IKEA LÄRBRO Mirror Assembly Instructions

Important Information

As wall materials vary, screws for fixing to the wall are not included. For advice on suitable screw systems, contact your local specialized dealer.

The following languages are covered in this document:

• English
• German
• French
• Dutch
• Danish
• Icelandic
• Norwegian
• Finnish
• Swedish
• Czech
• Spanish
• Italian
• Hungarian
• Polish
• Estonian
• Latvian
• Lithuanian
• Portuguese
• Romanian
• Slovak
• Bulgarian
• Croatian
• Greek
• Russian
• Ukrainian
• Serbian
• Slovenian
• Turkish
• Chinese (Simplified)
• Chinese (Traditional)
• Korean
• Japanese
• Indonesian
• Malay
• Arabic
• Thai
• Vietnamese

Tools and Parts

Tools required (not included): Screwdriver, hammer, measuring tape, spirit level.

Included parts: The package contains the mirror and mounting hardware. Specific quantities of parts are indicated in the diagrams.

Assembly Steps

Step 1: Preparation

Unpack all components and check against the parts list. Ensure you have a clear workspace.

Diagram showing unpacking and checking parts.

Step 2: Wall Mounting Preparation

Determine the desired location for the mirror. Use a measuring tape and spirit level to mark the mounting points on the wall according to the mirror's dimensions. Ensure the marks are level.

Diagram showing measuring and marking the wall.

Step 3: Attaching Brackets to the Wall

Using appropriate screws (not included) for your wall type, attach the mounting brackets to the wall at the marked locations. Ensure the brackets are securely fastened and level.

Diagram showing attaching brackets to the wall with screws.

Step 4: Attaching Brackets to the Mirror

Attach the corresponding brackets to the back of the mirror using the provided screws. Ensure they are aligned correctly with the mounting points.

Diagram showing attaching brackets to the mirror.

Step 5: Mounting the Mirror

Carefully lift the mirror and align the brackets on the mirror with the brackets on the wall. Slide the mirror into place until it is securely seated.

Diagram showing lifting and mounting the mirror onto the wall brackets.

Step 6: Final Adjustments

Check that the mirror is stable and properly aligned. Make any necessary adjustments.

Diagram showing final adjustments.

Care Instructions

Wipe clean with a damp cloth. Wipe dry with a clean cloth. Check regularly that all mounting fixings are suitably tightened.