msi MAG X570S Tomahawk Max WiFi User Guide

User Guide for msi models including: MAG X570S Tomahawk Max WiFi

1963bc86d204c8ed29663d131f92c39eae91

. ∙ Keep this user guide for future reference. ∙ Keep this motherboard away from humidity. ∙ Make sure that your electrical outlet provides the same voltage as is indicated on the PSU, before connecting the PSU to the

Quick Start - Geizhals Static Content

Quick Start. Thank you for purchasing the MSI MAG X570S TOMAHAWK MAX WIFI/ MAG X570S. TORPEDO MAX motherboard. This Quick Start section provides ...

MSI MAG X570S Tomahawk Max WIFI Manual

File Info : application/pdf, 58 Pages, 5.15MB

1963bc86d204c8ed29663d131f92c39eae91

Quick Start
Thank you for purchasing the MSI® MAG X570S TOMAHAWK MAX WIFI/ MAG X570S TORPEDO MAX motherboard. This Quick Start section provides demonstration diagrams about how to install your computer. Some of the installations also provide video demonstrations. Please link to the URL to watch it with the web browser on your phone or tablet. You may have even link to the URL by scanning the QR code.
Preparing Tools and Components

AMD® AM4 CPU

CPU Fan

DDR4 Memory

Power Supply Unit

Chassis Graphics Card

Thermal Paste

SATA Hard Disk Drive

SATA DVD Drive

Phillips Screwdriver

A Package of Screws
Quick Start 1

Safety Information
The components included in this package are prone to damage from electrostatic discharge (ESD). Please adhere to the following instructions to ensure successful computer assembly. Ensure that all components are securely connected. Loose connections may cause the computer to not recognize a component or fail to start. Hold the motherboard by the edges to avoid touching sensitive components. It is recommended to wear an electrostatic discharge (ESD) wrist strap when handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is not available, discharge yourself of static electricity by touching another metal object before handling the motherboard. Store the motherboard in an electrostatic shielding container or on an anti-static pad whenever the motherboard is not installed. Before turning on the computer, ensure that there are no loose screws or metal components on the motherboard or anywhere within the computer case. Do not boot the computer before installation is completed. This could cause permanent damage to the components as well as injury to the user. If you need help during any installation step, please consult a certified computer technician. Always turn off the power supply and unplug the power cord from the power outlet before installing or removing any computer component. Keep this user guide for future reference. Keep this motherboard away from humidity. Make sure that your electrical outlet provides the same voltage as is indicated on the PSU, before connecting the PSU to the electrical outlet. Place the power cord such a way that people can not step on it. Do not place anything over the power cord. All cautions and warnings on the motherboard should be noted. If any of the following situations arises, get the motherboard checked by service personnel:
Liquid has penetrated into the computer. The motherboard has been exposed to moisture. The motherboard does not work well or you can not get it work according to user guide. The motherboard has been dropped and damaged. The motherboard has obvious sign of breakage. Do not leave this motherboard in an environment above 60°C (140°F), it may damage the motherboard.
2 Quick Start

Case stand-off notification
To prevent damage to the motherboard, any unnecessary mounting stand-off between the motherboard circuits and the computer case is prohibited. The Case standoff keep out zone signs will be marked on the backside of motherboard (as shown below) to serve as a warning to user.
Avoid collision notification
Protective paint is printed around each screw hole to prevent parts from being scratched.
Quick Start 3

Installing a Processor
https://youtu.be/Xv89nhFk1vc
3 2

1 5
4

6 4 Quick Start

8 9
7

Important
If you are installing the screw-type CPU heatsink, please follow the figure below to remove the retention module first and then install the heatsink.

Quick Start 5

Installing DDR4 memory
http://youtu.be/T03aDrJPyQs

DIMMA2
6 Quick Start

DIMMA2 DIMMB2

DIMMA1 DIMMA2 DIMMB1 DIMMB2

Connecting the Front Panel Header
http://youtu.be/DPELIdVNZUI

POPWOEWRELREHLDD-EDDL+ED

RESET SW POWER SW

Power LED Power Switch

JFP1

2 1

10
9
Reserved

HDD LED Reset Switch

HDD LED +

HDD LED -

Reset Switch

Reserved

Power LED + Power LED Power Switch Power Switch
No Pin

HDD LED POWER LED

HDD LED RESET SW

JFP1
HDD LED HDD LED + POWER LED POWER LED +
Quick Start 7

Installing the Motherboard
1

https://youtu.be/wWI6Qt51Wnc
Torque: 3 kgf·cm*
2
BAT1
*3 kgf·cm = 0.3 N·m = 2.6 lbf·in
8 Quick Start

Connecting the Power Connectors
http://youtu.be/gkDYyR_83I4

ATX_PWR1

CPU_PWR1

CPU_PWR2

Quick Start 9

Installing SATA Drives
http://youtu.be/RZsMpqxythc
2

1 3

5 4
10 Quick Start

Installing a Graphics Card
http://youtu.be/mG0GZpr9w_A
1

5 4
6 Quick Start 11

Connecting Peripheral Devices
MAG X570S TOMAHAWK MAX WIFI Processor with integrated graphics
12 Quick Start

