Zalman Z9 Neo Plus ATX Mid Tower Computer Case

1. Cautionary Note

• Please read this manual thoroughly prior to installation.
• Before installing, check the components and condition of the product, and if any problem is found, contact the retailer.
• Please wear gloves while handling this product to prevent injuries.
• Incorrect cable connections may cause short circuits leading to fire hazards.
• Do not block the front intake vent or the rear exhaust vent.
• Keep this unit away from heat sources, direct sunlight, water, oil and place the unit on a flat and well-ventilated area.
• Do not clean the product surface with chemicals or wet cloth (e.g., industrial alcohol, paint thinner, organic solvents).
• Avoid inserting objects or hands into the system while it is in operation to prevent product damage and injuries.
• Zalman Tech Co., Ltd. is not responsible for any improper use.
• Product design and specifications may be revised to improve quality and performance.

2. Components

Included hardware:

• Bolt A (8EA)
• Bolt B (18EA)
• Bolt C (6EA)
• Bolt D (12EA)
• Bolt E (2EA)
• Bolt F (4EA)
• Cable Tie (5EA)
• Stand off (3EA)
• Speaker (1EA)
• Manual (1EA)

Diagram Description: This section lists various screws (Bolt A-F), cable ties, standoffs, a speaker, and the manual. Each item is shown with its quantity.

3. Top I/O Ports

Diagram Description: A diagram illustrates the top panel of the computer case, showing the placement of the Power Button, Reset Button, Headphone and Microphone jacks, and USB 2.0 and USB 3.0 ports.

4. Installation

4.1 Side Panel Removal

Diagram Description: Illustrates the process of removing the side panel from the computer case, typically by unscrewing or unlatching it.

4.2 Motherboard Installation

Diagram Description: Shows different motherboard form factors (M-ITX, M-ATX, ATX) and indicates the corresponding standoff positions required for installation within the case. It notes that 6 standoffs are pre-installed and refers to diagrams for additional positions based on motherboard type.

4.3 VGA Card Installation

Instructions: Unfasten the hand screw holding the PCI cover, remove the cover, and then install the VGA card, securing it with a fixing screw.

Diagram Description: Depicts removing the PCI slot cover and then installing a graphics card into a PCI-e slot.

4.4 5.25" Drive Installation

Instructions: Remove the front cover to access the drive bays.

Diagram Description: Shows the front bezel of the case being pulled forward to reveal the 5.25" drive bays.

4.5 ODD Installation

Instructions: Install an optical drive into the 5.25" bay.

Diagram Description: Illustrates an optical drive being slid into a 5.25" bay.

4.6 3.5", 2.5" HDD Installation

Instructions: Install the drive onto the HDD tray, then remove the HDD tray as shown. Install the drive onto the HDD tray. Tip: When transporting an assembled system, please secure the HDD with Bolt B as shown.

Diagram Description: Shows a 3.5" HDD or 2.5" SSD/HDD being mounted onto a removable tray, which is then inserted into the case. A tip highlights securing the drive with a specific bolt during transit.

4.7 Cable Connection

Diagram Description: Illustrates the connection of various front panel cables to the motherboard headers. These include Power Button, Power LED, Reset Button, Power HDD LED, HD Audio, USB 2.0, and USB 3.0.

4.8 How to Install the Cooler

Instructions: As shown in the picture, install the cooler on the top of the case using bolts.

Diagram Description: Shows a CPU cooler or case fan being mounted onto the top exhaust area of the computer case using screws.

5. Warranty Information

Zalman Tech products come with the following limited warranties:

• 1 Year Warranty: Applies to CPU coolers (CNPS series, Reserator 3 Max series, LQ3xx series), computer cases, keyboards, mice, laptop coolers, case fans, hardware enclosures (VE series), audio devices, and other unspecified accessories.
• 3 Year Warranty: Applies to HQ series AIO CPU coolers.
• 7 Year Warranty: Applies to EBT series Power Supply Units.

Zalman USA reserves the right to change warranty availability at its discretion; changes are not retroactive.

The limited warranty does not cover:

• Non-Zalman brand products and accessories.
• Problems resulting from external causes such as accident, abuse, misuse, or electrical power issues.
• Any service not authorized by Zalman USA.
• Usage not in accordance with product instructions.
• Failure to follow product instructions or perform preventive maintenance.
• Problems caused by using non-Zalman supplied accessories, parts, or components.
• Products with missing or altered Service Tags and/or serial numbers.

For United States and Canada:

• Technical support and warranty inquiries: support.usa@zalmanusa.com
• Toll-free customer service: 1-888-925-6266

For all other regions:

• Email: techsupport@zalman.co.kr
• For detailed warranty information, please visit www.zalman.com.