REDTIGER F8 User Manual

Notice

• Please read this manual carefully before operation and keep it for future reference. It will be helpful should you encounter any operational problem.
• Improper installation will void the manufacturer's warranty. The installation instructions do not apply to all types of vehicles and are written as guidelines to assist in installing the system.
• Consult an experienced technician if you are not comfortable installing the product.
• Please make sure to read and understand local laws and regulations regarding cameras and their use in a vehicle. Laws vary by state.
• Do not obscure the view of the road ahead or impede the deployment of any airbags in the event of an accident.
• When not in use, please disconnect the car adapter from both the 12/24V DC outlet in your vehicle and the device itself.
• Only clean the device with a soft dry cloth, for tough dirt, apply some neutral detergent diluted in 5 to 6 parts water on a soft cloth.
• Note that alcohol, thinner, benzene, etc could cause damage to the paint or coatings.
• Avoid making contact with the lens as this may cause damage.
• The video recordings made by this Digital Video Recorder are intended for personal use only.
• While driving, do not adjust the controls of your device as this is a distraction to driving.

Product Specifications

Note: If you have any problems during use, Red Tiger will provide 18 months free replacement and lifetime technical support. *The specific warranty period is subject to local laws.

Extended Warranty Service: After registering information on redtigercam.com, you may extend the warranty for an additional 6 months free of charge. URL: https://www.redtigercam.com/pages/warranty-form

Package Contents

• F8 4K Dash cam
• GPS Mount
• Power Supply Cable with Car Charger
• Electrostatic Sticker *2
• Cable Clips*5
• Adhesive
• User Manual
• Tool

Appearance

The dash cam has the following components:

• 1 Adhesive: Used for mounting the dash cam.
• 2 USB Type-C Port: For power connection.
• 3 Rear Cam Slot: For connecting an optional rear camera.
• 4 Front Camera Lens: Captures the road ahead.
• 5 Power Button: Turns the device on/off or switches screens.
• 6 Memory Card Slot: For inserting a microSD card.
• 7 Status Light: Indicates power status (Blue: power on, Red flashing: recording).
• 8 Up Button: Navigates menus or locks files.
• 9 Menu Button: Accesses the main menu or confirms selections.
• 10 Down Button: Navigates menus or stops recording.
• 11 GPS Mount: Attaches the dash cam to the windshield and receives GPS signals.
• 12 Touch Screen: For interacting with the device interface.
• 13 Reset Button: Resets the device to factory settings.

Buttons and Functions

Power Button

• Recording Mode: Short press to switch screen; Long press to turn off the camera.
• Setup Mode: Short press to return to the previous screen.
• Playback Mode: Short press to return to the previous screen.

Menu Button [☰]

• Recording Mode: Short press to enter the main menu.
• Setup Mode: Short press to enter/confirm specific settings.
• Playback Mode: Short press to select and play a specific file; Long press to delete/lock/unlock the specific file.

Up Button [⬆️]

• Recording Mode: Short press to lock/unlock the recording file; Long press to turn on or off Wi-Fi.
• Setup Mode: Short press to select the previous function.
• Playback Mode: Short press to select the previous file; Short press to fast rewind while video is being played.

Down Button [⬇️]

• Recording Mode: Short press to take a snapshot; Long press to stop recording.
• Setup Mode: Short press to select the next function.
• Playback Mode: Short press to select the next file; Short press to fast forward while video is being played.

Touch Screen Function

Video Mode

Swipe the screen left or right to switch between the front camera view and the screensaver.

You can manually lock the video by clicking the [?] icon in the upper right corner of the screen. A small white lock icon will appear in the middle of the screen.

You can manually click the [?] icon at the top of the screen to choose whether to record audio during video recording.

You can manually click the [?] icon at the top of the screen to choose whether to turn on Wi-Fi.

You can manually click the [?] icon at the top of the screen to choose whether to turn on the key sound.

You can click the [?] icon in the lower right corner of the screen to take a photo.

Playback Mode

Swipe up and down on the playback interface to turn pages. You can click the [⬆️⬇️] icon to turn the page.

You can click on any video to play it back.

Setting Mode

Swipe up and down on the menu interface to turn pages. Click the icons to select them in order in the menu interface. Click on any function icon to touch the screen.

User Interface Overview

Recording Mode

Function Overview

Short press the Menu [☰] button to enter the settings menu, where you can adjust various functions and parameters of the entire machine.

Note:

• In order to a Clean, Smooth, Comfortable using experience, we suggest you format your Memory Card once a month.
• When you turn off Click Tone, the startup and shutdown sounds will also be turned off.

APP and Wi-Fi Function

How to connect Wi-Fi?

1. Download the APP
   You can download the APP from:
   Official website: https://www.redtigercam.com/pages/app
   You may also use your smartphone to scan the QR Code from your dash cam or on the right side. [QR Code for APP Download]
   Apple APP Store or Google Play Store search "Redtiger".
2. Connect to Wi-Fi: Turn on the Wi-Fi on the dash cam. The Wi-Fi name (SSID) and password will appear on the screen.
3. Open Redtiger APP: Navigate to the Wi-Fi connection interface according to the steps, find the Wi-Fi of the dash cam, and enter the password to connect. (The default password is 12345678).
4. Use the APP: After successfully connecting to Wi-Fi, return to the APP to use its features.

View/Download/Delete/Share Video

1. Click the [Gallery] icon on the main interface to view video and picture files.
2. Long press the video file and select it, then choose to download or delete.
3. Return to the APP home page and select the Album, then Open and watch/share it.

