pool.ntp.org: the internet cluster of ntp servers
Internet anywhere – devolo cures weak Wi-Fi | devolo
User Manual for devolo Magic models including: 2 WiFi Next Powerline and Mesh Wi-Fi
2021 devolo AG Aachen (Germany). The reproduction and distribution of the documentation and software supplied with this product and the use of its contents ...
File Info : application/pdf, 58 Pages, 2.30MB
DocumentDocumentManual devolo Magic 2 WiFi next
devolo Magic 2 WiFi next
© 2021 devolo AG Aachen (Germany)
The reproduction and distribution of the documentation and software supplied with this product and the use of its contents is subject to written authorization from devolo. We reserve the right to make any alterations that arise as the result of technical development.
Trademarks Android TM is a registered trademark of Open Handset Alliance. Linux® is a registered trademark of Linus Torvalds. Ubuntu®is a registered trademark of Canonical Ltd. Mac® and Mac OS X® are registered trademarks of Apple Computer, Inc. iPhone®,iPad® and iPod® are registered trademarks of Apple Computer, Inc. Windows® and Microsoft® are registered trademarks of Microsoft, Corp. Wi-Fi®, Wi-Fi Protected AccessTM, WPATM, WPA2TM and Wi-Fi Protected SetupTM are registered trademarks of the Wi-Fi Alliance®. devolo and the devolo logo are registered trademarks of devolo AG. The firmware package from devolo contains files which are covered by different licenses, in particular under devolo proprietary license and under open source license (GNU General Public License, GNU Lesser General Public License or FreeBSD License). The source code which is available for Open Source distribution can be requested in writing from gpl@devolo.de. All other names mentioned may be trademarks or registered trademarks of their respective owners. Subject to change without notice. No liability for technical errors or omissions. This product has been manufactured and is sold under a licence granted to devolo AG by Vectis One Ltd for patents concerning WiFi-technology and owned by Wi-Fi One, LLC ("Licence"). The Licence is limited exclusively to finished electronics for end-use and does not extend rights to any third party device or process used or sold in combination with this product.
devolo AG
Charlottenburger Allee 67 52068 Aachen Germany www.devolo.global
Version 1.0_3/21
Contents
1 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.1 About this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.2 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 1.3 CE Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.4 Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1.5 devolo on the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2.1 devolo Magic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2.2 Introduction to the devolo magic adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2.3 Pairing Establishing a PLC connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2.3.1 Reading the PLC indicator light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.3.2 Wi-Fi button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 2.3.3 Reading the Wi-Fi indicator light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 2.3.4 Reset button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 2.3.5 Network jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 2.3.6 Wi-Fi antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 2.3.7 Integrated electrical socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3 Initial use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 3.1 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 3.2 System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 3.3 Connecting the devolo Magic 2 WiFi next . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 3.3.1 Starter Kit Automatic set-up for a new devolo Magic PLC network . . . . . . . . . . . . . . 25 3.3.2 Addition Expanding an existing PLC network by adding another devolo Magic 2 WiFi next . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 3.3.3 Changing the network password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 3.3.4 Establish a Wi-Fi connection with the devolo Magic 2 WiFi next . . . . . . . . . . . . . . . . . . 26 3.4 Installation of devolo software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 3.5 Removing the devolo Magic adapter from a PLC network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
devolo Magic 2 WiFi next
4 Network configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 4.1 Calling up the built-in web interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 4.2 General information about the menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 4.3 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 4.3.1 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 4.3.2 Wi-Fi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 4.3.3 Powerline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 4.3.4 LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 4.4 Wi-Fi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 4.4.1 Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 4.4.2 Wi-Fi networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 4.4.3 Guest network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 4.4.4 Mesh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 4.4.5 Schedule control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 4.4.6 Parental control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 4.4.7 Wi-Fi Protected Setup (WPS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 4.4.8 Neighbour networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 4.5 Powerline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 4.6 LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 4.6.1 Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 4.6.2 IPv4/IPv6 configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 4.7 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 4.7.1 Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 4.7.2 Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 4.7.3 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 4.7.4 Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 4.7.5 Config Sync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
devolo Magic 2 WiFi next
5 Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 5.1 Technical specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 5.2 Bandwidth optimization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 5.3 Frequency range and transmitting power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 5.4 Channels and carrier frequencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 5.5 Disposal of old devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 5.6 Warranty conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
devolo Magic 2 WiFi next
7 Preface
1 Preface
Welcome to the fantastic world of devolo Magic!
In no time at all, devolo Magic transforms your house into a multimedia home that is ready for the future today. devolo Magic gives you noticeably higher speeds, more stability and greater range, providing the perfect Internet experience as a result!
1.1 About this manual
Carefully read all instructions before setting up the device and store the manual and/or installation guide for later reference.
After a brief introduction to ,,devolo Magic" and to the devolo Magic 2 WiFi next in Chapter 2, Chapter 3 tells you how to successfully start using the adapter in your network. Chapter 4 describes in detail the setting options of the built-in devolo Magic configuration interface.
Tips for bandwidth optimisation, information about environmental compatibility of the device, as well as our warranty terms, can be found in Chapter 5 at the end of the manual.
Description of the icons
This section contains a brief description of the icons used in this manual and/or on the rating plate, the device connector, as well as the icons used on the package:
Icon
Description
Very important safety symbol that warns you of hazardous electrical voltage which if not avoided can result in serious injury or death.
Very important safety symbol that warns you of a potentially dangerous situation which if not avoided can result in serious injury or death.
An important safety symbol that warns you of a potentially burn hazard which if not avoided can result in minor injuries or damage to property.
An important safety symbol that warns you of a potentially dangerous situation involving a tripping hazard which can result in injuries.
devolo Magic 2 WiFi next
Preface 8
Icon
Description
Icon
Description
An important note that should be observed which can potentially lead to material damages.
The device may only be used indoors in dry conditions.
The device is a Class I product. All electrically conductive (made of metal) housing parts where a voltage can be applied during operation or maintenance in the event of an error must be continuously connected to the earth wire.
The manufacturer/distributing company uses the CE marking to declare that the product meets all applicable European regulations and has been subjected to the prescribed conformity assessment procedures.
It is used to prevent the occurrence of waste electrical and electronic equipment and to reduce this type of waste through reuse, recycling and other forms of utilisation. The European Community WEEE Directive establishes minimum standards for handling waste electrical and electronic equipment in the EU.
Additional
information,
background material and
configuration tips for your device.
Indicates a completed course of action
1.2 Intended use
Use devolo devices, devolo software and the provided accessories as described to prevent damage and injury.
Products
devolo devices are communication devices designed for indoors.* Depending on the product, they
devolo Magic 2 WiFi next
9 Preface
are equipped with a PLC - (PowerLine Communication) and/or a Wi-Fi module and/or a broadband module. The devices communicate with each other by means of, depending on the product, PLC, data and telephone line (e.g. coaxial or twisted pair) and/or Wi-Fi.
devolo devices do not replace the existing router. They enable transmission of the existing Internet/ data signal over the in-house wiring and via Wi-Fi and integrate Internet-compatible terminal devices into the home network.
Under no circumstances may devolo devices be used outdoors, because large temperature fluctuations and moisture can damage both the device and the power line*. devolo devices may not be installed at a height above two metres unless an additional fastening mechanism is available. The products are intended for operation in the EU, Switzerland and Norway.