MAG X570S TORPEDO MAX Processor with integrated graphics
Quick Start 13

Power On

3 4
14 Quick Start

Contents
Quick Start ............................................................................................................. 1 Preparing Tools and Components.......................................................................... 1 Safety Information .................................................................................................. 2 Case stand-off notification ..................................................................................... 3 Avoid collision notification...................................................................................... 3 Installing a Processor............................................................................................. 4 Installing DDR4 memory ........................................................................................ 6 Connecting the Front Panel Header....................................................................... 7 Installing the Motherboard..................................................................................... 8 Connecting the Power Connectors......................................................................... 9 Installing SATA Drives........................................................................................... 10 Installing a Graphics Card .................................................................................... 11 Connecting Peripheral Devices ............................................................................ 12 Power On............................................................................................................... 14
Specifications....................................................................................................... 17
Package contents ................................................................................................ 24
Block Diagram .................................................................................................... 25
Rear I/O Panel...................................................................................................... 26 LAN Port LED Status Table................................................................................... 27 Audio Ports Configuration .................................................................................... 27 Realtek Audio Console ......................................................................................... 28
Overview of Components .................................................................................... 31 CPU Socket ........................................................................................................... 33 DIMM Slots............................................................................................................ 34 PCI_E1~4: PCIe Expansion Slots.......................................................................... 35 M2_1~2: M.2 Slots (Key M) ................................................................................... 36 SATA1~6: SATA 6Gb/s Connectors ....................................................................... 38 JFP1, JFP2: Front Panel Connectors ................................................................... 38 CPU_PWR1~2, ATX_PWR1: Power Connectors ................................................... 39 CPU_FAN1, PUMP_FAN1, SYS_FAN1~4: Fan Connectors................................... 40 JUSB1~2: USB 2.0 Connectors............................................................................. 41 JUSB3~4: USB 3.2 Gen 1 5Gbps Connectors ....................................................... 41 JUSB5: USB 3.2 Gen 2 10Gbps Type-C Connector............................................... 42 JAUD1: Front Audio Connector ............................................................................ 42 JCI1: Chassis Intrusion Connector....................................................................... 43 JTPM1: TPM Module Connector........................................................................... 43 JCOM1: Serial Port Connector ............................................................................. 44
Contents 15

JBAT1: Clear CMOS (Reset BIOS) Jumper ........................................................... 44 JPWRLED1: LED power input............................................................................... 45 EZ Debug LED....................................................................................................... 45 JRGB1~2: RGB LED connectors ........................................................................... 46 JRAINBOW1~2: Addressable RGB LED connectors............................................. 47 Installing OS, Drivers & MSI Center.................................................................... 48 Installing Windows® 10 ....................................................................................... 48 Installing Drivers .................................................................................................. 48 MSI Center ............................................................................................................ 48 UEFI BIOS............................................................................................................. 49 BIOS Setup ........................................................................................................... 50 Entering BIOS Setup............................................................................................. 50 BIOS User Guide ................................................................................................... 50 Resetting BIOS...................................................................................................... 51 Updating BIOS....................................................................................................... 51 RAID Configuration.............................................................................................. 53 Troubleshooting .................................................................................................. 54
16 Contents

Specifications

CPU Chipset Memory
Expansion Slot

Supports AMD RyzenTM 5000 Series, 5000 G-Series, 4000 G-Series, 3000 Series, 3000 G-Series, 2000 Series and 2000 G-Series desktop processors* Supports Socket AM4
* Please go to msi.com to get the newest support status as new processors are released.
AMD X570 Chipset
4x DDR4 memory slots, support up to 128GB Supports 1866/ 2133/ 2400/ 2667/ 2800/ 2933/ 3000/ 3066/ 3200 MHz by JEDEC* Max overclocking frequency by A-XMP OC mode:
For RyzenTM 5000 G-Series & 4000 G-Series processors
1DPC 1R Max speed up to 5100 MHz 1DPC 2R Max speed up to 4000 MHz 2DPC 1R Max speed up to 4266 MHz 2DPC 2R Max speed up to 3600 MHz For RyzenTM 5000 Series & 3000 Series processors 1DPC 1R Max speed up to 5100 MHz 1DPC 2R Max speed up to 3866 MHz 2DPC 1R Max speed up to 4000 MHz 2DPC 2R Max speed up to 3600 MHz Supports Dual-Channel mode Supports non-ECC, un-buffered memory
*Please refer to www.msi.com for more information on compatible memory.
Supports PCIe 4.0 / PCIe 3.0 PCIe 4.0 is available only on AMD RyzenTM 5000 Series and 3000 Series desktop processors
1x PCIe x16 slot (From processor) PCI_E1 supports PCIe 4.0/ 3.0 x16 PCI_E1 supports PCIe 3.0 x8 on AMD RyzenTM 3000 Gand 2000 G- series desktop processors
1x PCIe x16 slot (From X570 chipset) PCI_E3 supports PCIe 4.0/ 3.0 x4
2x PCIe 3.0 x1 slots (From X570 chipset)
Continued on next page

Specifications 17

Onboard Graphics Multi-GPU LAN Wireless LAN & Bluetooth® (For MAG X570S TOMAHAWK MAX WIFI)
Storage
RAID Audio I/O Controller

Continued from previous page
1x HDMI 2.1 port, supports a maximum resolution of 4K 60Hz*/**
*Available only on processors featuring integrated graphics. ** Graphics specifications may vary depending on the CPU installed.
Supports AMD CrossFireTM Technology
1x Realtek® 8125B 2.5Gbps LAN Controller 1x Realtek® RTL8111H 1Gbps LAN Controller (For MAG X570S TORPEDO MAX)
Intel® Wi-Fi 6E AX210 The Wireless module is pre-installed in the M.2 (Key-E) slot Supports MU-MIMO TX/RX, 2.4GHz/ 5GHz/ 6GHz* (160MHz) up to 2.4Gbps Supports 802.11 a/ b/ g/ n/ ac/ ax Supports Bluetooth® 5.2**, FIPS, FISMA
* Wi-Fi 6E 6GHz may depend on every country's regulations and will be ready in WIN10 21H1. ** Bluetooth 5.2 will be ready in WIN10 21H1.
6x SATA 6Gb/s ports (from AMD X570 Chipset) 2x M.2 slots (Key M)
Supports PCIe 4.0 / PCIe 3.0 PCIe 4.0 is available only on AMD RyzenTM 5000 Series and 3000 Series desktop processors Supports up to SATA 6Gb/s M2_1 slot (from Processor)
Support 2280/22110 storage devices M2_2 slot (from AMD X570 Chipset)
Supports 2242/ 2260/ 2280 storage devices
Supports RAID 0, RAID 1 and RAID 10
Realtek® ALC4080 Codec 7.1-Channel High Definition Audio Supports S/PDIF output
NUVOTON NCT6797D Controller Chip
Continued on next page

