FOLLOWSPOT 200ST User Manual

Edition Notes

The Followspot 200ST User Manual includes a description, safety precautions, installation, programming, operation, and maintenance instructions for the Followspot 200ST as of the release date of this edition.

Trademarks

Chauvet, Chauvet DJ, the Chauvet logo, and Followspot are registered trademarks or trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other company and product names and logos referred to herein may be trademarks of their respective companies.

Copyright Notice

The works of authorship contained in this manual, including, but not limited to, all designs, text, and images are owned by Chauvet. © Copyright 2025 Chauvet & Sons, LLC. All rights reserved. Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes its customers to download and print this manual for professional information purposes only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this manual or its content for any other purpose without written consent from Chauvet.

Document Printing

For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4 paper (210 x 297 mm), configure the printer to scale the content accordingly.

Intended Audience

Any person installing, operating, and/or maintaining this product should completely read through the guide that shipped with the product, as well as this manual, before installing, operating, or maintaining this product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However, Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss, damage, or disruption caused by any errors or omissions in this document, whether such errors or omissions result from negligence, accident, or any other cause. Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision; however, Chauvet has no obligation to make, and does not commit to make, any such revisions.

Document Revision

Go to www.chauvetdj.com for the latest version.

1. Before You Begin

What Is Included

• Followspot 200ST
• Power cable
• Tripod
• Quick Reference Guide

Unpacking Instructions

Carefully unpack the product immediately and check the container to make sure all the parts are in the package and are in good condition.

Claims

If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate a claim. In addition, keep the box and contents for inspection. For other issues, such as missing components or parts, damage not related to shipping, or concealed damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

Safety Notes

These Safety Notes include important information about installation, use, and maintenance of the Followspot 200ST.

ALWAYS:

• Connect to a grounded circuit.
• Connect to operating voltages as specified on the product's spec sticker.
• Disconnect from power before replacing the fuse.
• Disconnect from its power source during periods of inactivity.
• Heed all restrictions and warnings on the spec sticker.
• Mount in a location with at least 20 in (50 cm) of ventilation.
• Replace the fuse with the same type and rating.
• In the event of a serious operating problem, stop using immediately.

DO NOT:

• Open this product or attempt any repairs. It contains no user-serviceable parts.
• Look at the light source when the product is on.
• Use if the power cable is crimped or damaged.
• Disconnect by pulling on the power cable.
• Allow flammable materials close to the product when it is operating.
• Touch the housing when it is on.
• Block any ventilation holes/slots in the housing.
• Connect to a dimmer or rheostat.
• Carry the product by its power cable.
• Operate in temperatures higher than 104°F (40°C).
• Expose to environments that exceed the Ingress Protection (IP) rating.
• Expose to rain or moisture.
• Use outdoors.
• Submerge.
• Set this product on a flammable surface.

Keep this User Manual for future use. If the product is sold to someone else, be sure that they also receive this document.

2. Introduction

Product Overview

The Followspot 200ST has the following components:

• 1. Preset color menu: Controls preset color selection.
• 2. Fuse holder: Houses the fuse for power protection.
• 3. LED control menu: Controls LED functions like on/off and strobe.
• 4. Iris control lever: Adjusts the iris of the light beam.
• 5. LCD display: Shows menu options and status.
• 6. Menu buttons: Navigation buttons for the LCD display.
• 7. Power on/off: Main power switch.
• 8. DMX in/out: Connectors for DMX control.
• 9. Bracket adjustment knob: Allows for aiming the fixture.
• 10. Focus adjustment knob: Adjusts the focus of the light beam.
• 11. Power in: Connector for the power cable.
• 12. Zoom adjustment knob: Adjusts the beam spread (zoom).

Product Dimensions

The product dimensions are:

• Length: 22.9 inches (582 mm)
• Width: 11 inches (279 mm)
• Height: 8.5 inches (216 mm)
• Depth (from front lens to rear mounting bracket): 10.6 inches (268 mm)
• Bracket height (from base to top of bracket): 5.4 inches (138 mm)

3. Setup

AC Power

The Followspot 200ST has an auto-ranging power supply and operates with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine specific power requirements (circuit breaker, power outlet, wiring), consult the product's back panel label or the specifications chart. The current rating indicates the average current draw under normal conditions.

• ⚠️ Always connect the product to a protected circuit (circuit breaker or fuse). Ensure appropriate electrical grounding to prevent electrocution or fire.
• ℹ️ To minimize wear and extend lifespan, disconnect the product from power during periods of non-use by unplugging it or switching off the breaker.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if it functions as a 0-100% switch.

Fuse Replacement

1. Disconnect the product from power.
2. Using a flat-head screwdriver, unscrew the fuse holder and pull it out.
3. Replace the blown fuse with one of the exact same type and rating.
4. Re-insert the fuse holder and reconnect power.

⚠️ Disconnect the product from the power outlet before replacing the fuse.

⚠️ Always replace a blown fuse with one of the same type and rating.

Mounting

Before mounting, read and follow the safety recommendations in the Safety Notes.

Orientation

Once mounted, ensure adequate ventilation is provided around the Followspot 200ST.