* This does not include devolo outdoor devices, which are suitable for outdoor applications based on their IP classification.
Software
devolo devices can be used only with the free, downloadable programs approved and available on devolo AG's website (www.devolo.global) and in app stores (iOS and Google Play). Any modifica-
tions to the product-specific firmware or software could damage the products and, in the worst-case scenario, render them unusable, negatively affect conformity and cause the warranty claims to become void.
Always use the most up-to-date software version to make sure you have the latest security functions and device updates. The installed devolo software notifies you automatically if a new software version is available.
Accessories
Use only the provided accessories.
1.3 CE Conformity
This product complies with the technical requirements of the directives 2014/53/ EU, 2011/65/EC and 2009/125/EC.
This product is designed for use in the EU, Switzerland and Norway.
A printout of the simplified CE declaration of this product is separately included and can also be found under www.devolo.global/support/ce.
devolo Magic 2 WiFi next
Preface 10
1.4 Safety notes
It is essential to have read and understood all safety and operating instructions before the devolo device is used for the first time; keep them safe for future reference.
DANGER! Electrical shock caused by electricity Do not reach into the electrical socket. Do not open the device. Do not insert any objects into the electrical socket or into the ventilation openings
DANGER! Electric shock caused by electricity Device must be plugged into a power socket with a connected earth wire
devolo devices may be operated only on a mains power supply as described on the rating plate.
CAUTION! Tripping hazard Lay the network cable in a barrier-free manner; ensure that the electrical socket and the connected network devices are easily accessible
To disconnect devolo devices from the mains supply, unplug the device from the electrical socket.
CAUTION! Damage to the device caused by ambient conditions Only use device indoors in dry conditions
CAUTION! Heat development during operation Certain housing components can become very hot in certain situations. Attach device so that it is touch-proof, observing optimal positioning
devolo devices should only be installed at locations that guarantee adequate ventilation. Slots and openings on the housing are used for ventilation:
b Do not cover devolo devices during operation. b Do not place any objects on devolo devices. b Do not insert any objects into the openings of
devolo devices. b devolo devices must not be placed directly
next to a naked flame (such as fire or candles). b devolo devices must not be exposed to direct
heat radiation (e.g. radiator, direct sunlight). Users do not need to carry out any maintenance on devolo devices. In the event of damage, disconnect the devolo device from the mains supply by pulling it or its plug out of the electrical socket. Then contact qualified specialist personnel (after-
devolo Magic 2 WiFi next
11 Preface
sales service) exclusively. Damage is deemed to have occurred, for example,
b if a button is damaged. b if the power plug is damaged. b if the devolo device has been showered with
liquid (such as rain or other water). b if the devolo device is inoperable. b if the housing of the devolo device is damaged.
CAUTION! Damage to housing from cleaning agents containing solvents Clean only electroless and with dry cloth
Do not plug devolo devices directly into each other. Devices that are plugged into each other can experience a decrease in transmission rate.
If you have any further ideas or suggestions related to our products, please don't hesitate to contact us at support@devolo.com!
1.5 devolo on the Internet
For detailed information on our products, visit www.devolo.global.
There you will find product descriptions and documentation, and also updates of devolo software and your device's firmware.
devolo Magic 2 WiFi next
2 Introduction
2.1 devolo Magic
Home is where devolo Magic is in no time at all, devolo Magic transforms your house or flat into a multimedia home of the future with noticeably higher speed, more stability and greater range, providing the perfect Internet experience as a result!
Be inspired by products that are astonishingly easy to install, with impressive, innovative technology and unbeatable performance.
Introduction 12
Fig. 1 devolo Magic throughout the home
Be ready for the technology of the future today
devolo Magic embodies the new generation of the tried-and-tested Powerline technology (PLC) based on the cutting-edge G.hn architecture. G.hn was developed by the International Telecommunication Union (ITU) with ongoing development provided primarily by the HomeGrid Forum industry association. devolo Magic products are certified according to HomeGrid standards and are compatible with other HomeGrid-certified products.
devolo Magic 2 WiFi next
13 Introduction
Like the HomePlug AV technology used in established devolo dLAN devices, devolo Magic uses the household mains supply for data transmission and secures ideal performance and stability in locations where network cables are not viable or desired and/or the Wi-Fi frequently falls short due to ceilings and walls.
To set up a devolo Magic network, you need at least two devolo Magic devices. For technical reasons, devices from the devolo Magic series are not compatible with dLAN devices.
2.2 Introduction to the devolo magic adapter
Unpack plug in get started and be prepared for the new generation of the tried-and-tested Powerline technology and innovative mesh Wi-Fi with swiftness and stability:
Powerline
b At speeds up to 2400 Mbps b Over distances up to 500 metres b Security with 128-bit AES Powerline encryp-
tion
Mesh Wi-Fi
b At speeds up to 1200 Mbps
b Four antennas cover the 2.4 and 5 GHz Wi-Fi frequencies at the same time and use the full extent of the entire 5 GHz frequency band (Dynamic Frequency Selection, DFS).
b Multi-user MIMO technology
The
devolo Magic 2 WiFi next supplies your smart-
phone, tablet and other devices with data
streams simultaneously at the speed you
require and at an efficient transfer rate.
b Air-time fairness Quicker Wi-Fi devices take priority in the network.
b Band steering Use of the optimum frequency band (2.4 and 5 GHz frequency band)
b Roaming Quickly and seamlessly connect to the strongest Wi-Fi access point
b Security with WPA2/WPA3 for wireless ac ("IEEE 802.11a/b/g/n/ac" Wi-Fi high-speed standards)
b Convenient additional functions such as parental controls, guest Wi-Fi, time control and Config Sync are integrated in the devolo Magic 2 WiFi.
devolo Magic 2 WiFi next
b Efficiency The integrated PowerSave mode reduces energy consumption automatically at low data traffic.
b The 2 gigabit network connectors on the devolo Magic 2 WiFi next let you connect stationary network devices--such as a game console, TV or media receiver--to your Internet access point over the Powerline network (e.g. Internet router).
b Its integrated electrical socket can be used like a normal wall socket to supply power to an additional network device or a power strip.
The devolo Magic 2 WiFi next features
b An integrated electrical socket, b A PLC button with LED status display, b A Wi-Fi button with LED status display, b Four internal Wi-Fi antennas, b Two gigabit network connectors b A reset button (next to the network connec-
tors).
The LED status displays can be disabled. You can find more information about this in Chapter 4 Network configuration or in the product manual for the devolo Cockpit software available online at www.devolo.global/devolo-cockpit.
Introduction 14
Fig. 3 Network connections
2.3 Pairing Establishing a PLC connection
devolo Magic adapters that are in the factory default condition, i.e. have been recently purchased or successfully reset (see Chapter 3.5 Removing the devolo Magic adapter from a PLC network), automatically start to attempt to pair (establish a PLC connection) with anotherdevolo Magic adapter when reconnected to the mains supply.
devolo Magic 2 WiFi next
15 Introduction
Starting up a new devolo Magic PLC network
After plugging the devolo Magic adapters into available power sockets, a new devolo Magic network is established automatically within 3 minutes.