18 Specifications

Continued from previous page

Hardware Monitor USB Back Panel Connectors

CPU/ System/ Chipset temperature detection CPU/ System/ Pump fan speed detection CPU/ System/ Pump fan speed control
AMD X570 Chipset 3x USB 3.2 Gen 2 10Gbps ports (2 Type-A ports on the back panel, 1 Type-C internal connector) 4x USB 3.2 Gen 1 5Gbps ports available through the internal USB 3.2 Gen 1 5Gbps connectors 1x USB 2.0 port on the back panel USB 2.0 Hub 5x USB 2.0 ports (1 Type-A port on the back panel, 4 ports available through the internal USB 2.0 connectors) AMD Processor 2x USB 3.2 Gen 2 10Gbps ports on the back panel (Type-A &Type-C) 2x USB 3.2 Gen 1 5Gbps Type-A ports on the back panel
1x Flash BIOS Button 1x PS/2 keyboard/ mouse combo port 2x USB 2.0 ports 2x Wi-Fi Antenna connectors (For MAG X570S TOMAHAWK MAX WIFI) 2x USB 3.2 Gen1 5Gbps Type-A ports 1x HDMI port 3x USB 3.2 Gen 2 10Gbps Type-A port 1x USB 3.2 Gen 2 10Gbps Type-C port 1x 2.5Gbps LAN port 1x 1Gbps LAN port (For MAG X570S TORPEDO MAX) 5x audio jacks 1x Optical S/PDIF Out connector
Continued on next page

Specifications 19

Continued from previous page

Internal Connectors

1x 24-pin ATX main power connector 1x 8-pin ATX 12V power connector 1x 4-pin ATX 12V power connector 6x SATA 6Gb/s connectors 2x USB 2.0 connectors (supports additional 4 USB 2.0 ports) 2x USB 3.2 Gen 1 5Gbps connectors (supports additional 4 USB 3.2 Gen 1 5Gbps ports) 1x USB 3.2 Gen 2 10Gbps Type-C port 1x 4-pin CPU fan connector 1x 4-pin water-pump connector 4x 4-pin system fan connectors 1x Front panel audio connector 2x System panel connectors 1x Chassis Intrusion connector 1x TPM module connector 1x Serial port connector 1x Chassis Intrusion connector

Jumpers

1x Clear CMOS jumper

LED Features

2x 4-pin RGB LED connectors 2x 3-pin RAINBOW LED connectors 4x EZ Debug LED 1X EZ LED Control switch

BIOS Features

1x 256 Mb flash UEFI AMI BIOS ACPI 6.1, SM BIOS 2.8 Multi-language

Form Factor

ATX Form Factor 12 in. x 9.6 in. (30.5 cm x 24.4 cm)
Continued on next page

20 Specifications

Software MSI Center Features Special Features

Continued from previous page
Drivers MSI Center CPU-Z MSI GAMING Open Broadcaster Software (OBS) MSI App Player (BlueStacks) Google ChromeTM, Google Toolbar, Google Drive NortonTM Internet Security Solution
Gaming Mode Smart Priority Game Highlights LAN Manager Mystic Light Ambient Link (For MAG X570S TOMAHAWK MAX WIFI) Frozr AI Cooling User Scenario True Color Live Update Monitor Super Charger Speed Up Smart Image Finder MSI Companion
Audio Audio Boost 5
Network 2.5G LAN 1G LAN (For MAG X570S TORPEDO MAX) Intel WiFi 6E (For MAG X570S TOMAHAWK MAX WIFI)
Continued on next page

Specifications 21

Special Features

Continued from previous page
Cooling M.2 Shield Frozr All Aluminum Design (For MAG X570S TOMAHAWK MAX WIFI) Extended Heatsink Design (For MAG X570S TORPEDO MAX) Pump Fan Smart Fan Control K7 thermal pad Choke pad
Storage Lightning Gen 4 M.2 Twin Turbo M.2
LED Mystic Light Mystic Light Extension (RAINBOW/RGB) Mystic Light SYNC Ambient Link (For MAG X570S TOMAHAWK MAX WIFI) EZ LED Control EZ DEBUG LED
Performance Lightning Gen 4 PCI-E Slot Multi GPU-CrossFire Technology DDR4 Boost Core Boost GAME Boost USB with type A+C USB 3.2 Gen 2 10G Front USB Type-C 2oz Copper thickened PCB Dual CPU Power
Continued on next page

22 Specifications

Special Features

Continued from previous page
Protection PCI-E Steel Armor Pre-installed IO shielding
Experience MSI Center Frozr AI Cooling Click BIOS 5 Flash BIOS Button

Specifications 23

Package contents

Please check the contents of your motherboard package. It should contain:

Motherboard Cable

MAG X570S TOMAHAWK MAX WIFI/ MAG X570S TORPEDO MAX

SATA 6Gb/s cable

Wi-Fi antenna (For MAG X570S TOMAHAWK MAX WIFI)

M.2 screw + standoff (2 sets/pack)

Accessories

Case badge

MAG Sticker

Product registration card

MSI Reward Program

Application DVD

USB drive with drivers & utilities

User manual

Documentation

Quick installation guide

Small screwdriver set

Gifts

Small brush

Important
If any of the above items are damaged or missing, please contact your retailer.

