Samsung QN65QN8/QN9 Series TV Wall Mount Quick Setup Guide
Introduction
This guide provides instructions for installing your Samsung TV using a wall mount. It details the placement of the One Connect Box and the necessary components for a secure installation.
When installing the TV as a wall mount, you can place the One Connect Box as shown below. To install using a wall mount, be sure to use the supplied HOLDER-WALL RING.
Required Components:
- HOLDER-BOLT x 3 [holder bolt] (Boulon de support x 3)
- HOLDER-WALL RING x 4 [holder wall ring] (Anneau de support mural x 4)
Model Specifications and Dimensions
The following tables provide dimensions and weight for the QN65QN8**A and QN65QN9**A models.
| Model | A (inches) | B (inches) | C (inches) | D (inches) | E (inches) | F (lbs) | G (lbs) | H (inches) |
|---|---|---|---|---|---|---|---|---|
| (mm) | (mm) | (mm) | (mm) | (mm) | (kg) | (kg) | (kg) | |
| QN65QN8**A | 56.8 (1443.7) |
32.6 (828.4) |
0.7 (16.9) |
35.3 (897.4) |
11.8 (300.6) |
50.0 (22.7) |
67.9 (30.8) |
64.5 |
| QN65QN9**A | 56.4 (1433.1) |
32.3 (819.9) |
0.6 (15.2) |
35.1 (892.0) |
11.8 (300.5) |
48.7 (22.1) |
66.4 (30.1) |
64.5 |
Note: Labels A-H refer to specific points or dimensions indicated in the diagram. 'H' represents screen size in inches.
| Model | VESA | A (mm) | B (mm) | C (mm) | D [x4] | E (inches) | F (inches) | G (inches) |
|---|---|---|---|---|---|---|---|---|
| QN65QN8**A | 400 x 300 | 5-6 | M8 | 1.25 | 4 | 8.6 | 20.2 | 11.9 |
| QN65QN9**A | 8.4 | 20.3 | 11.8 |
Note: Labels A-G in this table refer to VESA mounting hole dimensions and screw specifications.
Installation Steps
Follow these steps to install your TV using a wall mount.
Step 1: Prepare the TV
Two people are shown carefully placing the TV face down on a soft, flat surface to prevent scratches.
Step 2: Attach Brackets to TV
Attach bracket component 'A' to the back of the TV using four [screw M4 x L12]. Repeat for bracket component 'B'.
Diagram description: Shows attaching brackets 'A' and 'B' to the TV's rear mounting points using screws.
Step 3: Attach Wall Mount Bracket to TV
Attach the main wall mount bracket (component 'C') to the back of the TV using four [screw M4 x L12]. Ensure it is securely fastened.
Diagram description: Shows attaching a larger bracket 'C' to the TV using screws.
Step 4: Attach Wall Mount Arms to Wall
Securely attach the wall mount arms (components 'D' and 'E-1') to the wall using appropriate hardware (screws are shown). Ensure the arms are level and firmly fixed to wall studs or suitable anchors.
Diagram description: Shows attaching wall-facing parts of the mount to a wall.
Step 5: Connect One Connect Box
Connect the One Connect Box to the TV using the provided cable. The diagram shows the One Connect Box being connected to the TV's rear port.
Diagram description: Shows the One Connect Box and its connection cable.
Step 6: Mount TV onto Wall Bracket
With assistance, carefully lift the TV and align the brackets on the TV with the arms mounted on the wall. Slide the TV into place until it clicks or locks securely.
Diagram description: Shows two people lifting the TV and attaching it to the wall-mounted bracket.
Step 7: Final Connections and Setup
Connect power and other necessary cables (HDMI, LAN, etc.) to the One Connect Box. The diagram shows the One Connect Box connected to power and other devices, and the TV powered on.
Available Connection Ports on One Connect Box:
- [USB]
- [USB]
- [Optical]
- [HDMI ARC]
- [HDMI]
- [HDMI]
- [LAN]
- [ANT]
The diagram also shows a warning symbol ⚠️ for electrical safety and a power symbol ▶️ indicating the TV is ready for use. Ensure a minimum clearance of 15 cm (6 inches) around the One Connect Box for ventilation.