Expanding an existing devolo Magic PLC network by adding another devolo Magic adapter
In order to use a new devolo Magic 2 WiFi in your devolo Magic- network, first you have to connect it to your existing devolo Magic adapters devices as a network. This is accomplished by using a shared PLC password, which can be assigned in various ways:
b Using
devolo Cockpit
or
the
devolo Home Network App (see Chapter 3.4
Installation of devolo software)
b Using the web interface (see Chapter 4.5
Powerline)
b Using the PLC button as described below.
devolo Magic 2 WiFi next
1 To do so, plug the new devolo Magic adapter into an available power socket and, for approximately 1 second, press the PLC button on a devolo Magic adapter in your existing devolo Magic network.
2 The new devolo Magic adapter pairs automatically so no button needs to be pressed. The LED of this adapter now also flashes white.
After a short time, the flashing LED becomes a steady white light. The devolo Magic adapter has been successfully integrated into your existing devolo Magic network.
For each pairing operation, only one additional devolo Magic adapter can be added at a time.
You can find detailed information about in-
stalling devolo Magic adapters in Chapter
3.3
Connecting
the
devolo Magic 2 WiFi next.
Introduction 16 devolo Magic 2 WiFi next
17 Introduction
2.3.1Reading the PLC indicator light
The integrated PLC indicator light (LED) shows the status for the devolo Magic 2 WiFi by illuminating and/or flashing:
LED
Flashing be- Meaning
haviour
LED status display (web interface*)
1 Red LED Lights up for Start-up process up to 2 sec.
Cannot be disabled
2 Red LED Flashes at in- Status 1:
Cannot be disabled
tervals of 0.5 The reset of the devolo Magic adapter was
sec. (on/off) successful. The PLC/reset button has been
pressed and held for 10 seconds.
Status 2: The devolo Magic adapter (once again) has the factory default settings. Since the last reset, no pairing with another devolo Magic adapter has taken place. Connect the adapter with another devolo Magic adapter to create a fullfledged devolo Magic network as described in Chapter 2.3 Pairing Establishing a PLC connection.
devolo Magic 2 WiFi next
Introduction 18
LED
Flashing be- Meaning
haviour
LED status display (web interface*)
3 Red LED Lights up stea- Status 1:
Can be disabled
dy
The other network nodes are in standby
mode and cannot currently be accessed over
the mains supply. The PLC LEDs of the other
devolo Magic adapters flash white only for a
short time.
Status 2: The connection to the other network nodes has been interrupted. There may be electromagnetic or radio frequency interference on the power line. In this case, put the devolo Magic adapters closer to each other or try to shut off the source of interference.
4 Red and Flashes at in- Data transmission rate not in optimum Can be disabled
white
tervals of 0.1 range **
LED
sec. red/2 sec.
white
devolo Magic 2 WiFi next
19 Introduction
LED
Flashing be- Meaning
haviour
LED status display (web interface*)
5 White LED
Status 1: Flashes at intervals of 0.5 sec. (on/off)
Status 2: Flashes at intervals of 1 sec. (on/off)
Status 1: This devolo Magic adapter is in pairing mode and the system is searching for new devolo Magic adapters.
Status 2: Someone has triggered the "Identify device" function on the web interface or in the devolo Home Network App. This function identifies the devolo Magic adapter being sought.
Cannot be disabled
6 White LED
Lights up stea- The devolo Magic connection does not have Can be disabled
dy
any issues and the devolo Magic adapter is
ready to operate.
7 White LED
Flashes at in-
tervals
of
0.1 sec.. on /
5 sec. off
The devolo Magic adapter is in standby mode.***
Can be disabled
8 Red and Flashes at in- The devolo Magic adapter is carrying out a Cannot be disabled
white
tervals
of firmware update.
LED
0.5 sec. red/
0.5 sec. white
devolo Magic 2 WiFi next
* Information about the web interface can be found in Chapter 4 Network configuration.
** Information on improving the transmission rate can be found in Chapter 5.2 Bandwidth optimization.
***A devolo Magic adapter switches to standby mode after approximately 10 minutes if no active network device (e.g. computer) is connected to the network interface and the Wi-Fi is switched off. In this mode, the devolo Magic adapter cannot be accessed over the electrical wiring. As soon as the network device (e.g. computer) connected to the network interface is switched on again, your devolo Magic adapter can also be accessed over the electrical wiring again.
Check whether the adapter is connected to
the mains supply correctly and whether the
pairing operation has been carried out suc-
cessfully. For more information about this,
refer to
3.3 Connecting the
devolo Magic 2 WiFi next.
2.3.2Wi-Fi button
This button controls the following functions:
Introduction 20 Wi-Fi on/off In the factory default settings, the Wi-Fi setting is already enabled and the Wi-Fi encryption is set to WPA2. The default WiFi key for the initial installation of the devolo Magic 2 WiFi next is the device's WiFi key. You will find the unique key on the label on the back of the housing.
Fig. 4: country-specific type plate
devolo Magic 2 WiFi next
21 Introduction
Before the networking procedure, write down the Wi-Fi key of the devolo Magic 2 WiFi. You can find the device's unique key on the label on the rear side of the housing.
In order to connect the devolo Magic 2 WiFi with your laptop, tablet or smartphone later via Wi-Fi, enter the noted Wi-Fi key as the network security key.
b In order to switch Wi-Fi off, press and hold the Wi-Fi button longer than 3 seconds.
b In order to switch Wi-Fi back on, briefly tap the Wi-Fi button.
Connecting Wi-Fi devices via WPS b If the device is still on factory defaults, tap the
Wi-Fi button in order to activate WPS. b If the Wi-Fi connection was switched off and
you would like to activate WPS, press the Wi-
Fi button twice; once to switch Wi-Fi on, and again to activate WPS. b If the Wi-Fi connection is switched on and you want to copy these settings to another devolo Magic adapter, continue reading with the Chapter 4.7.5 Config Sync.
WPS is one of the encryption standards developed by the Wi-Fi Alliance. The objective of WPS is to make it easier to add devices to an existing network. For more detailed information, refer to Chapter 4.4.7 Wi-Fi Protected Setup (WPS).
2.3.3 Reading the Wi-Fi indicator light
The integrated Wi-Fi indicator light (LED) shows the status of the devolo Magic 2 WiFi by illuminating and/or flashing
Wi-Fi-LED Flashing behavior Meaning
LED status display (web interface*)
1 White LED Flashes at intervals The devolo Magic adapter is in Cannot be disabled
of 0,1 sec. on / WPS mode to integrate Wi-Fi-
5 sec. off
enabled devices via WPS.
devolo Magic 2 WiFi next
Wi-Fi-LED Flashing behavior Meaning
2 White LED Lights up steady
Wi-Fi is switched on and active.
Introduction 22
LED status display (web interface*) Can be disabled
3 White LED Off
Status 1: The Wi-Fi LED is switched off and the devolo magic adapter is still ready for use.
Can be disabled
Status 2: The Wi-Fi function ist disabled.
* Information about the web interface can be found in Chapter 4 Network configuration.
devolo Magic 2 WiFi next
23 Introduction
2.3.4Reset button
The reset button (next to the network jacks) has two different functions:
Restart
The device restarts if you press the Reset button for less than 10 seconds.
Factory default settings
1 To remove a devolo Magic adapter from your devolo Magic network and successfully restore its entire configuration to the factory defaults, press and hold the reset button longer than 10 seconds.
Keep in mind that all settings that have already been made will be lost!
2 Wait until the LED flashes white and then disconnect the devolo Magic adapter from the mains supply.
The devolo Magic adapter has been successfully removed from your existing devolo Magic network.
2.3.5 Network jacks
You can use the network jacks on the devolo Magic adapter to connect it to stationary devices such as computers, game consoles, etc. using a standard network cable.