24 Package contents

Block Diagram

PCI_E1 PCIe x16

CPU

M2_1
PCI_E3 PCIe x4
PCI_E2 PCI_E4
M2_2 Realtek® 8125B Realtek® RTL8111H (For MAG X570S TORPEDO MAX)
WiFi AX210 (For MAG X570S TOMAHAWK MAX WIFI)

PCIEx4
Chipset

DDR4 2Channel DIMM A1/A2 DIMM B1/B2 USB 3.2 Gen 2 10Gbps USB 3.2 Gen 1 5Gbps
USB 3.2 Gen 2 10Gbps USB 3.2 Gen 1 5Gbps
USB 2.0 USB 2.0 Hub SATA1/2/3/4/5/6
MCU

HD Audio ALC4080

SPI

TPM

SIO 6797

Block Diagram 25

Rear I/O Panel

MAG X570S TOMAHAWK MAX WIFI

PS/2 Mouse/ Keyboard

USB 3.2 Gen1
(5Gbps) Type-A

2.5Gbps LAN

Audio Ports

Flash BIOS Port

Flash BIOS USB 2.0 Button Type-A Wi-Fi Antenna connectors

USB 3.2 Gen 2 USB 3.2 (10Gbps) Gen 2 Type-A (10Gbps) Type-C

Optical S/PDIF-Out

MAG X570S TORPEDO MAX

PS/2 Mouse/ Keyboard

USB 3.2 Gen1
(5Gbps) Type-A

1Gbps LAN 2.5Gbps LAN

Audio Ports

Flash BIOS Port

USB 2.0 Type-A
Flash BIOS Button

USB 3.2 Gen 2 USB 3.2 (10Gbps) Gen 2 Type-A (10Gbps) Type-C

Optical S/PDIF-Out

Flash BIOS Port/ Button - Please refer to page 52 for Updating BIOS with Flash BIOS Button.

26 Rear I/O Panel

LAN Port LED Status Table

Link/ Activity LED

Status Off Yellow Blinking

Description No link Linked Data activity

Audio Ports Configuration

Speed LED

Status Off Green Orange

Description 10 Mbps connection 100 Mbps/ 1 Gbps 2.5 Gbps connection

Audio Ports

Channel 2468

Center/ Subwoofer Out Rear Speaker Out

Line-In/ Side Speaker Out Line-Out/ Front Speaker Out

Mic In
(: connected, Blank: empty)

Rear I/O Panel 27

Realtek Audio Console
After Realtek Audio Console is installed. You can use it to change sound settings to get better sound experience.
Application Enhancement

Device Selection

Main Volume

Connector Settings Jack Status
Device Selection - allows you to select a audio output source to change the related options. The check sign indicates the devices as default. Application Enhancement - the array of options will provide you a complete guidance of anticipated sound effect for both output and input device. Main Volume - controls the volume or balance the right/left side of the speakers that you plugged in front or rear panel by adjust the bar. Jack Status - depicts all render and capture devices currently connected with your computer. Connector Settings - configures the connection settings.
Auto popup dialog When you plug into a device at an audio jack, a dialogue window will pop up asking you which device is current connected.

Each jack corresponds to its default setting as shown on the next page.
Important
The pictures above for reference only and may vary from the product you purchased.
28 Rear I/O Panel

Audio jacks to headphone and microphone diagram
Audio jacks to stereo speakers diagram
AUDIO INPUT
Audio jacks to 7.1-channel speakers diagram
AUDIO INPUT Rear Front Side Center/
Subwoofer
Rear I/O Panel 29

Installing antennas 1. Screw the antennas tight to the antenna connectors as shown below. 2. Orient the antennas.
1
2
30 Rear I/O Panel

Overview of Components

CPU_PWR2 CPU_PWR1

Processor Socket

JRAINBOW2 JRGB2

CPU_FAN1

PUMP_FAN1 SYS_FAN2 SYS_FAN1

ATX_PWR1

M2_1
PCI_E1
PCI_E2 PCI_E3
M2_2 JCI1 PCI_E4

JUSB5 DIMMB2 DIMMB1 DIMMA2 DIMMA1 SATA 1 2
SATA 3 4

BAT1

SATA 5 6

JUSB4
JFP2 JRAINBOW1

JAUD1 JRGB1
JTPM1

SYS_FAN3

JPWRLED1 JFP1 JBAT1
JUSB3 JUSB2

SYS_FAN4 JUSB1 JCOM1

Overview of Components 31

Component Contents

Port Name

Port Type

CPU_FAN1, PUMP_FAN1, SYS_FAN1~4

Fan Connectors

CPU_PWR1~2, ATX_PWR1 Power Connectors

CPU Socket

AM4 CPU Socket

DIMM Slots

Memory slots

JAUD1

Front Audio Connector

JBAT1

Clear CMOS (Reset BIOS) Jumper

JCI1

Chassis Intrusion Connector

JCOM1

Serial Port Connector

JFP1, JFP2

Front Panel Connectors

JPWRLED1

LED power input

JRAINBOW1~2

Addressable RGB LED connectors

JRGB1~2

RGB LED connectors

JTPM1

TPM Module Connector

JUSB1~2

USB 2.0 Connectors

JUSB3~4

USB 3.2 Gen 1 5Gbps Connectors

JUSB5

USB 3.2 Gen 2 10Gbps Type-C Connector

M2_1~2

M.2 Slots (Key M)

PCI_E1~4

PCIe Expansion Slots

SATA1~6

SATA 6Gb/s Connectors

Page
40
39 33 34 42 44 43 44 38 45 47 46 43 41 41 42 36 35 38

32 Overview of Components

CPU Socket

Distance from the center of the CPU to the nearest DIMM slot.

