Instruction Manual for Razor models including: Power A2 Electric Scooter, Power A2, Electric Scooter, Scooter

Kickstand Replacement Instructions

Power A2 Electric Scooter - Support - Razor

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 1 Pages, 362.67KB

Required Tool: (Not included) A. 3 mm Allen wrench

POWER A2 KICKSTAND REPLACEMENT PROCEDURES
PART # W13110002028

WARNING
CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect charger before conducting any assembly or maintenance procedures. Failure to follow these steps in the correct order may cause irreparable damage.

Step 1
Using a 3 mm Allen wrench, loosen and remove the two (2) bolts that hold the kickstand onto the frame. Remove kickstand.

Step 2
Reverse the steps. ATTENTION: Charge battery 8 hours before using.

Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time. 1



References