2.3.6 Wi-Fi antennas
The internal Wi-Fi antennas are for connecting to other network devices wirelessly.
2.3.7 Integrated electrical socket
Always use the integrated electrical socket on the devolo Magic adapter when connecting other consumers to the mains supply. In particular, electronic devices with mains adapter can negatively affect PLC performance.
The integrated mains filter in the devolo Magic adapter filters any such external interference and reduces any impairment of PLC performance.
devolo Magic 2 WiFi next
3 Initial use
This chapter tells you everything you need to know to set up and use your devolo Magic 2 WiFi next . We describe how to connect the device and briefly describe the devolo software that comes with it. For more information, please visit our website www.devolo.global.
3.1 Package contents
Please ensure that the delivery is complete before beginning with the installation of your devolo Magic 2 WiFi next :
b Single Kit: a 1 devolo Magic 2 WiFi next a Hard copy of installation guide a Printed security flyer a Simplified CE declaration
or
b Starter Kit: a 1 devolo Magic 2 WiFi next a 1 devolo Magic 2 LAN 1-1 a 1 network cable a Hard copy of installation guide
Initial use 24
a Printed security flyer a Simplified CE declaration or
b Multiroom Kit: a 2 devolo Magic 2 WiFi next a 1 devolo Magic 2 LAN 1-1 a 1 network cable a Hard copy of installation guide a Printed security flyer a Simplified CE declaration
devolo AG reserves the right to change the package contents without prior notice.
3.2 System requirements
b Operating systems supported by devolo Cockpit: a from Windows 7 (32-bit/64-bit), a from Ubuntu 13.10 (32-bit/64-bit), a from Mac (OS X 10.9)
b Gigabit network connection b Network connection
devolo Magic 2 WiFi next
25 Initial use
Please note that your computer or other device must have a network card or network adapter with a network interface.
To set up a devolo network, you need at least two devolo adapters.
3.3 Connecting the devolo Magic 2 WiFi next
CAUTION! Damage to the device caused by ambient conditions Only use device indoors in dry conditions
In the following sections we describe how to connect the devolo Magic 2 WiFi next and integrate it into a network. We clarify the exact procedures based on potential network scenarios.
For the permitted voltage range for operating the device and the power consumption, refer to the type plate on the rear of the device. For additional technical information on our products, refer to the product area at www.devolo.com.
3.3.1 Starter Kit Automatic set-up for a new devolo Magic PLC network
1 Connect one devolo Magic 2 LAN 1-1 to your Internet access device's network connection (e.g. your Internet router).
CAUTION! Tripping hazard Lay the network cable in a barrier-free manner and ensure that the electrical socket and the connected network devices are easily accessible
2 Plug both devolo Magic adapters into available power sockets within 3 minutes. As soon as the LEDs on both adapters flash white at regular intervals of 0.5 sec., they are ready to operate and automatically start the process of establishing an encrypted connection to each other (see Chapter 2.3.1 Reading the PLC indicator light).
If the LEDs on both devolo Magic adapters light up in white, then your devolo Magic network has been set up according to your individual specifications and is protected from unauthorised access.
devolo Magic 2 WiFi next
Initial use 26
3.3.2Addition Expanding an existing PLC network by adding another devolo Magic 2 WiFi next
Before you can use the devolo Magic 2 WiFi next in your devolo Magic network, first you have to connect it to your existing devolo Magic adapters as a network. This is accomplished by using a shared password.
1 Plug the devolo Magic 2 WiFi next into an available power socket. As soon as the LED flashes white at regular intervals of 0.5 seconds, the adapter is ready to operate but not yet integrated into a devolo Magic network (see Chapter 2.3.1 Reading the PLC indicator light).
2 Within 3 minutes, press the PLC button on a devolo Magic adapter in your existing devolo Magic network for approximately 1 sec.
The new devolo Magic adapter pairs automatically so no button needs to be pressed. The LED of this adapter now also flashes white.
If the LEDs light up white on both devolo Magic adapters, the new adapter has been successfully integrated into your existing devolo Magic network.
For each pairing operation, only one additional adapter can be added at a time.
3.3.3 Changing the network password
A network password can also be changed in the following ways:
b Using the web interface of the devolo Magic adapter (see Chapter 4.5 Powerline)
or
b Using
devolo Cockpit
or
the
devolo Home Network App. For more infor-
mation, refer to the chapter. 3.4 Installation of
devolo software
3.3.4 Establish a Wi-Fi connection with the devolo Magic 2 WiFi next
Establish the Wi-Fi connection with your laptop, tablet or smartphone by entering the previously noted WiFi key as the network security key.
Integrate the Wi-Fi adapter into an existing WiFi network
To ensure that the devolo Magic 2 WiFi next has the same Wi-Fi configuration as your Wi-Fi router, you can apply the Wi-Fi access data at the touch of a button using the WiFi Clone function. This can be enabled in different ways:
devolo Magic 2 WiFi next
27 Initial use
Activating WiFi Clone:
b Activating WiFi Clone by pressing a button: Briefly press the PLC button on your devolo Magic WiFi adapter. After the button is pressed, the LED flashes white. Press the WPS button on your router within 2 minutes. Please consult your router`s instruction for use to find out how long to press the button for.
or
b Activating WiFi Clone from the web interface. More information about this function can be found in Chapter WiFi Clone.
3.4 Installation of devolo software
Installing devolo Cockpit software
devolo Cockpit finds all accessible devolo Magic adapters in your devolo Magic network, displays information about these devices and encrypts your devolo Magic network individually. You can use the software to navigate to the integrated web interface.
Operating systems supported by devolo Cockpit (Version 5.0 or later):
b from Windows 7 (32-bit/64-bit) or later,
b from Ubuntu 13.10 (32-bit/64-bit),
b from Mac (OS X 10.9)
You can find the product manual, software
and additional information on
devolo Cockpit
online
at
www.devolo.global/devolo-cockpit.
Downloading the devolo Home Network App
The devolo Home Network App is devolo's free app also for checking and configuring WiFi, PLC and LAN connections for the devolo Magic adapter (using a smartphone or tablet). The smartphone or tablet connects to the devolo Magic adapter at home over Wi-Fi.
1 Download the devolo Home Network App to your smartphone or tablet computer from the corresponding store.
2 The devolo Home Network App is placed in your smartphone's or tablet's app list as usual. Tapping on the devolo Home Network App icon brings you to the start menu.
You can find more information about the devolo Home Network App online at www.devolo.global/home-network-app.
devolo Magic 2 WiFi next
3.5 Removing the devolo Magic adapter from a PLC network
To remove a devolo Magic adapter from your network and successfully restore its entire configuration to the factory default settings, press the reset button longer than 10 seconds. Wait until the LED flashes white and then disconnect the adapter from the mains supply.
Keep in mind that all settings that have already been made will be lost!
To integrate the mains supply into another network, proceed as described in Chapter 3.3.2 Addition Expanding an existing PLC network by adding another devolo Magic 2 WiFi next.
Initial use 28
devolo Magic 2 WiFi next
29 Network configuration
4 Network configuration
The devolo Magic 2 WiFi next has a built-in web interface that can be called up using a standard web browser. All settings for operating the device can be modified here.