53.5 mm
Introduction to the AM4 CPU The surface of the AM4 CPU has a yellow triangle to assist in correctly lining up the CPU for motherboard placement. The yellow triangle is the Pin 1 indicator.
Important
When changing the processor, the system configuration could be cleared and reset BIOS to default values, due to the AM4 processor's architecture. Always unplug the power cord from the power outlet before installing or removing the CPU. When installing a CPU, always remember to install a CPU heatsink. A CPU heatsink is necessary to prevent overheating and maintain system stability. Confirm that the CPU heatsink has formed a tight seal with the CPU before booting your system. Overheating can seriously damage the CPU and motherboard. Always make sure the cooling fans work properly to protect the CPU from overheating. Be sure to apply an even layer of thermal paste (or thermal tape) between the CPU and the heatsink to enhance heat dissipation. If you purchased a separate CPU and heatsink/ cooler, Please refer to the documentation in the heatsink/ cooler package for more details about installation. This motherboard is designed to support overclocking. Before attempting to overclock, please make sure that all other system components can tolerate overclocking. Any attempt to operate beyond product specifications is not recommended. MSI® does not guarantee the damages or risks caused by inadequate operation beyond product specifications.
Overview of Components 33

DIMM Slots

DIMMA1

DIMMB1

Channel A

Channel B

DIMMA2
Memory module installation recommendation

DIMMB2

DIMMA2

DIMMA2 DIMMB2

DIMMA1 DIMMA2 DIMMB1 DIMMB2

Important
Always insert memory modules in the DIMMA2 slot first. To ensure system stability for Dual channel mode, memory modules must be of the same type, number and density. Some memory may operate at a lower frequency than the marked value when overclocking due to the memory frequency operates dependent on its Serial Presence Detect (SPD). Go to BIOS and find the DRAM Frequency to set the memory frequency if you want to operate the memory at the marked or at a higher frequency. It is recommended to use a more efficient memory cooling system for full DIMMs installation or overclocking. The stability and compatibility of installed memory module depend on installed CPU and devices when overclocking. Please refer www.msi.com for more information on compatible memory.

34 Overview of Components

PCI_E1~4: PCIe Expansion Slots
PCI_E1: PCIe x16 slot (CPU)

BAT1

PCI_E2: PCIe x1 slot (Chipset)

PCI_E3: PCIe x4 slot (Chipset)

PCI_E4: PCIe x1 slot (Chipset)

Slots

AMD RyzenTM 5000/ 3000 series
processors

AMD RyzenTM 5000 AMD RyzenTM 3000

G-/ 4000 G-/ 2000 G-/ 2000 G- series

series processors

processors

PCI_E1 (CPU) PCI_E2 (Chipset) PCI_E3 (Chipset) PCI_E4 (Chipset)

PCIe 4.0 x16 PCIe 3.0 x1 PCIe 4.0 x4 PCIe 3.0 x1

PCIe 3.0 x16 PCIe 3.0 x1 PCIe 3.0 x4 PCIe 3.0 x1

PCIe 3.0 x8 PCIe 3.0 x1 PCIe 3.0 x4 PCIe 3.0 x1

Important
If you install a large and heavy graphics card, you need to use a tool such as MSI Gaming Series Graphics Card Bolster to support its weight to prevent deformation of the slot. For a single PCIe x16 expansion card installation with optimum performance, using the PCI_E1 slot is recommended. When adding or removing expansion cards, always turn off the power supply and unplug the power supply power cable from the power outlet. Read the expansion card's documentation to check for any necessary additional hardware or software changes.

Overview of Components 35

M2_1~2: M.2 Slots (Key M)

Video Demonstration
Watch the video to learn how to Install M.2 SSD. https://youtu.be/2UeWMgjwogU

M2_1 (CPU)

M2_2 (Chipset)

Installing M.2 module 1. Loosen the screws of M.2 SHIELD FROZR heatsink. 2. Remove the M.2 SHIELD FROZR and remove the protective films from the thermal
pads.

1
1 1

36 Overview of Components

3. Secure the supplied M.2 standoff according to your M.2 SSD length if need. 4. Insert your M.2 SSD into the M.2 slot at a 30-degree angle. 5. Secure the M.2 SSD in place with the supplied M.2 8.5H screw.
Important
Skip step 3 and step 5, if you install 22110 M.2 into M2_1 slot or install 2280 M.2 into M2_2 slot.

M.2 screw
5
M.2 standoff
3

4
30º

heatsink standoff

6. Put the M.2 SHIELD FROZR heatsink back in place and secure it.

6
6 6
6

Overview of Components 37

SATA1~6: SATA 6Gb/s Connectors
These connectors are SATA 6Gb/s interface ports. Each connector can connect to one SATA device.

SATA2 SATA1 SATA4 SATA3 SATA6 SATA5

Important
Please do not fold the SATA cable at a 90-degree angle. Data loss may result during transmission otherwise. SATA cables have identical plugs on either sides of the cable. However, it is recommended that the flat connector be connected to the motherboard for space saving purposes.
JFP1, JFP2: Front Panel Connectors
These connectors connect to the switches and LEDs on the front panel.
Power LED Power Switch

JFP1

2 1

10
9
Reserved

HDD LED Reset Switch

HDD LED +

HDD LED -

Reset Switch

Reserved

Power LED + Power LED Power Switch Power Switch
No Pin

JFP2 1

+ -
+

Buzzer 1

Speaker -

Speaker 3

Buzzer -

Buzzer + Speaker +

38 Overview of Components

CPU_PWR1~2, ATX_PWR1: Power Connectors
These connectors allow you to connect an ATX power supply.