Rigging

• Before selecting a location, ensure easy access for maintenance and programming.
• The bracket adjustment knobs allow for directional adjustment. Loosen or tighten these knobs manually; using tools may cause damage.
• When mounting on the floor, keep the product and cables clear of people and vehicles.

Mounting Diagram Description

The diagram shows the Followspot 200ST mounted on a tripod. It indicates:

• Tripod insertion point w/ adjustment knob for tightening: Where the fixture's yoke attaches to the tripod.
• Bracket adjustment knobs: Knobs on the yoke used to tilt and aim the fixture.

4. Operation

Control Panel Operation

Use the four buttons below the display to access control panel functions. Refer to the Product Overview for button locations.

Menu Map

Refer to the Followspot 200ST product page on www.chauvetdj.com for the latest menu map and software.

DMX Configuration

The Followspot 200ST works with a DMX controller. Information about DMX is available in the Chauvet DMX Primer, which can be downloaded from chauvetlighting.com/downloads/ (DMX_Primer_rev05_WO.pdf).

Personality and Starting Address

The Followspot 200ST uses up to 3 DMX channels in 3-channel DMX mode, with the highest configurable address being 510. When selecting a starting DMX address, consider the number of DMX channels the mode uses; setting the address too high may restrict access to some channels.

To select the personality and starting address:

1. Press <DMX> to display the DMX address.
2. Use <UP> or <DOWN> to select the starting address (001–510).

DMX Channel Assignments and Values

DMX Charts

Manual Configuration

Ensure the product is in manual mode to operate without a DMX controller.

ℹ️ Never connect a product operating in standalone mode to a DMX string connected to a controller. Standalone mode products may transmit interfering DMX signals.

Dimmer Control

To dim the Followspot 200ST:

1. Use <+> to increase the dimmer from 000–100.
2. Use <-> to decrease the dimmer from 000–100.

LED Control

Blackout

1. Press <BLACKOUT> to turn off the LED.
2. Press <ON> to turn on the LED when blackout is activated.

Strobe

1. Hold <ON> for 3 seconds to activate the strobe effect.

Color Wheel

To use a preset color:

1. Press the preset color menu buttons: Orange, Blue, Red, Green, Magenta, Yellow, CTO, or White.

Color Wheel Calibration Mode

To calibrate the color wheel:

1. Press and hold <MANUAL> for 6 seconds, or until the calibration value appears on the display.
2. Use <UP> or <DOWN> to adjust the calibration value until the color wheel is aligned.
3. Press and hold <MANUAL> for 6 seconds to exit.

5. Maintenance

Product Maintenance

Dust build-up can reduce light output, cause overheating, shorten the light source's life, and lead to mechanical wear. To maintain optimum performance and minimize wear, clean all lighting products at least twice a month. Usage and environmental conditions may require more frequent cleaning.

To clean the product:

1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust from external surfaces/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint-free cotton cloth or lens cleaning tissue.
6. Gently drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.

ℹ️ Always dry the transparent surfaces carefully after cleaning them.

⚠️ Do not spin the cooling fans using compressed air, as they could be damaged.

6. Technical Specifications

Dimensions and Weight

Note: Dimensions in inches are rounded.

Power

Power I/O

Light Source

Photometrics

Thermal

DMX

Ordering

Logos: UKCA, CE, RoHS compliant.

Contact Us

General Information

Chauvet World Headquarters

Address: 3360 Davie Rd., Suite 509, Davie, FL 33314

Voice: (954) 577-4455

Fax: (954) 929-5560

Toll Free: (800) 762-1084

Chauvet U.K.

Address: Pod 1 EVO Park, Little Oak Drive, Sherwood Park, Nottinghamshire, NG15 0EB, UK

Voice: +44 (0) 1773 511115

Fax: +44 (0) 1773 511110

Chauvet Benelux

Address: Vaartlaan 9, 9800 Denize, Belgium

Voice: +32 9 388 93 97

Chauvet France

Address: 3, Rue Ampère, 91380 Chilly-Mazarin, France

Voice: +33 1 78 85 33 59

Chauvet Germany

Address: Bruno-Bürgel-Str. 11, 28759 Bremen, Germany

Voice: +49 421 62 60 20

Chauvet Mexico

Address: Av. de las Partidas 34 - 3B (Entrance by Calle 2), Zona Industrial Lerma, Lerma, Edo. de México, CP 52000

Voice: +52 (728) 690-2010

Technical Support

Voice: (844) 393-7575

Fax: (954) 756-8015

Email: chauvetcs@chauvetlighting.com

Website: www.chauvetdj.com

Email: UKtech@chauvetlighting.eu

Website: www.chauvetdj.eu

Email: BNLtech@chauvetlighting.eu

Website: www.chauvetdj.eu

Email: FRtech@chauvetlighting.fr

Website: www.chauvetdj.eu

Email: DEtech@chauvetlighting.de

Website: www.chauvetdj.eu

Email: servicio@chauvet.com.mx

Website: www.chauvetdj.mx

Warranty & Returns

For warranty terms and conditions and return information, please visit our website.

For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.

For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration.