,10 868998030003608,DB0,OK

6.6.11 Changing Super Password F22

SMS Sending

AAAAAA,F22,BBBBBB

SMS Reply

IME,F22,OK

Description

Need to enter super password before setting IP and port in MM.

Super passwords support all SMS commands. But A21/D10/D11/D14/D15/D82/DB0/F22

commands only support super password, not SMS password.

The default super password is 666888. The length is 6 digits.

AAAAAA is the original super password, BBBBBB is the new password

Note:

this command can only use super password.

Please make sure to remember the super password, and the super password cannot be

quested and reset to the original value, once you forget the password, it will not be able

to recover.

Example

SMS Sending

666888,F22,OK

SMS Reply

868998030003608,F22,OK

Note: For details about SMS commands, see the MEITRACK SMS Protocol.

7 Using the Platform

7.1 MS03 Tracking System
Visit http://ms03.trackingmate.com, enter the user name and password, and log in to the MS03. (Purchase the login account from your provider.) For more information about how to add a device, see the MEITRACK GPS Tracking System MS03 User Guide (chapter 4 "Getting Started"). The MS03 supports the following functions: Track by time interval or distance. Query historical trips. Set polygonal geo-fences. Bind driver and vehicle information. View various reports. Send commands in batches. Support OTA updates. For details, see the MEITRACK GPS Tracking System MS03 User Guide.
7.2 Authorizing RFID Cards in Batches by MS03
1. On the main interface of the MS03, choose Management.

- 19 -

MEITRACK K211L GPS Smart Lock User Guide
2. On the Management window that is displayed, select Sending command from Use Normal. 3. On the Sending command window that is displayed, set Command to Authorize RFID cards in batches, enter the RFID card start number and the number of cards, and click Send command. If only one RFID card needs to be authorized, the number of cards is 1. After the RFID cards are authorized successfully, you can swipe these cards to unlock and lock the K211L and record operator information.

- 20 -

MEITRACK K211L GPS Smart Lock User Guide
8 Device Installation

If you have any questions, do not hesitate to email us at info@meitrack.com.

- 21 -

References

Adobe PDF Library 11.0