8 4

5 1

CPU_PWR1

Ground

+12V +12V +12V +12V

4 2

3 1

CPU_PWR2

Ground

+12V +12V

+3.3V

Ground

+5V

Ground

+5V

ATX_PWR1

Ground

PWR OK

5VSB

+12V

+3.3V

+3.3V -12V Ground PS-ON# Ground Ground Ground Res +5V +5V +5V Ground

Important
Make sure that all the power cables are securely connected to a proper ATX power supply to ensure stable operation of the motherboard.

Overview of Components 39

CPU_FAN1, PUMP_FAN1, SYS_FAN1~4: Fan Connectors
Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode. PWM Mode fan connectors provide constant 12V output and adjust fan speed with speed control signal. DC Mode fan connectors control fan speed by changing voltage. You can follow the instruction below to adjust the fan connector to PWM or DC Mode.

CPU_FAN1

PUMP_FAN1 SYS_FAN2 SYS_FAN1

Connector

CPU_FAN1 PUMP_FAN1 SYS_FAN1~4

Default fan mode
Auto mode PWM mode DC mode

Max. current
2A 2A 1A

Max. power
24W 36W 12W

SYS_FAN3

SYS_FAN4

Switching fan mode and adjusting fan speed

You can switch between PWM mode and DC mode and adjust fan speed in BIOS > HARDWARE MONITOR.

Select PWM mode or DC mode

There are gradient points of the fan speed that allow you to adjust fan speed in relation to CPU temperature.
Important
Make sure fans are working properly after switching the PWM/ DC mode.

Pin definition of fan connectors

PWM Mode pin definition

Ground

+12V

Sense

Speed Control Signal

DC Mode pin definition

Ground

Voltage Control

Sense

40 Overview of Components

JUSB1~2: USB 2.0 Connectors
These connectors allow you to connect USB 2.0 ports on the front panel.

VCC

USB0-

USB0+

Ground

No Pin

VCC USB1USB1+ Ground
NC

Important
Note that the VCC and Ground pins must be connected correctly to avoid possible damage. In order to recharge your iPad,iPhone and iPod through USB ports, please install MSI Center utility.

JUSB3~4: USB 3.2 Gen 1 5Gbps Connectors
These connectors allow you to connect USB 3.2 Gen 1 5Gbps ports on the front panel.

JUSB4

JUSB3

Power

USB2.0+

USB3_RX_DN

USB2.0-

USB3_RX_DP

Ground

USB3_TX_C_DP

USB3_TX_C_DN

USB3_TX_C_DP

Ground

USB3_RX_DP

USB2.0-

USB3_RX_DN

USB2.0+

Power

No Pin

Important
Note that the Power and Ground pins must be connected correctly to avoid possible damage.

Overview of Components 41

JUSB5: USB 3.2 Gen 2 10Gbps Type-C Connector
This connector allows you to connect USB 3.2 Gen 2 10Gbps Type-C connector on the front panel. The connector possesses a foolproof design. When you connect the cable, be sure to connect it with the corresponding orientation.

JUSB5

USB Type-C Cable

USB Type-C port on the front panel

JAUD1: Front Audio Connector
This connector allows you to connect audio jacks on the front panel.

MIC L

Ground

MIC R

Head Phone R

MIC Detection

SENSE_SEND

No Pin

Head Phone L

Head Phone Detection

42 Overview of Components

JCI1: Chassis Intrusion Connector
This connector allows you to connect the chassis intrusion switch cable.

Normal (default)

Trigger the chassis intrusion event

Using chassis intrusion detector 1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis. 2. Close the chassis cover. 3. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration. 4. Set Chassis Intrusion to Enabled. 5. Press F10 to save and exit and then press the Enter key to select Yes. 6. Once the chassis cover is opened again, a warning message will be displayed on
screen when the computer is turned on.
Resetting the chassis intrusion warning 1. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration. 2. Set Chassis Intrusion to Reset. 3. Press F10 to save and exit and then press the Enter key to select Yes.

JTPM1: TPM Module Connector
This connector is for TPM (Trusted Platform Module). Please refer to the TPM security platform manual for more details and usages.

SPI Power

3 Master In Slave Out (SPI Data) 4

Reserved

Ground

Reserved

SPI Chip Select Master Out Slave In (SPI Data)
SPI Clock SPI Reset
No Pin Interrupt Request

Overview of Components 43

JCOM1: Serial Port Connector
This connector allows you to connect the optional serial port with bracket.

DCD

SIN

SOUT

DTR

Ground

DSR

RTS

CTS

No Pin

JBAT1: Clear CMOS (Reset BIOS) Jumper
There is CMOS memory onboard that is external powered from a battery located on the motherboard to save system configuration data. If you want to clear the system configuration, set the jumper to clear the CMOS memory.

Keep Data (default)

Clear CMOS/ Reset BIOS

Resetting BIOS to default values 1. Power off the computer and unplug the power cord 2. Use a jumper cap to short JBAT1 for about 5-10 seconds. 3. Remove the jumper cap from JBAT1. 4. Plug the power cord and power on the computer.

44 Overview of Components

JPWRLED1: LED power input
This connector is used by retailers to demonstrate onboard LED light effects.
JPWRLED1 - LED power input
EZ Debug LED
These LEDs indicate the debug status of the motherboard. CPU - indicates CPU is not detected or fail. DRAM - indicates DRAM is not detected or fail. VGA - indicates GPU is not detected or fail. BOOT - indicates the booting device is not detected or fail.
Overview of Components 45

JRGB1~2: RGB LED connectors
The JRGB connectors allow you to connect the 5050 RGB LED strips 12V.

+12V

RGB LED Strip Connection
1

GR B

JRGB connector

RGB extension cable (optional)

RGB LED Fan Connection
JRGB connector
1

5050 RGB LED strips 12V

GR B

1
System Fan connector

RGB LED Fan

Important
An JRGB connector supports up to 2 meters continuous 5050 RGB LED strips (12V/G/R/B) with the maximum power rating of 3A (12V). Always turn off the power supply and unplug the power cord from the power outlet before installing or removing the RGB LED strip. Please use MSI's software to control the extended LED strip.

