WEN 56035T Plate Compactor - Exploded Views and Parts Lists

Vibrator Assembly

The following tables and diagrams detail the components of the vibrator assembly. Note that these parts are available as a complete assembly (part number 56035-023). For purchase inquiries, visit www.wenproducts.com.

Vibrator Assembly Diagram

The vibrator assembly consists of various parts labeled with numbers. Key components include:

Eccentric Block
Oil Seal
Bearing Cover
Bearing
Bearing Seat
Key
Main Shaft
Inner Hexagon Bolt
Spring Gasket
Clip
Pulley
Conical Flat Gasket

Vibrator Assembly Parts List

No.	Part Number	Description	Specification	Qty.
1	56035-G-001	Eccentric Block		2
2	56035-G-002	Oil Seal	28 x 50 x 10	2
3	56035-G-003	Bearing Cover		2
4	56035-G-004	Bearing	6306	2
5	56035-G-005	Bearing Seat		1
6	56035-G-006	Key	6 x 6 x 20	3
7	56035-G-007	Main Shaft		1
8	56035-G-008	Inner Hexagon Bolt	M6 x 16	6
9	56035-G-009	Spring Gasket	Ø6	6
10	56035-G-010	Clip	Ø24	2
11	56035-G-011	Pulley	84 x 35	1
12	56035-G-012	Conical Flat Gasket	8 x 30 x 6	1
13	56035-G-013	Spring Gasket	Ø8	1
14	56035-G-014	Inner Hexagon Bolt	M8 x 20	1

Plate Compactor Components

The following sections detail the parts for the main plate compactor unit and its engine.

Plate Compactor Main Assembly

The main plate compactor assembly includes the following components:

Engine
Key
Pulley
Washer
Spring Washer
Hex Bolt
Washer
Handle Fixed Plate
Handle Rubber Damper
Locked Nut
Lower Handle
Locked Pin Assembly
Upper Handle
Throttle Line Assembly
Locked Nut
Flange Bolt
Handle Damper
Washer
Belt Cover
Washer
Bolt
Bottom Plate
Engine Support Plate
Locked Nut
Washer
Shock Absorber
Washer
Spring Washer
Nut
Locked Nut
Hex Bolt
Washer
Hex Bolt
Hex Bolt
Press Plate
Exciter Seat
Vibrator Assembly
Spring & Flat Washer
Nut
Belt
Hex Bolt
Spring Washer
Flat Washer
Nut
Hex Bolt
Hex Bolt
Frame
Washer

Plate Compactor Parts List

No.	Part Number	Description	Specification	Qty.
1	56035-E-000	Engine		1
2	56035-147	Key	5*40	1
3	56035-020	Pulley		1
4	56035-019	Washer	M8×30×6	1
5	56035-018	Spring Washer	Ø8	5
6	56035-017	Hex Bolt	M8*30	1
7	56035-005-3	Washer	Ø 10	6
8	56035-048	Handle Fixed Plate		2
9	56035-049	Handle Rubber Damper		4
10	56035-050	Locked Nut	M12	2
11	56035-005L	Lower handle		2
12	56035-051	Locked Pin Assembly	M10*35	2
13	56035-005H	Upper handle		1
14	56035-046	Throttle Line Assembly		1
15	56035-005-2	Locked Nut	M10	2
16	56035-005-6	Flange Bolt	M10*35	2
17	56035-005-7	Handle Damper		2
18	56035-005-4	Washer	Ø10	14
20	56035-015	Belt Cover		1
21	56035-014	Washer	Ø8*24	2
22	56035-012	Bolt	M8*20	2
23	56035-030	Bottom Plate		1
24	56035-031-1	Engine Support Plate		1
25	56035-035	Locked Nut	M12	4
26	56035-003	Washer	12*35	4
27	56035-032	Shock Absorber		4
28	56035-028	Washer	Ø12	4
29	56035-027	Spring Washer	Ø12	4
30	56035-026	Nut	M12	4
31	56035-052	Locked Nut	M8	4
32	56035-005-8	Hex Bolt	M10*65	2
33	56035-009	Washer	Ø8	4
34	56035-053	Hex Bolt	M8*45	2
35	56035-024	Hex Bolt	M18*140	2
36	56035-025	Press Plate		1
37	56035-031-2	Exciter Seat		1
38	56035-023	Vibrator Assembly		1
39	56035-022	Spring & Flat Washer	Ø18	2
40	56035-021	Nut	M18	2
41	56035-016	Belt	B-787	1
42	56035-038	Hex Bolt	M12*35	8
43	56035-037	Spring Washer	Ø12	8
44	56035-036	Flat Washer	Ø12	8
45	56035-043	Nut	M8	2
46	56035-042	Hex Bolt	M8*50	2
47	56035-002	Hex Bolt	M10*30	1
49	56035-001	Frame		1
50	56035-054	Washer	Ø18	2

Engine Components (Model 56035-E-000)

The engine is available as a single assembly under model number 56035-E-000. The following diagrams and lists detail its parts.