4.1 Calling up the built-in web interface
You can access the built-in online web interface for the devolo Magic 2 WiFi next in different ways:
b Using the devolo Home Network App on your smartphone or tablet, you can access the device's web interface by tapping on the corresponding adapter symbol for the devolo Magic 2 WiFi next.
or
b Using the Cockpit software, you can get to the device's web interface by clicking on the corresponding tab for the devolo Magic 2 WiFi next. Then the program determines the current IP address and starts the configuration in the web browser.
By default, the web interface will open directly. However, if an access password has been set via the option System Management, you have to enter that password first. Read more about this under 4.7 System.
You can find more information on devolo Home Network App and Cockpit software in Chapter 3.4 Installation of devolo software.
4.2 General information about the menu
All menu functions are described in the corresponding interface as well as in the associated chapter in the manual. The sequence of the description in the manual follows the structure of the menu. The figures for the device interface serve as examples.
Logging in
The web interface is not password protected. Assigning a login password is mandatory when logging in for the first time to prevent unauthorised access by third parties.
devolo Magic 2 WiFi next
Enter your existing password each time you login again and confirm by pressing Log in.
Network configuration 30
The central areas of the web interface and their sub-categories are listed on the left edge. Click the entry for an area to move directly into it.
Logging out Log out of the web interface by clicking Log out.
Language selection Select the desired language in the language selection list.
Making changes
Once you make a change, two icons are shown on the corresponding menu page:
b Disk icon: Your settings are being saved. b X icon: The operation is being cancelled. Your
settings are not being saved.
Required fields
Fields with a red border are required fields. This means entries must be made in these fields to continue with the configuration.
devolo Magic 2 WiFi next
31 Network configuration
Help text blank fields
Fields that have not been filled in yet contain greyed out help text, which indicates the required content for the field. This help text disappears immediately once content has been entered.
Default settings
Some fields contain default settings which ensure the greatest amount of compatibility and ease of use. Default settings are identified with an * in drop-down menus.
Default settings can of course be replaced with customised information.
Invalid entries Entry errors are either highlighted by a red border or error messages are shown.
Buttons Click the Disk icon to save the settings for the respective web interface area.
Click the X icon or use the Menu path above the buttons to exit the respective web interface area.
Click the Recycle bin icon to delete an entry.
Click the Arrow icon to refresh a list.
Recommended settings Some fields include recommended settings.
Recommended settings can of course be replaced with customised information.
Tables
You can make changes within a table by clicking the corresponding table row in Time Control and Parental Control. In edit mode, the corresponding table rows have a blue background. In edit mode, the corresponding table rows have a blue background.
devolo Magic 2 WiFi next
Network configuration 32
4.3 Overview
The Overview area shows the status of the devolo Magic 2 WiFi next and the connected LAN, PLC and Wi-Fi devices.
4.3.2 Wi-Fi
2.4 GHz Current channel: used frequency channel in the 2.4-GHz frequency range
Enabled SSID: name of the enabled Wi-Fi network
Connected Wi-Fi clients: number of devices connected to the network.
5 GHz
Current channel: used frequency channel in the 5GHz frequency range
Enabled SSIDs: Name of the enabled Wi-Fi networks
Connected Wi-Fi clients: number of devices connected to the network.
4.3.1 System
Name: Device name Serial number: Device serial number Firmware version: Firmware version of the device
4.3.3 Powerline
Local device Network: status information "connected" or "not connected"
Network Connected clients: number of devices connected to the Powerline network
devolo Magic 2 WiFi next
33 Network configuration
4.3.4 LAN
IPv4
Protocol: Display indicating whether DHCP is switched on or switched off
4.4 Wi-Fi
Make all changes to your wireless network in the Wi-Fi area.
Address: IPv4 address in use Subnet mask: IPv4 network mask in use Default gateway: IPv4 gateway in use Name server: DNSv4 server in use
IPv6
Protocol: Display indicating whether DHCPv6 is switched on or switched off
Address/subnet: Address/subnet mask in use
devolo Magic 2 WiFi next
4.4.1 Status
You can see the current status of your Wi-Fi network configuration here, e.g. the connected Wi-Fi stations, the MAC address, the selected frequency band, the SSID, the transfer rates and the connection duration.
4.4.2Wi-Fi networks
You can make all necessary changes to your Wi-Fi network here.
Network configuration 34
Wi-Fi network mode The devolo Magic 2 WiFi next supports both the parallel operation of the Wi-Fi frequency bands and their separate use.
devolo Magic 2 WiFi next
35 Network configuration
The Wi-Fi network mode field lets you define your preferred setting by clicking the respective field:
b 2.4 GHz + 5 GHz Both frequency bands are used
b 2.4 GHz Only the 2.4 GHz frequency band is used
b 5 GHz Only the 5 GHz frequency band is used
b Off If desired, you can completely switch off
the
Wi-Fi
section
of
your
devolo Magic 2 WiFi next here.
Keep in mind that after saving this setting, you
will be disconnected from any existing wireless
connection to the devolo Magic 2 WiFi next. In
this case, configure the device over Ethernet.
Network name
The network name (SSID) determines the name of your wireless network. You can see this name when logging onto the Wi-Fi, allowing you to identify the correct Wi-Fi network.
Channels
There are 13 channels available in the 2.4 GHz frequency band. The channels recommended for Europe are channels 1, 6 and 11. This ensures the frequency bands of the channels do not overlap and any connection problems are avoided.
There are 19 channels available in the 5 GHz frequency band.
The channel selection default setting is Automatic.
The devolo Magic 2 WiFi next regularly and automatically executes the channel selection in this setting. In other words, if the last connected station logs out, a search for a suitable channel is carried out immediately. If no stations are connected, the device automatically selects a channel every 15 minutes.
It is worth noting that connected devices also have to support the increased frequency band of 5 GHz. From channel 52 onward you go into the radar range. When accessing the device for the first time, a radar detection phase (DFS) starts automatically, during which time the devolo Magic 2 WiFi next cannot be accessed via Wi-Fi. This can take up to 10 minutes.
In the Channel field, you can manually select a 2.4 GHz and a 5 GHz channel. If you are not sure which wireless channels are used by nearby devices, select the Automatic option.
devolo Magic 2 WiFi next
Network configuration 36
Hide SSID:
The SSID specifies the name of your wireless network. You can see this name when logging onto the Wi-Fi, allowing you to identify the correct subnet.
If the Hide SSID option is disabled, your network name is visible. If this option is disabled, potential network users must know the exact SSID and enter it manually to be able to set up a connection.
Some Wi-Fi stations have difficulty connecting to hidden wireless networks. If the connection to a hidden SSID poses problems, first try to set up the connection with a visible SSID and only then try to hide it.
4.4.3 Guest network
If you have friends or acquaintances visiting and you want to provide them with Internet access but without giving away the password for your Wi-Fi, you can set up a separate guest account in addition to the main Internet connection. The guest account can have its own network name, time limit and Wi-Fi password. This way your visitors can browse the Internet without having access to your local network.
Security
The WPA/WPA2/WPA3 Personal (Wi-Fi Protected Access) security standard is available for securing data transmission in your wireless network. This method allows for individualised keys consisting of letters and numbers and the depicted special characters with a length of up to 63 characters. You can simply enter them into the Key field via the keyboard.
To set up a guest account, activate the Enable option.
devolo Magic 2 WiFi next
37 Network configuration
The guest account has an Automatic shutoff feature. This feature automatically disables the guest network once the selected time period ends.
You can use the Enable option to activate the shut-off feature.
