Argon Audio Stream 3MK2

Environmental Care

Argon Audio is committed to environmental responsibility. By providing a concise quick start guide instead of a full printed manual, over 20 tons of paper are saved annually. A comprehensive User Manual in PDF format is available on the Argon Audio website: www.argonaudio.com.

Safety Instructions

Please read the following safety instructions carefully before using the Argon Audio Stream 3MK2:

• Unplug the product from the wall outlet before cleaning. Do not use near water or moisture. Avoid spilling liquids on the product. Clean only with a dry cloth.
• Place the unit on a solid surface.
• Do not place the unit in a closed bookcase or cabinet that may obstruct ventilation openings.
• Do not install near heat sources such as radiators, heat registers, stoves, or other heat-producing appliances.
• Protect the power cord from being walked on or pinched, especially at the plug and where it exits the product.
• During lightning storms, unplug the product from the power source. If unused for long periods, unplugging also prevents lightning and power-line surge damage.
• Do not attempt to service the product yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Contact the manufacturer for referral to an authorized service center.
• Do not overload wall outlets, extension cords, or integral power circuits, as this can result in fire or electric shock.
• Never insert objects through product openings, as this can cause fire, electric shock, or damage.
• Use proper power sources. Plug the product into a power source as described in the operating instructions or marked on the product.

CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN.

A lightning flash symbol with an arrowhead indicates the presence of un-insulated "dangerous voltage" within the product, which may pose a risk of electric shock.

An exclamation point symbol alerts the user to important operating and maintenance information found in the user manual.

Quick Start Setup

1. Ensure your Wi-Fi network is available.
2. Connect the antenna cable to the Stream 3 MK2.
3. Connect the Stream 3 MK2 to your device using the optical or RCA output.
4. Plug the power supply into an electric outlet and into the back of the Stream 3 MK2.
5. Upon connection, the Stream 3 MK2 will start up automatically and guide you through a setup process.
6. In the setup guide, select your desired settings by using the [arrow-button] buttons on the remote and confirm your choices by pressing the [select-button].
7. The final setup step is entering the Wi-Fi code. Use the [arrow-button] buttons to select letters/numbers for the password, confirming each character with the [select-button]. Once the password is fully entered, navigate to the "OK" area on the display using the [arrow-button] buttons and press the [select-button] to confirm. The Stream 3 MK2 will then connect to your network.

Basic Operation

1. Use the [mode-button] to switch between modes: Internet Radio, Music Player, DAB, FM, AUX, Spotify, and Bluetooth.
2. In Internet Radio mode, press the [menu-button] to access the Internet Radio Menu. To view station lists, select "Station List" from the Menu and press the [select-button].
3. To see available stations, select "Stations" and press the [select-button]. You can then search and list stations by various criteria. Confirm your selection using the [select-button].
4. When entering DAB mode for the first time, the Stream 3 MK2 will automatically search for available DAB stations.
5. DAB stations can be selected by pressing the [arrow-button] buttons.
6. Once a preferred station is found, press the [select-button] to play it.
7. Automatic station search in FM mode is performed by pressing and holding the [autotune-button].
8. To store a station in DAB or FM mode on a preset button, press and hold the desired preset button for 3 seconds while the station is playing. The display will show "Preset stored" upon successful storage.
9. In Bluetooth mode, activate Bluetooth on your phone, tablet, or laptop. Search for "new device", add your Stream 3 MK2, and pair. The Stream 3 MK2 will then be connected and ready for playback.

Spotify Connect

Use your phone, tablet, or computer as a remote control for Spotify. Visit spotify.com/connect to learn more.

The Spotify Software is subject to third-party licenses, which can be found at: https://www.spotify.com/connect/third-party-licenses.

A full user manual in PDF format for this product is available on www.argonaudio.com.