Cylinder Head Assembly

No.	Part	Description	Qty.
Fig. 1 - 1	56035-E-001	Cylinder Head Gasket	1
Fig. 1 - 2	P54066	Cylinder Head Cover Assembly	1
Fig. 1 - 3	P54064	Cylinder Head Cover Gasket	1
Fig. 1 - 4	56035-E-004	Breather Tube	1
Fig. 1 - 5	P54040	Bolt	4
Fig. 1 - 6	56035-E-006	Stud	2
Fig. 1 - 7	P54058	Stud	2
Fig. 1 - 8	P54048	Pin	2
Fig. 1 - 9	P54062	Cylinder Head Bolt	4
Fig. 1 - 10	P54060	Spark Plug	1
Fig. 1 - 11	P54054	Cylinder Head Subassembly	1

Crankcase Assembly

No.	Part	Description	Qty.
Fig. 2 - 1	56035-E-012	Crankcase Subassembly	1
Fig. 2 - 2	P54020	Engine Oil Sensor	1
Fig. 2 - 3	P54031	Governor Gear Assembly	1
Fig. 2 - 4	P54014	Governor Arm	1
Fig. 2 - 5	56035-E-016	Drain Plug Bolt	2
Fig. 2 - 6	P54002	Washer	2
Fig. 2 - 7	56035-E-018	Bearing	1
Fig. 2 - 8	P54008	Oil Seal	1
Fig. 2 - 9	P54003	Nut	1
Fig. 2 - 10	56035-E-020	Washer	1
Fig. 2 - 11	56035-E-021	Pin	1
Fig. 2 - 12	56035-E-022	Bolt	2
Fig. 2 - 13	56035-E-100	Oil Drain Tube	1
Fig. 2 - 14	56035-E-101	Seal Guide	1

Crankcase Cover Assembly

No.	Part	Description	Qty.
Fig. 3 - 1	56035-E-023	Crankcase Cover	1
Fig. 3 - 2	56035-E-018	Bearing	1
Fig. 3 - 3	P54008	Oil Seal	1
Fig. 3 - 4	P54080	Crankcase Gasket	1
Fig. 3 - 5	P54082	Pin	2
Fig. 3 - 6	P54086	Oil Dipstick Subassembly	1
Fig. 3 - 8	56035-E-029	Engine Oil Plug Subassembly	1
Fig. 3 - 9	P54092	Bolt	6

Crankshaft

No.	Part	Description	Qty.
Fig. 4 - 1	56035-E-031	Crankshaft Assembly	1

Piston Ring/Connecting Rod

No.	Part	Description	Qty.
Fig. 5 - 1	P54105	Piston Ring Assembly	1
Fig. 5 - 2	P54106	Piston Ring Clip	2
Fig. 5 - 3	P54109	Piston	1
Fig. 5 - 4	P54112	Piston Pin	1
Fig. 5 - 5	P54121	Connecting Rod	1

Valve/Camshaft

No.	Part	Description	Qty.
Fig. 6 - 1	P54146	Camshaft Assembly	1
Fig. 6 - 3	P54150	Valve	1
Fig. 6 - 5	56035-E-043	Valve Spring Seat	2
Fig. 6 - 6	P54160	Valve Lock Clamp	4
Fig. 6 - 7	P54154	Valve Spring	2
Fig. 6 - 8	P54161	Seal Guide	1
Fig. 6 - 9	P54142	Valve Tappet	2
Fig. 6 - 10	P54140	Valve Lifter	2
Fig. 6 - 11	P54138	Stopper Plate Subassembly	1
Fig. 6 - 12	P54134	Valve Adjusting Bolt	2

Recoil Starter

No.	Part	Description	Qty.
Fig. 7 - 1	56035-E-054	Recoil Starter Assembly	1
Fig. 7 - 2	P54598	Bolt	3

Valve Components

No.	Part	Description	Qty.
Fig. 6 - 13	P54132	Valve Rocker	2
Fig. 6 - 14	P54130	Valve Adjusting Nut	2
Fig. 6 - 15	P54128	Valve Lock Nut	2

Shroud

No.	Part	Description	Qty.
Fig. 8 - 1	P54668	Shroud	1
Fig. 8 - 2	56035-E-058	Cylinder Body Shroud	1
Fig. 8 - 3	56035-E-059	Lower Shield	1
Fig. 8 - 4	P54612	Oil Protector	1
Fig. 8 - 5	56035-E-061	Stop Engine Switch Subassembly	1
Fig. 8 - 6	P54040	Bolt	2
Fig. 8 - 7	P54040	Bolt	1
Fig. 8 - 8	P54596-1	Collar	1
Fig. 8 - 9	P54186	Bolt	1
Fig. 8 - 10	P54040	Bolt	4

