User Manual for Aferiy models including: P010 800W 512Wh LiFePO4 Portable Power Station, P010 800W, 512Wh LiFePO4 Portable Power Station, LiFePO4 Portable Power Station, Portable Power Station, Power Station
[UK Direct] Aferiy P010 800W 512Wh LiFePO4 Portable Power Station Supp – Kraazi
[UK Direct] Aferiy P010 800W 512Wh LiFePO4 Portable Power Station 1* – Kraazi
File Info : application/pdf, 15 Pages, 937.84KB
DocumentDocumentPortable Power Station
User Manual
Thank you very much for purchasing 800W power station. Be sure to read this manual carefully before using the product in order to use the product correctly. This manual is needed for product after-sales service. Please keep this manual together with the invoice and other purchase certificates. In order to ensure the safety of this product during transportation, this product is only charged about 30% when it is packaged. Please recharge when you get the product. The product can be charged directly by the wall socket, please do not use extension cords and cable taps. When the product is charging, do not plug other products in the same socket.
Warning
1. Please avoid using the product near high temperature, high humidity, direct sun environment and fire place.
2.Do not disassemble or modify this product, it will cause malfunction and fire.
3. Please discard or recycle the product according to the methods prescribed by local laws.
4.Be careful not to drop the product from a high place and give the product a strong impact.
5.Keep or use the product in a place out of the reach of children.
6.Please use our company's genuine accessories. The damage caused by the use of non-genuine accessories cannot be repaired free of charge.
7.Please leave a space of about 30cm away from the side suction and exhaust ports, so as not to affect the heat dissipation of the product.
8.When not using this product, please turn off the power and unplug the power cord. Please avoid storing the product in a place exposed to direct sunlight with high temperature and humidity.
9.For long-term storage, please consume power from full power to no power once every 3 months, and then recharge to about 50%.
10.Please do not use this product and its accessory cables and connecting equipment when there is a defect.
11. Please do not store the product for a long time in extremely high and low temperature places such as in the car and in the field warehouse to avoid shortening the battery life.
Content
AC Output Parameter
Packing List
Product introduction
Display icon introduce
UPS mode
Solar panel connection
Car charging
Specifications
Battery specification
Fault resolution
Warranty Card
AC Output Parameter
Type of AC port
AC output
US/JP
100V~120V 50Hz/60Hz
CH
220V 50Hz
UK
220V~240V 50Hz/60Hz
EU
220V~240V 50Hz/60Hz
KR
220V 60Hz
Packing List
Portable Power Station
User Manual
Power Station
AC Charger
Thank you very much for purchasing 800W power station. Be sure to read this manual carefully before using the product in order to use the product correctly. This manual is needed for product after-sales service. Please keep this manual together with the invoice and other purchase certificates. In order to ensure the safety of this product during transportation, this product is only charged about 30% when it is packaged. Please recharge when you get the product. The product can be charged directly by the wall socket, please do not use extension cords and cable taps. When the product is charging, do not plug other products in the same socket.
User Manual
MC4 to XT60 Plug Charging Cable
Product introduction
This product is a 512Wh large capacity 800W high power, 1.5 hours of high-speed charging portable energy storage power supply, using high safety performance of LiFePo4 battery.
It can be used as a backup power supply in case of emergency power cut,disaster, camping and vehicles, and can also provide power for various electric tools.
800W high power, pure sine wave AC output, can be used for household appliances such as dryers, microwave ovens, refrigerators,high-power induction cookers and it can also be used for other electronic devices such as personal computers.
Through the 400W ultra-fast charging,this model can be full charged within 1.5 hours, The AC input/output voltage frequency can automatic or manually switched between 50Hz/60Hz. This product also supports maximum 200W solar charge,allow you to charge even when the power cut or in outdoor situations
1 Main power control 2 Light control 3 USB control 4 DC control 5 LCD display
6 Air intake/outlet
7 AC on/off control(50Hz/60Hz
switching control)
8 XT60 input port(for solar
panel)
9 AC input port
Main Power Control Main Control for the whole system turn on/off. Operate method: long press the button for 3s to turn on/off the
system.
LED light control
Operate method:short press to turn on and change the light mode (SOS/Flash). Notice: you can turn off the light by long press the button(-s) in any mode.
USB button
Operate method:short press to turn on/off.
USB-A QC 3.0
TYPE-C 1 PD-100W
TYPE-C 2 PD-20W
DC button Operate method:short press to turn on/off.
Output 12V/10A
Cigar Lighter 12V/10A
LCD display
Present the remaining power and using data.
Cooling system
When the fans are working, please don't block the channel.
AC button(AC output, total share W)
Operate method:short press to turn on/off.
Notice: 1.Please confirm the output voltage or frequency before using 2.Long press the button for 3s to entry the frequency changing mode, 50Hz and 60Hz will blink in the display, press again the button to chose the right frequency, wait till the frequency is not blinking, then you will get the frequency you want. 3.Quick short press for 10 times to switch the voltage.
Solar panel input
Use the included XT60MC4 conversion cable to connect the solar panel.
1.Solar panels can have a maximum input of 200W and a maximum voltage of 50V. 2.If exceeding the maximum voltage leads to equipment damage, it is beyond the
scope of warranty.
