KOHLER Kitchen and Bathroom
KOHLER Kitchen and Bathroom
Owner's Manual for KOHLER models including: K-4991-ER Bardon High Efficiency Urinal, K-4991-ER, Bardon High Efficiency Urinal, High Efficiency Urinal, Efficiency Urinal, Urinal
File Info : application/pdf, 2 Pages, 160.37KB
DocumentDocumentFeatures · Washout urinal · 3/4" (19 mm) rear spud · 0.125 - 1.0 gpf (0.47 - 3.8 lpf) · Will replace K-4904-ER Material · Vitreous china Installation · 14" (356 mm) extended rim Recommended Products/Accessories K-23726 Drain treatment K-23725 Cast iron cleaner K-4929 Waterless Urinal Maintenance Balls BardonTM High-Efficiency Urinal K-4991-ER Codes/Standards ASME A112.19.2/CSA B45.1 DOE - Energy Policy Act 1992 EPA WaterSense® California Energy Commission (CEC) ADA ICC/ANSI A117.1 CSA B651 IAPMO Certification KOHLER® One-Year Limited Warranty See website for detailed warranty information. Available Colors/Finishes Color tiles intended for reference only. Color Code Description 0 White 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada 6-13-2024 20:25 - US BardonTM High-Efficiency Urinal K-4991-ER 3/4" Spud 20-3/4" (527 mm) 2" NPT Tap 19" (483 mm) 26-7/8" (683 mm) 18" (457 mm) 12" (305 mm) Wall Hangers 40-1/2" (1029 mm) To Floor 21" (533 mm) Standard Installation 13" (330 mm) Max ADA, CSA B651 Installation 14-1/8" (359 mm) 24" (610 mm) Standard Installation 17" (432 mm) Max ADA Installation 16-7/8" (429 mm) Max CSA B651 Installation 2" NPT Tap 1/4" (6 mm) 6" (152 mm) Floor Outlet Detail Technical Information All product dimensions are nominal. Spud size: 3/4", Inlet, Rear Min. Water per 0.125 gpf (0.5 lpf) Flush: Max. Water per 1 gpf (3.8 lpf) Flush: Designed for the above water use when installed with a water-saving flushometer. Notes Install this product according to the installation guide. Refer to manufacturer's instructions and local codes for flushometer requirements. Recommended ADA outlet spud height will account for normal product variation. For ADA compliance, measurement must be 17" (432 mm) or less from the floor to the top of the lip. For CSA B651 compliance, measurement must be 16-7/8" (429 mm) or less from the floor to the top of the lip. ADA, CSA B651 compliant when installed to the specific requirements of these regulations. 1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada 6-13-2024 20:25 - US