App home

The Red Tiger app displays the following information:

• 1 Native Wi-Fi Name: The name of the dash cam's Wi-Fi network.
• 2 Turn on/off recorded sound: Control audio recording with the [?] icon.
• 3 GPS information: Displays GPS data like speed and coordinates with the [?] icon.
• 4 Video play window: Shows the live or recorded video feed.
• 5 Mirror Flip: Toggle the view with the [↔️] icon.
• 6 Rotate the video screen left and right: Change screen orientation with the [?] icon.
• 7 Map: View the route on a map with the [?️] icon.
• 8 Dash cam file: Access dash cam files with the [?] icon.
• 9 Pause/start recording: Control recording with the [▶️]/[⏸️] icon.
• 10 Take pictures: Capture a still image with the [?] icon.
• 11 Dash cam settings: Access device settings with the [⚙️] icon.

OTA (Over-the-air) Update

Note: Please update the Redtiger APP to the latest version to use this function.

1. Disconnect the mobile phone and dash cam Wi-Fi. Connect the phone to LAN for 5 seconds, then disconnect. Finally, connect the dash cam Wi-Fi.
2. Once Wi-Fi connection is successful, open the Redtiger APP to start using it. If new software is detected, the APP page will indicate the availability of an update.
3. To upgrade, click on "Upgrade Now". The Redtiger APP will prompt you to download the upgrade package. Please note that the actual firmware should prevail over the upgrade package.
4. Connect the dash cam to send the upgrade package. Do not power off the dash cam during the upgrade process. Once the upgrade is completed, the APP will display the upgrade success message, and the dash cam will automatically restart.

How to Play Using a Computer

Red Tiger recommends using the REDTIGER Player software for watching/playing videos and viewing Google Maps. You can download it for free on Mac or Windows from the following link: https://www.redtigercam.com/pages/gps-player

You can choose different playback modes in Settings > Video playback mode. You can also set playback speed, language, map, and other functions.

The REDTIGER Player interface includes:

• 1 Video play window (Front): Displays the video footage.
• 2 Map and track display: Shows the route and location on a map.
• 3 Play control panel: Controls for playback (play, pause, volume, etc.).
• 4 Speed and driving state indication: Displays speed and other driving data.
• 5 Play list: Lists available video files.

Note: When you find the desired video file, hold down the left mouse button and drag and drop it onto the video player to play it.

Installation

WARNING: Please make sure to connect all cameras and wires before powering on the cam screen, otherwise, the camera cannot work properly. Please follow the instructions below for the first-time installation of the Red Tiger dash cam.

Insert Memory Card

Insert the Memory Card into the dash cam, taking care that the gold contacts are facing towards the screen of the dash cam. Push the memory card until it clicks into the slot.

Front camera installation

Peel off the electrostatic sticker on the cellophane and transfer it to where you want to stick it. Attach the front camera to the electrostatic sticker and press to make it firmer.

Wire Layout In The Vehicle

1. The car charger is connected to the cigar socket.
2. Connect the other end of the car charger to the dash cam.
3. Use the crowbar to run the power cable along the front windshield and the roof, and hide the cable down the A-pillar so as not to block the driver's sight and cause danger. [Diagram showing wire routing along A-pillar]

Trouble Shooting

Why is there no GPS signal?

1. Clean and reconnect the probe on the main unit and bracket. Check for any interference in your car, like metal film on the windshield, radio antenna, or radar detector.
2. Move your car to an open area.
3. If the GPS icon is ✅, it means the GPS signal is good. If the GPS icon is ?, it means that the GPS signal is being received. If the GPS icon is ❌, it means there is no GPS signal.

How to turn off the on/off music of dash cam?

1. Click the system sound icon [?] on the screen to turn off the camera sound.
2. Please go to Settings > Click Tone > Off. When the click tone is turned off, the power on and off music will also be turned off.

Why does my dash cam prompt card error or please format Memory Card every once in a while?

Please follow the steps below to check:

1. Please go to Settings > Format Reminder to check whether the regular format reminder is enabled.
2. Format the Memory Card.
3. Restore factory settings and restart the dash cam.
4. Update the firmware.

Dash cam repeated restart/no boot?

1. Make sure you are using the original car charger.
2. Unplug the Memory Card and car charger in turn, and reinstall them. Check whether the short circuit is caused by accessories.
3. Reset the machine through the small hole at the bottom of the driving recorder.
4. If none of the above can solve the problem, please try to power on the USB cable to confirm whether the host can be used normally.
5. Please go to the official website to update the firmware.
6. If it is not resolved, please contact your dedicated customer service for a replacement.

Why "Mass storage" appears on the screen?

"Mass storage" happens when you use a USB cable with data transfer mode causing the dash cam to enter transfer mode. In this mode, data can only be transferred; no other functions work. For best results, use the original car charger or a USB cable without data transfer mode.

Why can't I connect to Wi-Fi?

1. Check the working distance of Wi-Fi, about 15ft.
2. Check the SSID and password of the Wi-Fi, or whether there are other devices connected to the Wi-Fi.
3. Turn off mobile data, security software, and VPN on your phone.
4. If the issue persists, please contact customer support for assistance.

Why is the time setting incorrect?

The dash cam features built-in GPS. It automatically adjusts time based on your location and time zone, eliminating the need for manual time changes. You can adjust the time through Settings > Time Zone/DST.

Customer Service Center

If you have any problems using or installing the dash cam, please contact Red Tiger with any questions.

• Help Center: [QR Code for Help Center]
• WhatsApp: [QR Code for WhatsApp]

For more information:

• After sales: help@redtigercam.com
• Business Cooperation: contact@redtigercam.com
• Customer Phone Service: +1 888 966 8028 (US)

Check us out here. Product and service are the foundation of Red Tiger.

• Instagram: @redtiger_dashcam
• Facebook: Redtiger Dash Cam

Website: www.redtigercam.com