46 Overview of Components

JRAINBOW1~2: Addressable RGB LED connectors
The JRAINBOW connectors allow you to connect the WS2812B Individually Addressable RGB LED strips 5V.

+5V

3 No Pin 4

Data Ground

Addressable RGB LED Strip Connection
1

+5V
D

JRAINBOW connector

Rainbow RGB LED extension cable (optional)

Addressable RGB LED Fan Connection

JRAINBOW connector

WS2812B Individually Addressable RGB LED strips 5V

System Fan connector

Addressable RGB LED Fan

CAUTION
Do not connect the wrong type of LED strips. The JRGB connector and the JRAINBOW connector provide different voltages, and connecting the 5V LED strip to the JRGB connector will result in damage to the LED strip.

Important
The JRAINBOW connector supports up to 75 LEDs WS2812B Individually Addressable RGB LED strips (5V/Data/Ground) with the maximum power rating of 3A (5V). In the case of 20% brightness, the connector supports up to 200 LEDs. Always turn off the power supply and unplug the power cord from the power outlet before installing or removing the RGB LED strip. Please use MSI's software to control the extended LED strip.

Overview of Components 47

Installing OS, Drivers & MSI Center
Please download and update the latest utilities and drivers at www.msi.com
Installing Windows® 10
1. Power on the computer. 2. Insert the Windows® 10 installation disc/USB into your computer. 3. Press the Restart button on the computer case. 4. Press F11 key during the computer POST (Power-On Self Test) to get into Boot
Menu. 5. Select the Windows® 10 installation disc/USB from the Boot Menu. 6. Press any key when screen shows Press any key to boot from CD or DVD...
message. 7. Follow the instructions on the screen to install Windows® 10.
Installing Drivers
1. Start up your computer in Windows® 10. 2. Insert MSI® USB Drive into the USB port. 3. Click the Select to choose what happens with this disc pop-up notification, then
select Run DVDSetup.exe to open the installer. If you turn off the AutoPlay feature from the Windows Control Panel, you can still manually execute the DVDSetup.exe from the root path of the MSI USB Drive. 4. The installer will find and list all necessary drivers in the Drivers/Software tab. 5. Click the Install button in the lower-right corner of the window. 6. The drivers installation will then be in progress, after it has finished it will prompt you to restart. 7. Click OK button to finish. 8. Restart your computer.
MSI Center
MSI Center is an application that helps you easily optimize game settings and smoothly use content creation softwares. It also allows you to control and synchronize LED light effects on PCs and other MSI products. With MSI Center, you can customize ideal modes, monitor system performance, and adjust fan speed. MSI Center User Guide
If you would like to know more information about MSI Center, please refer to http://download.msi.com/manual/mb/MSICENTER.pdf or scan the QR code to access.
Important
Functions may vary depending on the product you have.
48 Installing OS, Drivers & MSI Center

UEFI BIOS
MSI UEFI BIOS is compatible with UEFI (Unified Extensible Firmware Interface) architecture. UEFI has many new functions and advantages that traditional BIOS cannot achieve, and it will completely replace BIOS in the future. The MSI UEFI BIOS uses UEFI as the default boot mode to take full advantage of the new chipset's capabilities.
Important
The term BIOS in this user guide refers to UEFI BIOS unless otherwise noted. UEFI advantages Fast booting - UEFI can directly boot the operating system and save the BIOS selftest process. And also eliminates the time to switch to CSM mode during POST. Supports for hard drive partitions larger than 2 TB. Supports more than 4 primary partitions with a GUID Partition Table (GPT). Supports unlimited number of partitions. Supports full capabilities of new devices - new devices may not provide backward compatibility. Supports secure startup - UEFI can check the validity of the operating system to ensure that no malware tampers with the startup process. Incompatible UEFI cases 32-bit Windows operating system - this motherboard supports only Windows 10 64-bit operating system. Older graphics card - the system will detect your graphics card. When display a warning message There is no GOP (Graphics Output protocol) support detected in this graphics card.
Important
We recommend that you to replace with a GOP/UEFI compatible graphics card or using integrated graphics from CPU for having normal function. How to check the BIOS mode? 1. Power on your computer. 2. Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter
Boot Menu message appears on the screen during the boot process. 3. After entering the BIOS, you can check the BIOS Mode at the top of the screen.
BIOS Mode: UEFI
UEFI BIOS 49

BIOS Setup
The default settings offer the optimal performance for system stability in normal conditions. You should always keep the default settings to avoid possible system damage or failure booting unless you are familiar with BIOS.
Important
BIOS items are continuously update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be for reference only. You could also refer to the HELP information panel for BIOS item description. The pictures in this guide are for reference only . The BIOS screens, options and settings will vary depending on your system.
Entering BIOS Setup
Press Delete key, when the Press DEL key to enter Setup Menu, F11 to enter Boot Menu message appears on the screen during the boot process.
Function key F1: General Help list F2: Add/ Remove a favorite item F3: Enter Favorites menu F4: Enter CPU Specifications menu F5: Enter Memory-Z menu F6: Load optimized defaults F7: Switch between Advanced mode and EZ mode F8: Load Overclocking Profile F9: Save Overclocking Profile F10: Save Change and Reset* F12: Take a screenshot and save it to USB flash drive (FAT/ FAT32 format only). Ctrl+F: Enter Search page * When you press F10, a confirmation window appears and it provides the modification information. Select between Yes or No to confirm your choice.
BIOS User Guide
If you'd like to know more instructions on setting up the BIOS, please refer to http://download.msi.com/manual/mb/AMDX570BIOS.pdf or scan the QR code to access.

