Owner's Manual for AROMA models including: AG-30 Electric Guitar AMP, AG-30, Electric Guitar AMP, Guitar AMP, AMP

RD-BZ-AG-30英文说明书240319

UM

Aroma Music Co., Ltd. AG-30 2APP6AG-30 2APP6AG30 ag 30

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=7300677
AG-30

 A0 A1

  FCCUKCA

256*176mm 

ELECTRIC GUITAR AMP AG-30

PANEL FUNCTION

OVERDRIVE

EQUALIZER

2023
SAFETY INSTRUCTIONS
If the fuse is accidentally ruptured, use the spare part of the fuse slot. Do not use another conductor to connect the fuse or use fuse which does not fit the device.
Reach out to qualified person if the device has problems. Please turn to qualified person if any of below happens: power cord or power plug damages, liquid or mental gets into the device.

1 2 3 4 5 6 7 8 9 10

11

12

13 14 15

AG-30
ELECTRIC GUITAR AMP

Specified Voltage Used

OPERATION.

Contains Transmitter Module
210-207398
FCC ID: 2APP6AG-30

1

CLEAN VOLUME

2

CLEAN/OVERDRIVE

3

OVERDRIVE GAIN

4

OVERDRIVE VOLUME

5

BASS

6

MIDDLE

7

TREBLE

8

REVERB

9

LED INDICATOR

10

BLUETOOTH

11

POWER JACK

12

POWER SWITCH

13

3.5MM HEADPHONE JACK

14

3.5MM AUX INPUT

15

6.35MM INPUT

FEATURES

8" loud speaker, 30W
With analog OVERDRIVE and CLEAN tone
With EQ and REVERB control knobs Bluetooth inside for convenient connection with your smart phones or other devices with bluetooth function With headphone jack and AUX input

OPERATION.

HOW TO USE

AG-30
ELECTRIC GUITAR AMP

Specified Voltage Used

Contains Transmitter Module
210-207398
FCC ID: 2APP6AG-30

PANEL CONTROL
After connecting the instrument, adjust each knob to the appropriate position, the adjustable knobs are as follows.  CLEAN VOLUME
Turn the knob to change the volume of clean.  CLEAN/OVERDRIVE
Change the signal between clean and overdrive.  OVERDRIVE GAIN
With higher gain, the overdrive will be harder.

 OVERDRIVE VOLUME Turn the knob to change the volume of overdrive channel.
 BASS This controls the low frequancy.
 MIDDLE This controls the middle frequancy.
 TREBLE This controls the high frequancy.
 REVERB Adjust the sound effect of reverb.
BLUETOOTH FUNCTION
Connect bluetooth, press and hold button" ". The blue indicator will be on, which means the bluetooth turned on. The amp name is"AG-30". A beep sound"Di"will be gendered when bluetooth connection succeed. * Playing music from AUX IN or bluetooth, the volume can only be adjusted by external device.
SPECIFIATIONS
Input jack: 6.35mmx1 Input impedance: 10Kohm Reverb typePLATE Tone switchCLEAN, OVERDRIVE VolumeCLEAN volume, OVERDRIVE volume GainOVERDRIVE gain EQBASS, MIDDLE, TREBLE Headphone jack3.5mm stereo output AUX input3.5mm mono input Peak output: 30W Speaker: 8" loud speaker Bluetooth version: 5.0 Input220V~50Hz Dimension: 370×230×326mm Weight: 7.3kg
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
MADE IN CHINA

1.5.03.0254100 70g

 A1  



AG-30



  

20240319  AROMA-RD-BZ-02


Adobe PDF library 16.03