User Manual for AV Access models including: 4KSW41-KVM-Pro, 4x1 HDMI 2.0 KVM Switcher, 4KSW41-KVM-Pro 4x1 HDMI 2.0 KVM Switcher, HDMI 2.0 KVM Switcher, KVM Switcher, Switcher
Features 4 In 1 Out HDMI KVM switcher with HDMI2.0 and HDCP2.2 compliant. Full 18Gbps bandwidth supports 4K@60Hz 4:4 chroma sampling with 4:
2022-07-31 — 4KSW41-KVM-Pro is a 4x1 HDMI KVM Switcher with Hotkey Switch. It supports. HDMI 2.0 and HDCP 2.2 compatibility, and supports resolutions up to 4K@60Hz.
Upgraded 4x1 4K KVM Switch with Hotkey Switching, IR Rmote Control
File Info : application/pdf, 16 Pages, 571.31KB
DocumentDocument4KSW41-KVM-Pro 4x1 HDMI 2.0 KVM Switcher with Hotkey Switch User Manual Disclaimers The information in this manual has been carefully checked and is believed to be accurate. AV Access Technology Limited assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. AV Access Technology Limited assumes no responsibility for any inaccuracies that may be contained in this document. AV Access Technology Limited also makes no commitment to update or to keep current the information contained in this document. AV Access Technology Limited reserves the right to make improvements to this document and/or product at any time and without notice. Copyright Copy, Reproduce, Distribute and/or Edit of this document or part of it as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved. Copyright ©2017 AV Access Technology Limited All rights reserved. Trademarks Notice All products or service names mentioned in this document may be trademarks of the companies with which they are associated. Contact Us Email: info@avaccess.com Important Safety Instructions Do not expose this device to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the device. Do not install or place this unit in a bookcase, built-in cabinet, or in another confined space. Ensure the unit is well ventilated. To prevent risk of electric shock or fire hazard due to overheating, do not obstruct the unit's ventilation openings with newspapers, tablecloths, curtains, or similar items. Do not install near any heat sources such as radiators, heat registers, stoves, or other device (including amplifiers) that produce heat. Do not place sources of naked flames, such as lighted candles, on the unit. Clean this device only with dry cloth. Unplug this device during lightning storms or when unused for long periods of time. Protect the power cord from being walked on or pinched, particularly at plugs. Only use attachments / accessories specified by the manufacturer. Refer all servicing to qualified service personnel Table of Contents Introduction .......................................................................................................... 2 Overview .................................................................................................................................. 2 Features .................................................................................................................................... 2 Package Contents.................................................................................................................. 3 Panel .......................................................................................................................................... 3 Front Panel ..................................................................................................................... 3 Rear Panel ....................................................................................................................... 4 Application ...........................................................................................................5 Control of the Switcher ........................................................................................6 Front Panel Control ............................................................................................................... 6 IR Remote Control ................................................................................................................. 6 Hotkey Function..................................................................................................................... 