Wireless Door Chime User Manual
Model: N18 Smart Home
Welcome
Thank you for purchasing our security products!
Our plug-in receiver and wireless door sensor have a maximum range of 600 feet (200 meters). It is suitable for multiple application scenarios, including but not limited to:
- Alerts you when customers open your store doors.
- Alerts you when a thief opens a window or door.
- Alerts you when your kids are out without you looking.
- Alerts you when the company has visitors.
Our plug-in receiver is expandable, allowing you to pair with a variety of transmitters such as contact sensors, motion detectors, and pet putters. One plug-in receiver can be paired with up to 58 different transmitters, and each transmitter can be set to a different ringtone (58 ringtones to choose from).
Our wireless door sensors can be paired with up to 58 receivers, allowing you to receive signals even in different rooms. Please note that extended pairing can only be done with Satisure brand products.
Features
- Sensor: Wireless, easy to install.
- Receiver: Plug-in, easy to install.
- Radio frequency transmission up to 600 feet.
- Separate the sensor to trigger the receiver to ring.
- 5-level adjustable volume (0-110dB).
Specifications
| Parameter | Sensor | Receiver |
|---|---|---|
| Power | 1*23A 12V alkaline Battery Powered (included) | AC100-240V Operation |
| Installation Distance (Sensor Parts) | Less than 0.8 inches | |
| Standby Power | <0.3W | N/A |
| Wireless Frequency | 433.92MHZ | |
| Working Range | 600ft (in open range) | |
| Working Humidity | Less than 85% | |
| Operating Temperature | 0-55°C | N/A |
| LED Indication | Flashing Indicator (Blue) | Flashing Indicator (Blue) |
Package Contents
- Door Sensor (Battery Included)
- Plug-in Receiver
- Screwdriver
- Door Sensor Fixed Sticker
- User Manual
How Does It Work?
A door sensor alarm system typically has two main components:
- The Indoor Alarm Receiver: This unit acts as an alarm buzzer. It receives a signal from the door sensor and activates an alarm (adjustable from 0-110dB). It also features a flashing LED indicator, making it easy to locate even in the dark. The receiver simply plugs into an AC outlet.
- The Door Sensor: This sensor transmits a signal to the receiver when its two parts are separated by no more than 0.8 inches. A blue light flashes on the sensor when it transmits a signal. It can be installed on windows or doors. The product has a built-in battery, which will need to be replaced when depleted.
Overview
Plug-in Receiver
- The receiver offers up to 58 melodies to choose from.
- It features 5 volume levels, adjustable from 0-110dB.
- The LED flashes blue when the receiver is triggered.
- The receiver will ring when the door sensors are separated.
Wireless Door Sensor
- The door sensor is installed using a double-sided adhesive strip.
- After attaching the sensor to the door, press firmly for at least 5 seconds.
- Ensure the installation gap between the two parts of the sensor is less than 0.8 inches.
- Remember to replace the battery when it is depleted.
Installation
The receiver unit measures approximately 80mm by 80mm.
The door sensor consists of two parts. The main unit and a smaller contact piece. These are attached to a door and its frame respectively. The installation gap between the two parts must be less than 0.8 inches (approximately 2 cm) for the sensor to function correctly.
Getting Started
- Powering the Indoor Chime Receiver: Plug the receiver into an AC outlet. Press the volume button to test if it produces sound. For optimal performance, keep the receiver away from other electrical equipment like TVs or microwaves.
- Powering the Door Sensor: The door sensor is powered by a 1*23A 12V alkaline battery (included). It operates wirelessly up to a maximum distance of 600ft/200m (in open range) from the receiver. Remember to replace the battery when it runs out.
- Sound Volume Control: Press the volume control button on the receiver to cycle through the 5 available volume levels.
- Setting Ringtone: There are 58 melodies to choose from.
- Press the Up Button or Down Button to select your desired ringtone.
- Press the Volume Button and the Down Button together. The receiver will emit a sound, indicating it's ready for setting.
- Quickly separate the two parts of the door sensor. When you hear the selected ringtone, the setting is successful. The new ringtone will be applied to the most recently synced transmitter.
