User Guide for DRACAST models including: DRBRP3500D, LED Studio Light

SK-D3000SL(中性)中英文说明书1

LED Studio Light User Guide - CVP.com

LED Studio Light User Guide. DRBRP3500D. 1. Please do not expose the device to excess heat or moisture. Store in a cool, dry place.

prieš 2 dienas — LED Studio Light User Guide. DRBRP3500D. 1. Please do not expose the device to excess heat or moisture. Store in a cool, dry place.

PDF preview unavailable. Download the PDF instead.

dracast-boltray-plus-led3500-day-instructions-v1
DRBR3500D
Warning and Notes
1. Please do not expose the device to excess heat or moisture. Store in a cool, dry place. 2. Please do not let the device be exposed to rain or other liquids to avoid permanent damage. 3. Please do not connect the fixture to excess or incorrect voltage. 4. The body will generate heat when operating. Use caution when handling. 5. During transportation and installation, do not hit the fixture against other items or drop the
fixture. This can cause damage to the light. 6. Please do not directly look at the LED light when the fixture is powered on. 7. Please do not place the fixture near any flammable materials or solvents. 8. Please use a dry, soft cloth to clean fixture. The fixture may be cleaned with damp cloth only
when the unit is powered off and unplugged. Dry the fixture with a soft cloth before plugging back in. 9. Keep the fixture out of reach of children. 10. Please do not operate the fixture over-current. Permanent damage can occur. 11. Do not disassemble the fixture or touch the product's internal parts. This could result in injury and permanent damage to the fixture. In the event of a malfunction, the fixture should be repaired by a qualified technician. 12. Unplug the fixture when not in use. 13. Failure to comply with these warning can result in injury and / or cause permanent damage to the fixture.

DRBR3500D
LED Studio Light User Guide
DRBRP3500D

Note:The technical date are subject to change without notice.

DRBR3500D

Product Information

Dracast Boltray Series is a high-output, compact light fixture that combines accurate color rendition with portable design. The result is a light fixture that is perfectly suited for photo and filmmaking applications. The 3500 model is equipped with a 350W LED COB array in single color 5600K The Dracast Boltray Series is constructed with an aluminum alloy frame, making the fixture both durable and lightweight. The lamp head is separated from the power and control assembly giving the lamp head maximum versatility. The fixture can be powered via AC mains power, or via DC battery power through its onboard v-mount battery plates. The fixture is equipped with overheating protection as well as onboard fans for prolonged use. Boltray fixtures are equipped with a built-in 2.4G wireless receiver enabling it to be controlled via remote.
Specifications

Model Output Power Color rendering index Luminous Flux LED Quantity Color Temperature Illuminant Adjusting Range Remote Control Remote Control distance
Lithium Battery Type
DMX512 dimmer power input

DRBRP3500D 350W 95 31500LM 1 PCS 5600K ± 200K High-Power LED Module 10%-100% (99channel 2.4G wireless remote control)
50M Sony type V lock battery x 2 pcs, the output power of single battery 180 Watts YES (RJ45 interface)
AC100-240V 50/60Hz

Overheating Protection:
A thermally triggered overheat protection system will automatically shutdown the fixture if internal temperure exceeds 90°C (194°F). The fixture will emit an audible warning prior to shutdown. Normal operation may resume upon completed cooldown.

Boltray Figure and Components

DRBR3500D

 COB LED

 Bowens mounting





 Angle adjusting knob

 Power socket





 Yoke

 Handle



 Silent fan

5IFGBOXJMMCFPOBMMUIFUJNFBTUIFMJHIUJTPO

 Angle adjusting knob
 DMX socket 
 connection line socket



 Power cord socket

 Power switch

: AC : DC



 Sony type V lock battery

 Channel keys

 DMX switch

 FUN Button ­ 5 modes switch

 F1- Paparazzi F2- Firework F3- Warning





F4 ­ Thunder F5 ­ TV



Shortly press the FUN button to enter into F1-F5 modes of special



effect. Switch sequentially from F1 to F5 by pressing the button.



Wheel the dimmer to change the brightness intensity from 10% to 100%.





Pressing the dimmer then, and wheel to change the special effect from weak to strong (1  10 ).





 LED display

 Adjustment knob


Adobe Illustrator CS6 (Windows) Adobe PDF library 10.01