Hilti HIT-HY 200-AV3-RV3 Declaration of Performance
Product Overview
This document consolidates the Declarations of Performance for the Hilti HIT-HY 200-AV3-RV3 system, a concrete injection anchoring system and metal anchors for concrete.
1. Unique Product Identification Code
Product Type: HIT-HY 200-AV3-RV3 rebar anchoring system / HIT-HY 200-AV3-RV3 concrete injection system for concrete.
2. Intended Use(s)
| Product | Intended Use |
|---|---|
| Mortar injection system for post-installed rebar | Product for the fixing or the connection/support of building structures |
| Metal anchors for use in concrete | Product for the fixing or the connection/support of building structures |
3. Manufacturer
Hilti Aktiengesellschaft, Business Unit Anchors, 9494 Schaan, Principality of Liechtenstein
4. AVCP System(s)
System 1
5. European Assessment Documents
CPR 2873-CPR-201-55:
- European Technical Assessment (ETA): EAD 330087-01-0601, ETA-19/0600 (valid until 15.07.2025)
- Technical Assessment Body: DIBt - Deutsches Institut für Bautechnik
- Notified Body: 2873 - IFSW Darmstadt
CPR 2873-CPR-201-56:
- European Technical Assessment (ETA): EAD 330499-02-0601, ETA-19/0601 (valid until 29.01.2024)
- Technical Assessment Body: DIBt - Deutsches Institut für Bautechnik
- Notified Body: 2873 - IFSW Darmstadt
CPR 2873-CPR-201-60:
- European Technical Assessment (ETA): EAD 332402-00-0601-v01, ETA-19/0665 (valid until 29.06.2023)
- Technical Assessment Body: ITC - CNR
- Notified Body: 2873 - IFSW Darmstadt
6. Declared Performance(s)
Mechanical Resistance and Stability (Requirement 1)
| Fundamental Requirement | Performance |
|---|---|
| Characteristic resistance for static and quasi-static loads, displacements | See Annexes C1, C2, C3 (CPR 201-55); See Annexes B3 - B7, C1 - C19 (CPR 201-56) |
| Characteristic resistance for seismic performance category C1 | See Annexes C20, C21, C22 (CPR 201-56) |
| Characteristic resistance for seismic performance category C2, displacements | See Annexes C23, C24 (CPR 201-56) |
| Resistance to combined pull-out/slip and concrete cone failure in non-cracked concrete | See Annex C1 (CPR 201-60) |
| Resistance to concrete cone failure in non-cracked concrete | See Annex C1 (CPR 201-60) |
| Robustness | See Annex C1 (CPR 201-60) |
| Resistance to pull-out failure | See Annex C1 (CPR 201-60) |
| Influence of cracked concrete on resistance to combined pull-out/slip and concrete cone failure | See Annex C1 (CPR 201-60) |
Safety in Case of Fire (Requirement 2)
| Fundamental Requirement | Performance |
|---|---|
| Reaction to fire | The anchors comply with the requirements of Class A1 (CPR 201-55 & 201-56) |
| Fire resistance | See Annexes C6, C7 (CPR 201-55); See Annexes C25 - C28 (CPR 201-56) |
Declaration Statement
The performances of the product identified above are in conformity with the declared performances. In accordance with Regulation (EU) No 305/2011, this declaration of performance is issued under the sole responsibility of the manufacturer mentioned above.
Signatures
Signed for and on behalf of the manufacturer:
| Lars Taenzer | Jürgen Gebhard |
| Head of Business Unit, Business Unit Anchor | Quality Manager, Business Unit Anchor |
