Instruction Manual for Montech models including: MKey 105 Mechanical Keyboard, MKey 105, Mechanical Keyboard, Keyboard
Electric shock: Montech KEYBOARD is a DC 5V device, which reduces the risk of electric shock. 4. Damage to the keyboard: Proper cleaning techniques and ...
Scope of delivery (packaging content = Lieferumfang) + required tools
1. Keyboard x1 Packaging Content 2. Manual x1
3. USB A to C
Required Tools
1. Computer with Windows OS 2. USB-A Host at PC
Note on proper installation / commissioning
Ensure that the USB cable already insert into USB Host Tip: When connecting a USB keyboard, the computer can be off or on during the installation. Connect the USB keyboard plug into the USB ports on the back or front of your computer. If using a USB hub, direct connection to the back of the computer is recommended. For laptops, an external keyboard can be connected to one of the USB ports, or a USB hub may be used if no ports are available. The keyboard should be automatically detected and installed after connecting.
Advice on safe use
1. Dust, dirt, and bacteria: Computer keyboards can harbor a significant amount of bacteria and dirt. Cleaning the keyboard helps remove dangerous bacteria, prevents stuck keys, and maintains proper functionality. Procedure for cleaning: Before cleaning, turn off the computer and unplug the USB. This prevents accidental key presses that could cause undesired tasks.Use compressed air to blow away dust and debris between the key caps. A vacuum cleaner can also be used, be cautious of loose "pop off" key being sucked up.
2. No waterproof: If any liquid is spilled on the keyboard, immediately turn off the computer or disconnect the keyboard. Flip the keyboard upside down to prevent liquid from damaging the circuits, shake it over a surface that can be cleaned, and use a cloth to clean the keys. Leave the keyboard upside down for at least two days to dry before continuing to clean any remaining substances.
3. Electric shock: Montech KEYBOARD is a DC 5V device, which reduces the risk of electric shock.
4. Damage to the keyboard: Proper cleaning techniques and precautions for spills can help prevent damage to the keyboard.
6
Note on disposal Please follow the WEEE / ROHS 2012/19/EU instructions for recycling disposal. Top/Bottom Case: ABS Key Cap: PBT PCB: FRP PCB Switch Frame: Steel
manufacturer name MONTECH / TELON TECHNOLOGY CO., LTD manufacturer adress 22F., No. 63, Zhongxiao 3rd Rd., Linkou Dist., New Taipei City 244 , Taiwan Product name / code (Manufacturer partnumber) MKey87/ MKey105
7
Specification
Model name
MKey105/MKey87
Structure
Mechanical/Hot-Swappable
Switches
Gateron G pro 2.0
Keycaps material PBT
Printing Method Dye-Sublimation
Full Size(100%)
Dimension(mm):443*136*41 Weight(g):1563
TKL(80%)
Dimension(mm):363*136*41 Weight(g):1335
MKey Fn+Esc Fn+F1 Fn+F2 Fn+F3 Fn+F4 Fn+F5 Fn+F6 Fn+F7 Fn+F8 Fn+F9 Fn+F10 Fn+F11 Fn+F12 Fn+ Fn+
8
Turn of all Lighting Lighting Direction Control Lighting Effect Speed UP_3 Levels Lighting Effect Speed Down_3 Levels Turn Off the Knobs Light Previous Track Play/Pause Stop Next Track Mute Turn of Mic Calculator Boss Key! (Go back to Home page) Increase Brightness Decrease Brightness
Fn+ Fn+C Fn+
Change Lighting Color Lighting mode Windows Lock/Unlock
Fn+Shift+Esc
Long Press 3 Seconds to Reset to Factory Settings
Rotary knob control: Default: Volume control Switch mode by pressing the knob. In sequence of: Volume control, Lighting mode, Zoom in/out
Corresponding lighting to each mode: Blue and White comet: Volume control (Lighting rotates clockwise) Colorful RGB:Lighting mode (Lighting rotates clockwise) Red and White comet: Zoom mode (Lighting rotates clockwise)
Lighting can be changed by using the rotary knob or Fn+C
MACRO
Fn+Alt+0~9
Long press for 3 seconds to start recording a Macro.
Fn+Alt+End
Long press for 1 second to end the recording or continue recording other keys.
Fn+Alt+Space
Long press for 3 seconds to do a factory reset.
Fn+Alt+0-9Long press for 3 seconds to start recording a Marco. Fn+Alt+EndLong press for 1 second to end the recording or continue recording other keys. Fn+Alt+SPACELong press for 3 seconds to do a factory reset.
Switch hot keys after finishing Macro recording Switch to Profile 0 Switch to Profile 1 Switch to Profile 2 Switch to Profile 3........ Programmable Macro keys
9
+ )Lieferumfang = (
x1 .1 x1 .2
USB A to C .3
:
Windows .1 USB-A Host .2
:
/
USB USB ,USB :
USB . . USB . ,USB , . USB ,USB
.
: , , .1 .
. , , .USB , : . , .
." " , : .2 . , . ,
. 5 Montech : .3
. ,
10
iLovePDF