You can also enable or disable the guest account in the devolo Home Network App using the Guest account button.
Frequency band
In the Frequency band field, you select the frequency band mode you are using (see Chapter WiFi network mode).
Network name
Define the name of the guest network in the Network name field.
Key
You should also encrypt the guest account to prevent anyone in signal range from intruding into your network and, for example, sharing your Internet connection. The WPA/WPA2/WPA3 (Wi-Fi Protected Access) security standard is available for this.
This method allows for individualised keys consisting of letters and numbers with a length of up
to 63 characters. You can simply enter them via the keyboard.
To do so, enter a corresponding number of characters into the Key field.
QR code
Using the QR code, you can conveniently set up the connection to the guest network for mobile devices. Scanning the QR code automatically transfers the credentials for the guest network to the respective mobile device. The QR code is visible only if the guest network has been enabled.
4.4.4 Mesh
Mesh
All devolo Magic Wi-Fi adapters offer mesh Wi-Fi, which entails completely new and improved Wi-Fi functions:
b Multi-user MIMO technology More often than not, you use multiple end devices in your Wi-Fi network, such as a smartphone, tablet, smart TV or a game console. This can present a real challenge for your Wi-Fi network--it has to regulate the distribution of data streams from the Wi-Fi access point (e.g. router, devolo device) to the end devices.
devolo Magic 2 WiFi next
Multi-user MIMO technology makes it possible for your devolo device to supply your smartphone, tablet and other devices with data streams simultaneously--at the speed you require and at an efficient transfer rate. Thanks to Multi-user MIMO technology, you can finally enjoy using the Internet without long wait times during online gaming, sporadic drop-outs while streaming in HD or slow downloads.
b Fast roaming (IEEE 802.11r) streamlines the registration process for Wi-Fi end devices, such as smartphones or tablets, when switching to another Wi-Fi hotspot.
The feature Fast roaming is not compatible with all Wi-Fi clients. If there will be connection problems with one of your devices, please deactivate these option.
In factory default condition of the devolo Magic 2 WiFi next Fast roaming is turned off by default.
b In addition, the new air-time fairness feature processes the requests of high-speed Wi-Fi clients at higher priority. This prevents older devices, which may require more time for a download, from creating Wi-Fi bottlenecks.
Network configuration 38
b The access-point steering feature (AP steering) function enhances your Wi-Fi access point by adding intelligent network optimisation. This function actively helps your end devices connect to the optimal network access point. If the Wi-Fi access point identifies another Wi-Fi access point within your own network that has a stronger signal and better reception, it redirects the end device to that point automatically.
In particular, older smartphones, tablets and the like will remain connected to their Wi-Fi access point (e.g. router, devolo device) until the signal gets interrupted. Only then will they switch to a new Wi-Fi access point with better reception.
b Integrated band steering ensures that all Wi-Fi stations automatically switch to the optimum frequency band (2.4 and 5 GHz frequency band) in order to use the best Wi-Fi connection at all times.
In order to turn the mesh functions on, activate the Enable option.
The mesh function of the devolo Magic 2 WiFi next is switched on by default.
devolo Magic 2 WiFi next
39 Network configuration
4.4.5 Schedule control
The Schedule control area lets you define when and if your Wi-Fi is switched on and off.
WiFi Clone
WiFi Clone makes it possible to simply copy the Wi-Fi configuration data of an existing Wi-Fi access point (e.g. your Wi-Fi router) to all Wi-Fi access points (Single SSID). Start the procedure with the Start Configuration option and then press the WPS button of the device with the Wi-Fi access data (SSID and Wi-Fi password) to be applied.
Enabling Wi-Fi schedule control In order to be able to use time control, activate the Enable option.
Configuration You can define multiple time periods during which your wireless network is to be enabled for each
devolo Magic 2 WiFi next
weekday. Then the time control automatically switches the wireless network on or off.
Automatic disconnection
If you enable the Automatic disconnection option, the wireless network is not switched off until the last station has logged off.
Manually switching the device on and off (using a button) always has priority over automatic time control. The configured time control then takes effect automatically during the next defined time period.
4.4.6Parental control
You can regulate Wi-Fi access for specific devices based on time using this function. For instance, to prevent your children from using the Internet excessively, you can define how long they may use the Wi-Fi per day. Synchronisation with an (Internet) time server is necessary to be able to use the parental control. In this case, the time server (System Management Time Server (NTP)) for the devolo Magic 2 WiFi next ac has to be enabled and an active Internet connection is also required.
Network configuration 40
The time server pool.ntp.org is enabled by default. You can find more information in Chapter 4.7.2 Management.
If you would like to set up a time quota (usage time in hours) or a time period (active from/to), activate the Enable option. Now enter the MAC addresses of the devices you want to set up parental control for.
Under Type, define either a time quota (time limit) or a time period for when you want the MAC addresses entered to receive Internet access. Under Select interval, select the desired time frame.
devolo Magic 2 WiFi next
41 Network configuration
Setting the time quota Under Time Quota, the time limit can be selected. Confirm your settings by clicking the Disk icon.
Setting the time period
Under Time Period, the desired time period can be selected. After entering the interval, enter the desired start and end times in hour and minute format.
Confirm your settings by clicking the Disk icon.
If you want to delete a time quota (time limit) or a time period from the list, click/touch the dustbin icon.
4.4.7Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is one of the international encryption standards developed by the Wi-Fi Alliance for easily and quickly setting up a secure wireless network. The encryption keys of the respective Wi-Fi devices are transmitted automatically and continuously to the other Wi-Fi device(s) in the wireless network.
Enabling WPS encryption
In order to be able to use WPS encryption, activate the Enable option.
The devolo Magic 2 WiFi next offers two different variants for transmitting these encryption keys:
WPS using WPS pushbutton
1 Start the encryption process on the devolo Magic 2 WiFi next
a By pressing the Wi-Fi button on the front side of the device or
a By pressing the corresponding Start button on the user interface under Wi-Fi WPS Pushbutton.
2 Then either press the WPS key of the Wi-Fi device you are adding or enable the WPS mechanism in the Wi-Fi settings of the Wi-Fi device. Now the devices exchange their encryption keys and establish a secure Wi-Fi connec-
devolo Magic 2 WiFi next
tion. The Wi-Fi LED on the front panel indicates the synchronisation process by flashing.
WPS via PIN
To interconnect Wi-Fi devices in your wireless network securely using a PIN variant, go to the web interface and, under Wi-Fi WPS WPS PIN, enter the WPS PIN generated by your Android smartphone or tablet and start the encryption process by pressing the corresponding Start button.
Use of the WPS method implies the use of the WPA/WPA2 encryption standard. Therefore take note of the following automatic settings:
b If under Wi-Fi Wi-Fi networks, the No encryption option is selected in advance, WPA2 is set automatically. The newly generated password is displayed under Wi-Fi Wi-Fi networks in the Key field.
b If under Wi-Fi Wi-Fi networks, the WPA/ WPA2 option is selected in advance, this setting remains with the previously assigned password.
Network configuration 42
4.4.8 Neighbour networks
The Neighbour networks area displays visible wireless networks in your surroundings.
devolo Magic 2 WiFi next
43 Network configuration
4.5 Powerline
Make all changes to your PLC network in the Powerline area.
