Assembly Instruction: Coffee Table
Safety Warnings
WARNING: To avoid serious personal injury:
- Carefully and strictly follow assembly instructions. Improper assembly of furniture can result in structural failure, instability of the product, or tip-over.
- Monitor and carefully control the assembly components. These include small parts and hardware that may present a choking hazard to small children.
- Bob's furniture should be assembled only by responsible adults and children should not be involved in the assembly process.
- Where provided, wall mounting hardware should always be used as prescribed in these instructions to anchor furniture to walls. Proper use of the wall mounting hardware can significantly reduce the potential for furniture tip-over and crushing injuries.
Parts List
| No. | Part Desc | Qty |
|---|---|---|
| A | COFFEE TABLE OVAL TOP FRAME | 1 |
| B | COFFEE TABLE CENTER LEG | 1 |
| C | COFFEE TABLE SIDE LEG | 2 |
| D | COFFEE TABLE GLASS TOP | 1 |
Hardware List
| No. | Hardware Desc | Qty |
|---|---|---|
| 1 | ALLEN BOLT (1/4" x 1-3/4") | 2 |
| 2 | SPRING WASHER(1/4") | 2 |
| 3 | FLAT WASHER (1/4" x 5/8") | 2 |
| 4 | BRACKET (4"x1-3/16" x 1/8") | 4 |
| 5 | ALLEN BOLT (1/4" x -3/4") | 12 |
| 6 | WOOD DOWELS (Ø8 x1-3/16") | 4 |
| 7 | ALLEN KEY(M4) | 1 |
Assembly Steps
Note: Only tighten all bolts when all bolts are aligned with bolt inserts.
Step 1
Attach two side legs (C) to the oval top frame (A) using bolts (1), spring washers (2), flat washers (3), and wood dowels (6). Use the Allen key (7) for tightening.
Visual: Shows part A, two parts C, bolts, washers, and dowels being assembled.
Step 2
Attach the center leg (B) to the underside of the oval top frame (A) assembly using bolts (1), spring washers (2), flat washers (3), and wood dowels (6). Use the Allen key (7) for tightening.
Visual: Shows the partially assembled frame from Step 1, with part B being attached using bolts, washers, and dowels.
Step 3
Attach brackets (4) to the central leg assembly (B) using Allen bolts (5) and flat washers (3). Use the Allen key (7) for tightening.
Visual: Illustrates the attachment of brackets (4) to the central leg assembly (B) using bolts (5) and washers (3).
Step 4
Carefully place the glass top (D) onto the assembled base structure.
Visual: Shows the fully assembled base structure and the glass top (D) being placed on top.
Completed
The coffee table assembly is now complete.