- Pairing a Transmitter to the Receiver:
- First, select your favorite ringtone.
- Press the Volume Button and the Down Button together. The receiver will emit a sound, indicating it is in pairing mode.
- Quickly separate the two parts of the door sensor. When the receiver rings, the pairing is successful.
Note: Pairing mode lasts for 5 seconds only. Ensure you activate the transmitter within this time. Pairing mode will exit automatically after completion or timeout.
- Pairing Two or More Transmitters: To pair additional door sensors, repeat STEP 5.
- Reset: Press the Down Button for 5 seconds to reset the receiver to its default settings. The receiver will sound 'Ding Dong' and flash its LED to confirm the reset. You can then follow STEP 5 to pair again.
How to Replace the Battery?
Referring to the diagrams:
- Slide the battery cover upward to open it.
- Remove the old battery and replace it with a new 23A 12V alkaline battery, ensuring it is installed correctly according to the internal structure of the battery compartment.
- Slide the cover back down to lock the battery compartment, preventing it from dislodging due to door vibrations.
After replacing the battery, place the two parts of the door sensor together, then separate them. The blue LED will light up, confirming a successful battery replacement.
Tip: Battery replacement can be done directly without removing the door sensor from the door.
Q&A
| Problem | Cause | Solution |
|---|---|---|
| Blue indicator on the door sensor does not light up | The battery insulating film has not been peeled off | Peel off the insulating film. |
| The battery is not properly installed | Take out the battery and install it again. | |
| The battery power is low | Replace with a new 23A 12V alkaline battery. | |
| Receiver does not respond to the transmitter (No sound & light) | Silent mode is on | Press the Volume Button to make a sound. |
| The outlet has no power | Make sure the outlet has power. | |
| Unsuccessful pairing | Pair the receiver with the door sensor again, refer to Page 10. | |
| Receiver only lights without making any sound | The receiver is garbled | Reset the receiver first (refer to Page 11), then pair the receiver with the door sensor again (refer to Page 10). |
| Receiver rings without opening the door/window | The receiver is garbled | Reset the receiver first (refer to Page 11), then pair the receiver with the door sensor again (refer to Page 10). |
Chimes List
The receiver offers 58 selectable ringtones:
- 1 Ding-dong, Ding-dong
- 2 Ding-dong
- 3 Ding-dong Chime
- 4 DingDong DingDong
- 5 DingDingDong
- 6 Alarm Sound Effect
- 7 Hello Welcome
- 8 Horn Sound
- 9 Knock Knock Knock
- 10 The Cuckoo
- 11 The Cuckoo Waltzes
- 12 Dog
- 13 Bird
- 14 Owl
- 15 Horse
- 16 Chicken
- 17 Cat
- 18 Let It Snow
- 19 Dingdong Merrily On High
- 20 Jingle Bells
- 21 We Wish You A Merry Christmas
- 22 Westminster Chimes 1
- 23 Westminster Chimes 2
- 24 Big Ben Electronic Doorbell
- 25 Classphone
- 26 Di, Di, Di, Di, Di, Di
- 27 Reflection
- 28 Happy Hour
- 29 Pan-fried Tea
- 30 Xylophone
- 31 Flute Sound Doorbell
- 32 Electric Piano
- 33 Alerting Ringtone
- 34 Twilight Sms Tone
- 35 Classical Organ
- 36 Joy To The World
- 37 Waltz Of The Flowers
- 38 For Alice
- 39 The William Tell Overture
- 40 Butterfly Dream
- 41 Happy Birthday
- 42 Eva's Polka
- 43 Russe Dance
- 44 Souvenirs Denfance
- 45 Victory
- 46 Turkey March
- 47 Toreador Song
- 48 Telephone Ring
- 49 Spanish Girl
- 50 Arpeggio Sound
- 51 Overture William Tell
- 52 Drinking Song
- 53 Romance De Amor
- 54 Music Box Dancer
- 55 Fantaisie Impromptu
- 56 Red River Valley
- 57 Schubert's Nocturne
- 58 Memory
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.