AC Input Use wall socket to get 400W fast charging, which can full charge from 0 to 100% in 1.5 hours.
The product can be charged directly by the wall socket, please do not use extension cords and cable taps. When the product is charging, do not plug other products in the same socket.
Please do not plug several devices together in a extension socket at once, the current will be to high and bring damage to the cable and fire risk.
If the extension socket is plugged in to charge this product, please do not connect other electrical appliances to this socket, otherwise the household meter may trip.
Display icon introduce
1 Charging/using time 2 Total input power 3 Battery Progress Bar 4 Power percentage
5 Total output power 6 LED light 7 AC output 8 DC output
9 Type-c output 10 USB output 11 Fan state 12 Cigar lighter output
13 XT60 charging
14 AC charging
15 High/low temperature protection
Display Attention
When this icon light up. Please keep Air intake/outlet unobstructed.
When this icon light up. Please note the device is now with high/low temperature and will possibly stop working till the temperature back to normal standard.
When this icon is blinking, represent that the AC input is fault, please recheck(Power/Hz/cable).
When the icon is blinking, represent the output is fault, please recheck.
UPS mode
UPS function This product has the bypass mode, does not need to pass through the battery, can directly output from the AC. In UPS mode, when the AC input power of the mains is cut off due to a power outage, the ac input power of the mains can be used in about automatic switch to product battery power within 10 ms to ensure AC output.
UPS Connections As shown in the figure below, connect the product between the socket on the wall and the electrical appliances, and the power of the product is in the ON state. When you turn on the power of the electrical appliances,it will directly uses the AC power of the power grid.
In this state, when the power grid is cut off, it will automatically switch to the product's internal battery to supply power.
In UPS mode of The United States and Japan, the maximum power output of AC is below 800W, and the AC output exceeds 800W.The AC output icon" "blinks indicating overload.
In UPS mode of the China, United Kingdom, Europe and South Korea , AC output of the maximum power below 800W, AC output over 800W, " " AC output icon flashes indicating overload.
TV
Solar panel connection
Our products can be connected to solar panels and can be charged through solar panels.
Solar panel charging power, according to the weather and climate conditions. Solar panel voltage exceeding 50V will damage the equipment and may not be
covered by warranty.
By solar panels
Connecting Pattern The area of charging
Device
XT port AC input
XT60 to MC4
Connecting Pattern The area of charging
Device
XT port AC input XT60 to MC4
Solar panel
Solar panel A (Not included in the accessory)
Solar panel B (Not included in the accessory)
Car charging
This product can be charged by the cigarette lighter in the car with an ACC cable (accessory: ACC hereinafter).
Turn on the power of this product, connect the ACC charging cable to the cigarette lighter in the car and the XT60 interface on the side of the product, turn on the engine of the car, and the LCD of this product will show the input power.
On-board charging should be carried out with the car engine turned on. If the engine is not turned on, the battery might run out.
Car charging is usually low power of 90-120W, and the charging time will be long. If you need quick charge, it is recommended to use the mains.
Device
XT port AC input
Car charging cable accessories (Not included in the accessory)
Specifications
Product name Product size Product weight Capacity AC Charging MPPT input
800W Portable Power station L*W*H=*.*mm 6.5kg 512Wh 50/60Hz 400W max 11.5-50V 8A 200W max
AC output
800W 50Hz/60Hz,pure sine wave
USB-A output Type-C output DC 6530 output Cigar lighter output Power off current Operating temperature Charging temperature Environment humidity
(QC . W)x (PD W)x(PD W)x V/A V/A
-
Battery specification
Battery type Single cell rated voltage Single cell rated capacity Battery pack rated voltage Battery pack output voltage Battery pack rated capacity
40135 LiFePo4
20Ah 25.6V 21V-29V 512Wh
Phenomenon
Cause
Processing method
The above output icon flashes and beeps.
The output exceeds the standard and it's short -circuited.
Remove the load, and then short press the switch in the area corresponding to the icon to remove the alarm
The temperature warning The temperature of the prod
iconflashes and beeps.
-uctis too high or too low.
Take the product out of the charging state remove all loads, turn the power off, wait for the device to reach a suitable working temperature, then the alarm is removed .
The icon of connecting to the AC mains flashes and the product cannot be charged.
The charging cable is poorly connected.
The overload protection function is enabled.
If you have any questions, please feel free to contact us. Email address: support@aferyjapan.com. Sincerely.
11
Warranty Card
Warranty Card
Model Name Address Tel Mail Name of the store Buying date
Please fill in all the above items.
This product provides a 24-month warranty service from the date of purchase If there is a quality problem within the range of normal use, we provide warranty service. After purchasing our company's products, please keep this product together with invoices and other items. When maintenance services are needed, please provide information according to our company's request. In the case where the warranty is damaged or alteredand no stamp of the sales store on the warranty, the warranty service may not be provided. Damage caused by use beyond the normal range of use is not covered by the warranty service. The content of the warranty scope shall be subject to the content recognized by the company. Even within the scope of the warranty, sometimes it will be exchanged for products with the same function. The shipping and repair fees for products outside the warranty range shall be paid by the customer. Sometimes the specifications and functions of the product will be updated without prior notice.
12