Carburetor Assembly

No.	Part	Description	Qty.
Fig. 9 - 1	56035-E-067	Carburetor Assembly	1
Fig. 9 - 2	56035-E-068	Air Cleaner Gasket	1
Fig. 9 - 3	P54166	Carburetor Gasket	1
Fig. 9 - 4	P54164	Carburetor Insulator Plate	1
Fig. 9 - 5	P54162	Carburetor Insulator Gasket	1

Muffler Assembly

No.	Part	Description	Qty.
Fig. 11 - 1	P54426	Exhaust Outlet Gasket	1
Fig. 11 - 2	56035-E-076	Nut	2
Fig. 11 - 3	56035-E-077	Muffler Assembly	1

Air Cleaner

No.	Part	Description	Qty.
Fig. 10 - 1	56035-E-073	Air Cleaner	1
Fig. 10 - 2	P54179	Nut	2
Fig. 10 - 3	56035-E-073-1	Air Cleaner Element	1

Gas Tank

No.	Part	Description	Qty.
Fig. 12 - 1	56035-E-078	Fuel Tank	1
Fig. 12 - 2	56035-E-079	Fuel Strainer	1
Fig. 12 - 3	56035-E-080	Fuel Tank Cover	1
Fig. 12 - 4	56035-E-081	Fuel Tank Oil Outlet Subassembly	1
Fig. 12 - 5	56035-E-082	Collar	2
Fig. 12 - 6	56035-E-083	Fuel Tube	1
Fig. 12 - 7	56035-E-084	Bolt	1
Fig. 12 - 8	P54179	Nut	2
Fig. 12 - 9	56035-E-102	Rubber Jacket	1

Flywheel/Impeller

No.	Part	Description	Qty.
Fig. 13 - 1	P54630	Flywheel Nut	1
Fig. 13 - 2	56035-E-087	Starter Pulley	1
Fig. 13 - 3	P54634	Impeller	1
Fig. 13 - 4	P54636	Flywheel Subassembly	1
Fig. 13 - 5	56035-E-091	Ignition Coil	1
Fig. 13 - 6	P54628	Bolt	2

Control Assembly, Throttle

No.	Part	Description	Qty.
Fig. 14 - 1	56035-E-092	Throttle Control Assembly	1
Fig. 14 - 2	56035-E-094	Governor Spring	1
Fig. 14 - 3	P54620	Governor Rod	1
Fig. 14 - 4	P54618	Throttle Valve Returning Spring	1
Fig. 14 - 5	P54624	Governor Support Subassembly	1
Fig. 14 - 6	P54040	Bolt	2
Fig. 14 - 7	P54622	Governor Support Bolt	1
Fig. 14 - 8	P54179	Nut	1

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 8 Pages, 2.01MB

6e1f70fb-6aa4-46ab-b1b4-29ae347c4524 Microsoft: Print To PDF

Related Documents

	WEN Plate Compactor Vibrating Assembly Replacement Guide A step-by-step guide for replacing the vibrating assembly on WEN 56035, 56035T, and 56035M plate compactors. Includes tools needed, removal, and reassembly instructions with torque specifications.
	WEN Plate Compactor Belt and Clutch Replacement Guide A step-by-step guide for replacing the belt or clutch on WEN 56035, 56035T, and 56035M plate compactors. Includes tools needed, removal, and installation instructions.
	WEN DF452iX Generator Exploded View and Parts List Detailed exploded views and parts lists for the WEN DF452iX Super Quiet 4500-Watt Remote Electric Start Dual Fuel RV-Ready Portable Inverter Generator, including components for the crankcase, cylinder head, crankshaft, piston, valves, starter, carburetor, alternator, air filter, muffler, fuel tank, frame, and control panel.
	WEN DT1516 16-Inch Dethatcher & Scarifier Instruction Manual This manual provides comprehensive instructions for the WEN DT1516 16-Inch Dethatcher & Scarifier, covering safety guidelines, assembly, operation, maintenance, troubleshooting, and parts lists.
	WEN 49140 4V Max Lithium-Ion Cordless Screwdriver User Manual and Safety Guide Comprehensive guide for the WEN 49140 4V Max Lithium-Ion Cordless Screwdriver, covering specifications, safety instructions, operation, maintenance, troubleshooting, parts list, and warranty information.
	WEN MM1214/MM1214T 12-Inch Dual-Bevel Miter Saw Instruction Manual Comprehensive instruction manual for the WEN MM1214 and MM1214T 12-Inch Dual-Bevel Miter Saw, covering safety, operation, assembly, maintenance, and troubleshooting.
	WEN 3959/3959T 9-Inch Band Saw Instruction Manual Comprehensive instruction manual for the WEN 3959 and 3959T 9-inch band saw, covering safety, operation, assembly, maintenance, and parts lists.
	WEN 6502, 6502T 4.3-Amp Belt & Disc Sander Instruction Manual Comprehensive instruction manual for the WEN 6502 and 6502T 4.3-Amp Belt & Disc Sander, covering safety guidelines, assembly, operation, maintenance, troubleshooting, and parts list. Learn how to safely operate and maintain your WEN sander.