8 Specifications .......................................................................................................9 Trouble Shooting................................................................................................11 Warranty .............................................................................................................12 www.avaccess.com 1 info@avaccess.com Introduction Introduction Overview 4KSW41-KVM-Pro is a 4x1 HDMI KVM Switcher with Hotkey Switch. It supports HDMI 2.0 and HDCP 2.2 compatibility, and supports resolutions up to 4K@60Hz 4:4:4 8bit. The four USB port KVM switcher allows users controls four source devices/computers with only one set of USB devices (e.g., USB mouse, USB keyboard, USB flash and other USB2.0 compliant devices). The switcher features virtual interaction function, which can reduce the switching time and does not need to frequently pull the HPD signal of the source device each time. It also supports direct switching through buttons on front panel, IR Remote switching, and hotkey switching through keyboard connected to the special USB port. It provides a wide compatibility choice for different operating systems, such as Windows, Mac OS and Linux, no driver required and simple plug and play. Features 4 In 1 Out HDMI KVM switcher with HDMI2.0 and HDCP2.2 compliant. Full 18Gbps bandwidth supports 4K@60Hz 4:4:4 chroma sampling with HDR. Supports refreshing rate up to 1080P@120Hz. One USB 1.1 port for keyboard and two USB 2.0 ports for USB devices. Supports button switch, IR remote switch, and hotkey switch (Keyboard must be connected to USB1.1 port). Supports microphone input and headphone output for audio application. Compatible with Windows 10/8/7 XP, Mac OS and Linux. No driver required, plug and play. www.avaccess.com 2 info@avaccess.com Introduction Package Contents Before you start the installation of the product, please check the package contents: Switcher x 1 Power Adapter (DC 12V 1A) with US Pins x 1 IR Remote x 1 IR Receive Cable (L=1.2m) x 1 USB 2.0 Type-B to Type-A Cable (L=1.5m) x 4 User Manual x 1 Panel Front Panel 1 2 No. Name 1 Power LED HDMI Input Selection Buttons 2 (1~4) and LEDs (1~4) 3 IR Receive Window 4 USB 3 4 56 Description On: The device is powered on. Off: The device is powered off. HDMI Input Selection Button (1~4): Press the button to select HDMI In (1~4) as input. LED: LED is located on the right of the button. On: The corresponding HDMI In is selected. Off: The corresponding HDMI In is not selected. Receive IR signal. : USB 1.1 type-A port, can be used to connect to a USB slave device (such as keyboard) for KVM www.avaccess.com 3 info@avaccess.com No. Name 5 MIC In 6 Line Out Rear Panel Introduction Description function. When connect a keyboard to it, the keyboard can be used for Hotkey function. : USB 2.0 type-A port, can be used to connect to USB 2.0 high-speed device for KVM function. Connect to a Microphone. The Microphone follows the HDMI Input source selected. Connect to an earphone. The earphone follows the HDMI Input source selected. 5 1 2 3 4 No. Name Description 1 DC 12V Connect to the power adapter provided. 2 IR Ext. Connect to the IR receive cable provided. 3 HDMI In (1~4) Connect to HDMI sources. 4 HDMI Out Connect to an HDMI display. Connect to USB Host devices. USB Host 5 (1~4) The USB Host 1~4 is bound with HDMI In 1~4 respectively. When an HDMI input is selected, the corresponding host PC will be connected to the USB devices connected to the switcher. www.avaccess.com 4 info@avaccess.com Application Application Warnings: Before wiring, disconnect the power from all devices. During wiring, connect and disconnect the cables gently. Front Panel Keyboard 4 Connect USB keyboard to USB 1.1 port on front panel and other USB devices (e.g. mouse, USB disk, etc.) to USB 2.0 ports on front panel of the switcher. Mouse MIC Removable Hard Disk Earphone 3 Connect a Microphone and an earphone to MIC IN and LINE OUT port Rear Panel 1 Connect HDMI sources (Such as PC or laptop) to HDMI IN 1~4 ports 6 Connect to the power adapter provided. PC PC PC Connect an 2 HDMI display device to HDMI OUT port 5 Connect the PCs to the USB Host port (1~4) on rear panel of the switcher. Dis pla y PC www.avaccess.com 5 info@avaccess.com Control of the Switcher Control of the Switcher You can choose to switch input sources at your convenience through front panel buttons, IR remote or Hotkey function. Front Panel Control Users can choose to use front panel buttons to do basic switching operations. Connect the switcher as required and power on all the attached devices. Press the corresponding button (Input1/2/3/4) to select HDMI In (1/2/3/4) as input source IR Remote Control The included remote handset can be used to turn on and off a CEC-enabled display device and to switch four HDMI sources to one display device. Point the remote directly at the IR windows on front panel or at the IR extension cable connected to the "IR Ext." on rear panel. www.avaccess.com 6 info@avaccess.com Turn on a CEC-enabled