In order to use a new devolo Magic 2 WiFi next in your devolo Magic network, first you have to connect it to your existing devolo Magic adapters devices as a network. This is accomplished by using a shared password. This can be assigned in different ways:
b Using
devolo Cockpit
or
the
devolo Home Network App (see Chapter 3.4
Installation of devolo software),
b Only using the PLC button (see Chapter 2.3 Pairing Establishing a PLC connection and
3.3
Connecting
the
devolo Magic 2 WiFi next)
b Using the web interface, in the PLC menu; as described below:
Pairing Using on-screen button
1 Click Start pairing to start the pairing operation. This may take some time.
2 As soon as the new devolo Magic adapter is integrated into your existing network, it appears in a list of available and established connections.
Pairing Using custom password
You can also assign your network a custom PLC password you pick yourself. Enter this password for each devolo Magic adapter in the Network password field and confirm your settings by clicking the Disk icon.
Note that the custom password is not assigned to the whole PLC network automatically. Instead, you must assign it separately to each of your devolo Magic adapters.
Unpairing Removing an adapter from a network
1 To remove a devolo Magic adapter from your devolo Magic network, click Leave Powerline network.
devolo Magic 2 WiFi next
2 Wait until the LED flashes red and then disconnect the devolo Magic adapter from the mains supply.
Compatibility mode
Using as VDSL connection may negatively impact the performance of the bandwidth connection by crosstalk of the signal.
Network configuration 44
and set the compatibility mode as well as the signal transmission profile manually:
b MIMO a Full power a VDSL 17a (default) a VDSL 35b
b SISO a Full power a VDSL 17a (default) a VDSL 35b Get in touch with your internet provider to find out which signal transmission profile is the best option for your internet connection.
In order to mitigate any potential negative effects the device provides the following options:
Automatic compatibility mode If the option Automatic compatibility mode (recommended) is enabled, the device can automatically adjust the output signal to avoid interference as much as possible. This option is configured by default.
Manual compatibility mode If an interference has not been eliminated despite activating the automatic setting, please disable it
The MIMO operating mode and the VDSL 17a signal transmission profile are configured by default.
devolo Magic 2 WiFi next
45 Network configuration
Connections
The table lists all available and connected devolo Magic adapters for your network along with displaying the following details:
4.6 LAN
You make changes to the network settings in the LAN area.
Device ID: Device ID* (number) of the respective devolo Magic adapter in the devolo Magic network
* indicates the local devolo Magic adapter
MAC address: MAC address of the respective devolo Magic adapter
Send (Mbps): Rate for sending data
Receive (Mbps): Rate for receiving data
devolo Magic 2 WiFi next
4.6.1 Status
You can see the current LAN status of the devolo Magic adapters here. The Ethernet area shows the network devices connected to the two
network connectors Port 1 and Port 2 (e.g. PC, NAS, etc.).
IPv4/IPv6
Depending on how the devolo Magic 2 WiFi next is connected to the Internet (IPv4 or IPv6), current network information is displayed, such as Address, Subnet mask, Standard gateway and DNS server.
4.6.2IPv4/IPv6 configuration
In the factory default settings, only the Retrieve network settings from a DHCP server option for IPv4 is enabled. This means that the IPv4 address is retrieved automatically from a DHCP server. The currently assigned network data are visible (greyed out).
If a DHCP server is already present on the network for assigning IP addresses (e.g. your Internet router), you should leave the Retrieve network settings from a DHCP server option enabled so that the devolo Magic 2 WiFi next automatically receives an address from it.
If you want to assign a static IP address, make entries accordingly for the Address, Subnet mask, Default gateway and DNS server fields.
Confirm your settings by clicking the Disk icon.
Network configuration 46
Then, restart the devolo Magic adapter (see Chapter 4.7.3 Configuration) to ensure that your changes take effect.
IPv6 configuration If you want automatic IP address assignment and there is already a DHCP server present on the network for assigning IP addresses (e.g. your Internet router), enable the Retrieve network settings from a DHCP server option to ensure that the devolo Magic 2 WiFi next automatically receives an address from it.
If you want to assign a static IP address, make entries accordingly for the Address, Subnet mask, Default gateway and DNS server fields.
Confirm your settings by clicking the Disk icon.
4.7 System
In the System area, you can configure the settings for security and other devolo Magic adapter device functions.
4.7.1 Status
Here you can view the most important information on the devolo Magic adapter, including the current date and time, time zone, MAC address of the
devolo Magic 2 WiFi next
47 Network configuration
adapter, status of the Wi-Fi and Powerline LEDs and the two operating buttons.
Under Change access password, a login password can be set for accessing the web interface.
By default, the built-in web interface of the
devolo Magic 2 WiFi next is not protected by a
password. We recommend assigning a password
when
the
installation
of
the
devolo Magic 2 WiFi next is complete to protect it
against tampering by third parties.
To do so, enter the desired new password twice. Now the web interface is protected against unauthorised access with your custom password!
4.7.2 Management
System information lets you enter user-defined names in the Device name (hostname) and Device location fields. Both pieces of information are particularly helpful if multiple devolo Magic adapters are to be used and identified in the network.
In Power Management, you can enable Powersave mode and Standby mode on the devolo Magic 2 WiFi next.
If Powersave mode has been enabled, the devolo Magic 2 WiFi next switches to PowerSave mode automatically whenever reduced data transmission over ethernet is detected.
The latency (time for transmitting a data packet) may be negatively affected.
If Standby mode is enabled, the devolo Magic 2 WiFi next automatically switches to Standby mode if no ethernet connection has
devolo Magic 2 WiFi next
been enabled, i.e. if no network device (e.g. computer) is switched on and connected to the network interface and if Wi-Fi is disabled.
In this mode, the devolo Magic 2 WiFi next is not accessible over the Powerline network. As soon as the network device (e.g. computer) connected to the network interface is switched on again, your adapter can also be accessed over the electrical wiring again.
Powersave mode is disabled in the devolo Magic 2 WiFi next factory default settings.
Standby mode is enabled in the devolo Magic 2 WiFi next factory default condition.
The LED settings let you disable the LED status display of the Wi-Fi and Powerline LEDs.
An error status is indicated by corresponding flashing behaviour regardless of this setting.
For information on the LED behaviour of the devolo Magic adapter in standby mode, refer to Chapter 2.3.1 Reading the PLC indicator light.
You can completely disable the operating buttons on the devolo Magic adapter in order to pro-
Network configuration 48
tect yourself against possible changes. Simply disable the Enable PLC button or Enable Wi-Fi button option.
The operating buttons are enabled in the devolo Magic 2 WiFi next factory default settings.
Under Time zone, you can select the current time zone, e.g. Europe/Berlin. The Time server (NTP) option lets you specify a time server. A time server is a server on the Internet whose task consists of providing the exact time. Most time servers are coupled with a radio clock. Select your time zone and time server; the devolo Magic 2 WiFi next automatically switches between standard time and summer time.
4.7.3 Configuration
Saving the device configuration
To save the enabled configuration to your computer as a file, select the corresponding button in the System Configuration Save Configuration to File area. The system starts downloading the current device configuration.
Restoring the device configuration
An existing configuration file can be sent to the devolo Magic 2 WiFi next in the System Confi-
devolo Magic 2 WiFi next
49 Network configuration
guration area and enabled there. Select a suitable file via the Select file ... button and start the operation by clicking the Restore button.
Factory Settings
The devolo Magic 2 WiFi next is reset to the original factory defaults in the System Configuration area with the Factory Reset option.
