Product Compliance with Radio Equipment Directive
This certificate confirms that the DUAL BAND FM TRANSCEIVERs, specifically the Baofeng UV-82, UV-82L, and GT-5 models, have successfully completed the EU type examination procedures. The examination was conducted by PHOENIX TESTLAB, a Notified Body with number 0700, in accordance with the Radio Equipment Directive (RED) 2014/53/EU.
The devices were found to be in compliance with the essential requirements outlined in Article 3.1 a) (Health and Safety), Article 3.1 b) (Electromagnetic Compatibility), and Article 3.2 (Effective and Efficient Use of Radio Spectrum) of the directive.
Manufacturer and Product Details
Manufacturer: Fujian Baofeng Electronics Co., Ltd
Product Description: DUAL BAND FM TRANSCEIVER; with PMR, FM
Brand Name / Model Names: BAOFENG / UV-82, UV-82L; Pofung / GT-5
The certificate, with number 18-210776a, was issued on 2018-04-25 and is valid until 2023-04-24, provided the conditions specified in the attached annex are met.
Technical Specifications Overview
The examination covered various technical aspects, including frequency ranges for PMR, VHF, UHF, and FM broadcast reception. Transmit power for PMR is specified as 5W/1W. The hardware and software versions were also documented.
Key components such as the battery (BL-8, 7.4V, 2000mAh), antenna (detachable, 2.15 dBi), adapter (NLA100100W1U4S95), and charger were also part of the evaluation.
Regulatory Compliance and Standards
The document lists the applied standards and corresponding test reports, including various EN and ETSI standards related to safety, electromagnetic compatibility, and radio spectrum usage. These include:
- EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
- EN 62209-2:2010
- EN 50566:2017
- Draft ETSI EN 301 489-1 V2.2.0
- Draft ETSI EN 301 489-5 V2.2.0
- EN 55032:2015/AC:2016
- EN 61000-3-2:2014
- EN 61000-3-3:2013
- EN 55035:2017
- ETSI EN 300 086 V 2.1.2
- ETSI EN 300 219 V 2.1.1
- Final draft ETSI EN 303 345 V1.1.7
The operating temperature range is specified as -10 to 40 degrees Celsius. Restrictions for use, such as SAR with belt clip separation distance, are noted and must be detailed in the user instructions.
The manufacturer is responsible for ensuring that all manufactured units conform to the approved type and affixing the CE marking accordingly. A written EU declaration of conformity must be maintained for ten years.
For further details on the testing and compliance, refer to the full documentation provided by PHOENIX TESTLAB GmbH at www.phoenix-testlab.de.