display device Select the previous source input Select a specific source input Control of the Switcher Turn off a CEC-enabled display device Select the next source input Button ON OFF 1 2 3 4 IR Codes 0x1D 0x1F 0x1B 0x11 0x17 0x12 0x59 0x08 Description Turn on the connected CEC-enabled display. Turn off the connected CEC-enabled display. Switch to the previous source input (Cycle 4->1). Switch to the next source input (Cycle 1->4). Switch to source input 1. Switch to source input 2. Switch to source input 3. Switch to source input 4. www.avaccess.com 7 info@avaccess.com Control of the Switcher Hotkey Function One USB 1.1 port on front panel of the switcher supports keyboard Hotkey function. Supported Hotkey: 1. Tab (default) 2. Left Ctrl 3. Right Ctrl 4. Caps Lock Key Operation Press the "Hotkey" twice quickly Press "Hotkey" +"1" Press "Hotkey" +"2" Press "Hotkey" +"3" Press "Hotkey" +"4" Press "Hotkey" + "Left" Press "Hotkey" + "Right" Function Switch to this hotkey Switch to input 1. Switch to input 2. Switch to input 3. Switch to input 4. Switch to the previous input source (Cycle 4->1). Switch to the next input source (Cycle 1->4). For example: If you want to use the "Left Ctrl" as a hotkey, press the "Left Ctrl" key twice quickly to switch the hotkey to it, and other hotkeys are invalid. If you need to use other hotkeys, please repeat the above steps. www.avaccess.com 8 info@avaccess.com Specifications Specifications Technical Video Signal Input/Output Resolution Support Audio Format Supported Max Data Rate General Operating Temperature Storage Temperature Humidity Power Consumption (Maximum) Device Dimensions (W x H x D) Product Weight HDMI with 4K@60Hz 4:4:4, HDCP 2.2 SMPTE: 1280x720P1,2,3,4,5,6,7,8, 1920x1080I6,8, 1920x1080P1,2,3,4,5,6,7,8,9, 2560x10809, 3840x10809, 3840x21602,3,5,6,8, 4096x21602,3,5,6,8 VESA: 800x6008, 1024x7688, 1280x7688, 1280x8008, 1280x9608, 1280x10248, 1360x7688, 1366x7688, 1400x10508, 1440x9008, 1600x9008, 1600x12008, 1680x10508, 1920x12008, 2560x144010 1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz, 4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = 120Hz, 10 = 144Hz HDMI: Fully supports audio formats in HDMI 2.0 specification, including PCM 2.0/5.1/7.1, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio and DTS:X MIC IN: Mono LINE OUT: Stereo 18 Gbps 0°C to + 45°C (32 to + 113 °F) -20 to +70°C (-4 to + 158 °F) 20% to 90%, non-condensing 5.27W 230mm x 26.2mm x 142.6mm/ 9.06'' x 1.03'' x 5.61'' 0.83kg/1.83lb www.avaccess.com 9 info@avaccess.com Specifications Transmission Distance Cable HDMI Range Input/Output:15m/50ft Input: 10m/33ft Output: 15m/50ft Input/Output: 5m/16ft Supported Video 1080P@60Hz 24bpp 4K@30Hz 4:4:4 24bpp 4K@60Hz 4:2:0 24bpp 4K@60Hz 4:4:4 24bpp www.avaccess.com 10 info@avaccess.com Trouble Shooting Trouble Shooting 1 Power: Please make sure all devices are powered on. (Source, switcher, display devices). 2 Indicator: Please make sure LED indicators are normal according to user manual. 3 Device: Please make sure picture can be shown normally when connecting source to display devices directly. 4 Cable: Plug in and out HDMI/USB cable or try another HDMI/USB cable. 5 Compatibility: Please test other source and display devices to determine whether it is a compatibility issue. www.avaccess.com 11 info@avaccess.com Warranty Warranty Products are backed by a limited 1-year parts and labor warranty. For the following cases AV Access Technology Limited shall charge for the service(s) claimed for the product if the product is still remediable and the warranty card becomes unenforceable or inapplicable. 1. The original serial number (specified by AV Access Technology Limited) labeled on the product has been removed, erased, replaced, defaced or is illegible. 2. The warranty has expired. 3. The defects are caused by the fact that the product is repaired, dismantled or altered by anyone that is not from an AV Access Technology Limited authorized service partner. The defects are caused by the fact that the product is used or handled improperly, roughly or not as instructed in the applicable User Guide. 4. The defects are caused by any force majeure including but not limited to accidents, fire, earthquake, lightning, tsunami and war. 5. The service, configuration and gifts promised by salesman only but not covered by normal contract. 6. AV Access Technology Limited preserves the right for interpretation of these cases above and to make changes to them at any time without notice. Thank you for choosing products from AV Access. www.avaccess.com 12 info@avaccess.com AV Access Technology Limited V1.0.5