Doing so causes you to lose your personal Wi-Fi and PLC settings. The last-assigned passwords for the devolo Magic 2 WiFi next are also reset.
For backup purposes, all active configuration settings can be transmitted to your computer, stored there as a file and reloaded into the devolo Magic 2 WiFi next. This function can be useful for creating a variety of configurations that will let you quickly and easily set up the device for use in different network environments.
Reboot device
In order to reboot the devolo Magic 2 WiFi next, select the Reboot button in the System Configuration area.
4.7.4 Firmware
The firmware of the devolo Magic 2 WiFi next includes the software for operating the device. If necessary, devolo offers new versions on the Internet as a file download, for example to modify existing functions.
Current firmware
The currently installed firmware of the devolo Magic 2 WiFi next is displayed here.
Searching for and updating firmware automatically
The adapter can also look for up-to-date firmware automatically. To do this, enable the Regulary check for firmware updates option.
The devolo Magic 2 WiFi next lets you know when a new firmware version becomes available. The option is enabled by default.
The Automatically install firmware updates option allows the adapter to automatically install the firmware it has found.
The devolo Magic 2 WiFi next automatically updates its firmware. The option is enabled by default.
devolo Magic 2 WiFi next
Download updated firmware
1 If you have downloaded an updated firmware file for the devolo Magic 2 WiFi next to your computer, navigate to the System Firmware Update firmware area. Click Browse ... and select the downloaded file.
2 Confirm the update procedure with Update firmware. After a successful update, the devolo Magic 2 WiFi next restarts automatically.
Ensure that the update procedure is not interrupted.
4.7.5Config Sync
Config Sync allows settings to be configured uniformly for all devolo Magic devices in the network. This includes the following settings e.g.:
b Wi-Fi network b Guest network b Mesh Wi-Fi b Time control and time server settings.
In order to switch Config Sync on, activate the Enable option.
Network configuration 50 Please note that the Wi-Fi is always switched on or off for the entire network. Therefore, stop Config Sync first on a device that you want to configure or switch separately.
devolo Magic 2 WiFi next
51 Appendix
5 Appendix
5.1 Technical specifications
Security
128 Bit AES
Device port
2x RJ45 (Gigabit Ethernet port)
Power consumption Maximum: 12.1 W Typical: 8.9 W Stand-by: 3.1 W
Power supply
internal 196-250 V AC 50 Hz
Temperature (Stora- -25°C to 70 °C / 0°C to
ge/Operating)
40°C
Dimensions (in mm, 152x76x40 (HxWxD) without plug)
Ambient conditions 10-90% Humidity, noncondensing
Certifications
CE
5.2 Bandwidth optimization
To significantly improve the transmission capacity of the network, we recommend that you comply with the following "connection rules":
b Plug the devolo Magic 2 WiFi next directly into a wall socket. Avoid using power strips. This may impair the transmission of the PLC signals.
b If there are several sockets in the wall directly next to each other, they behave like a power strip. Individual sockets are optimal.
devolo Magic 2 WiFi next
Fig.5: devolo Magic bandwidth optimization
5.3 Frequency range and transmitting power
Technical specifications in the 5 GHz frequency range
Frequency range IEEE standard
5 GHz
802.11 a/h 802.11 n 802.11 ac
Appendix 52
Frequency range 5 GHz
Max.
indoor 200 mW (channel 36 64)
transmission po- / 23 dBm
wer (EIRP)
Max. transmitting 1,000 mW (channel 100
power
140) / 30 dBm
Technical specifications in the 2.4-GHz frequency range
Indoor frequency range
Indoor & outdoor frequency range
5150 5350 MHz
5150 5725 MHz (802.11 a/h, n) 5150 5350 MHz / 5470 5725 MHz (802.11 ac)
Channel width
band-
20 MHz (802.11 a/h) 20 MHz, 40 MHz (802.11 n) 20 MHz, 40 MHz, 80 MHz, 160 MHz (802.11 ac)
Frequency range IEEE standard
2.4 GHz
802.11 b 802.11 g 802.11 n
Indoor frequency range
Indoor & outdoor 2399.5 2484.5 MHz frequency range
Channel width
band- 20 MHz (802.11 b/g) 20 MHz, 40 MHz (802.11 n)
devolo Magic 2 WiFi next
53 Appendix
Frequency range 2.4 GHz
Max. indoor trans- 100 mW / 20 dBm mission power (EIRP)
Max. transmitting 100 mW / 20 dBm power
devolo Magic 2 WiFi next
5.4 Channels and carrier frequencies
Channels and frequencies in the 5-GHz band
Channel 36 40 44 48 52 56 60 64 100 104 108 112 116
Carrier frequency 5180 MHz 5200 MHz 5220 MHz 5240 MHz 5260 MHz 5280 MHz 5300 MHz 5320 MHz 5500 MHz 5520 MHz 5540 MHz 5560 MHz 5580 MHz
Appendix 54
Channel 120 124 128 132 136 140
Carrier frequency 5600 MHz 5620 MHz 5600 MHz 5660 MHz 5680 MHz 5700 MHz
Channels and frequencies in the 2.4 GHz band
Channel Carrier frequency
1
2412 MHz
2
2417 MHz
3
2422 MHz
4
2427 MHz
5
2432 MHz
6
2437 MHz
7
2442 MHz
devolo Magic 2 WiFi next
55 Appendix
Channel Carrier frequency
8
2447 MHz
9
2452 MHz
10
2457 MHz
11
2462 MHz
12
2467 MHz
13
2472 MHz
5.5 Disposal of old devices
To be used in the countries of the European Union and other European countries with a separate collecting system:
The icon with crossed-out wastebasket on the device means that this product is an electrical or electronic device that falls within the scope of application of the European Community WEEE Directive. These types of devices may no longer be disposed of with household waste. Rather they can be given to a municipal collection point free of charge. Contact your municipal government to find out the address and hours of the nearest collection point.
devolo Magic 2 WiFi next
5.6 Warranty conditions
If your devolo device is found to be defective during initial installation or within the warranty period, please contact the vendor who sold you the product. The vendor will take care of the repair or warranty claim for you. The complete warranty conditions can be found at www.devolo.global/support.
Appendix 56
devolo Magic 2 WiFi next
Index
A
Access Point Steering 38 Adapter equipment 14
Air-time fairness 13, 38 B Band steering 13, 38 C
CE 9
Changing/assigning the network password 15, 26
Config Sync 50
D
Default WiFi key 20 devolo App 27 devolo Cockpit 27 devolo Magic 12 devolo software 27 DHCP server 46 Disposal of old devices 55 Dynamic Frequency Selection 13
E
Expanding an existing devolo Magic network 15
F Factory default settings 23, 28 I
Integrated electrical socket 23
Intended use 9 IPv4 46
L
LAN (network connection) 23 LED status display 14 Login password 29
M
Mesh 37
Multi-user MIMO technology 13, 37 N
Network connection 23
O
Operating buttons 48
P
Package contents 24 Pairing (establishing a PLC connection) 14 PLC 12 PLC status display 17 Powerline 12
R Reset 14, 23 Roaming 13, 38 S
Safety notes 10 SSID 36 Starting up a new devolo Magic network 15 Symbol description 7
devolo Magic 2 WiFi next
System requirements 24
T
Time server 48
W
Wi-Fi antenna 23 WiFi Clone 39 Wi-Fi status display 21
WPA/WPA2/WPA3 36, 37
devolo Magic 2 WiFi next