50 BIOS Setup

http://download.msi.com/manual/mb/AMDX570BIOS.pdf

Resetting BIOS
You might need to restore the default BIOS setting to solve certain problems. There are several ways to reset BIOS: Go to BIOS and press F6 to load optimized defaults. Short the Clear CMOS jumper on the motherboard. Press the Clear CMOS button on the rear I/O panel.
Important
Be sure the computer is off before clearing CMOS data. Please refer to the Clear CMOS section for resetting BIOS.
Updating BIOS
Updating BIOS with M-FLASH Before updating: Please download the latest BIOS file that matches your motherboard model from MSI website. And then save the BIOS file into the USB flash drive. Updating BIOS: 1. Switch to the target BIOS ROM by Multi-BIOS switch. If your motherboard does not
has this switch , please skip this step. 2. Insert the USB flash drive that contains the update file into the USB port. 3. Please refer the following methods to enter flash mode.
Reboot and press Ctrl + F5 key during POST and click on Yes to reboot the system.
Press <Ctrl+F5> to activate M-Flash for BIOS update. Reboot and press Del key during POST to enter BIOS. Click the M-FLASH button and click on Yes to reboot the system.
4. Select a BIOS file to perform the BIOS update process. 5. When prompted click on Yes to start recovering BIOS. 6. After the flashing process is 100% completed, the system will reboot
automatically.
BIOS Setup 51

Updating the BIOS with MSI Center Before updating: Make sure the LAN driver is already installed and the internet connection is set properly. Please close all other application software before updating the BIOS. To update BIOS: 1. Install and launch MSI Center and go to Support page. 2. Select Live Update and click on Advance button. 3. Select the BIOS file and click on Install button. 4. The installation reminder will appear, then click the Install button on it. 5. The system will automatically restart to update BIOS. 6. After the flashing process is 100% completed, the system will restart
automatically. Updating BIOS with Flash BIOS Button 1. Please download the latest BIOS file that matches your motherboard model from
the MSI® website. 2. Rename the BIOS file to MSI.ROM, and save it to the root of the USB 2.0 storage
device. 3. Connect the power supply to CPU_PWR1 and ATX_PWR1. (No need to install CPU
and memory.) 4. Plug the USB 2.0 storage device that contains the MSI.ROM file into the Flash
BIOS Port on the rear I/O panel. 5. Press the Flash BIOS Button to flash BIOS, and the LED starts flashing. 6. The LED will be turned off when the process is completed.
52 BIOS Setup

RAID Configuration
The introduction of RAID levels and types are as below: RAID 0 breaks the data into blocks which are written to separate hard drives.
Spreading the hard drive I/O load across independent channels greatly improves I/O performance. RAID 1 provides data redundancy by mirroring data between the hard drives and provides enhanced read performance. RAID 10 uses four hard drives to create a combination of RAID 0 and 1 by forming a RAID 0 array from two RAID 1 arrays.

RAID level comparison Minimum # drives

RAID 0 2

RAID 1 2

RAID 10 4

Data protection

None

Excellent

Read performance

Excellent

Write performance

Excellent

Good

Capacity utilization

100%

50%

Important
All the information/ volumes/ pictures listed in your system might differ from the illustrations in this appendix.
AMD RAID User Guide If you'd like to know more instructions on how to set up AMD RAID, please refer to http://download.msi.com/manual/mb/AMDRAID.pdf or scan the QR code to access.

RAID Configuration 53

Troubleshooting

Before sending the motherboard for RMA repair, try to go over troubleshooting guide first to see if your got similar symptoms as mentioned below.
The power is not on. Connect the AC power cord to an electrical outlet securely. Check if all ATX power connectors like ATX_PWR1, CPU_PWR1 are connected from the power supply to the motherboard? Some power supply units have a power button on the rear side, make sure the button is turned on. Check if the power switch cable is connected to JFP1 pin header properly. Verify the Clear CMOS jumper JBAT1 is set to Keep DATA. Test with another known working power supply of equal or greater wattage.
The power is on, but no signal to monitor Connect the monitor power cord to a electrical outlet securely. Make sure the monitor is turned on. Select different inputs on the monitor. If 3 long beeps are heard, remove all memory modules and try to install only one memory module in the DIMMA2 slot first and then restart the computer. If 1 long 2 short beeps are heard, remove and reinstall the graphics card and then restart the computer. Test with another known working graphics card.

Lost BIOS password Clear the CMOS, but that will cause you to lose all customized settings in the BIOS.
There is no audio Adjust the volume. Connect the speakers/headphones to audio ports on the motherboard rear IO panel. Remove secondary speakers/ headphones, HDMI cables, USB audio devices. Test with another known working speaker or headphone.
There is no network Make sure the network chipset driver has been installed. Verify if the network cable is properly connected and make sure the LAN port LEDs are properly illuminated. Verify your TCP/IP settings. Restart or reset your router. Test with another known working LAN cable.
The USB device is not working Make sure your USB drive driver has been installed. Verify if USB device is listed in Windows® Device Manager. Connect the USB device to other USB port on the motherboard rear IO panel.

The computer does not boot after updating the BIOS Clear the CMOS. Use the secondary BIOS to bootup the system (Only for motherboard with Dual BIOS)

54 Troubleshooting

Regulatory Notices

FCC Compliance Statement
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and receiver.
· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Tested to comply with FCC standards FOR HOME OR OFFICE USE

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CE Conformity
Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable:
RED 2014/53/EU; Low Voltage Directive 2014/35/EU; EMC Directive 2014/30/EU; RoHS Directive 2011/65/EU.
Compliance with these directives is assessed using applicable European Harmonized Standards.
The point of contact for regulatory matters is MSI, MSI-NL Eindhoven 5706 5692 ER Son.

· MAG X570S TOMAHAWK MAX WIFI

: () : : 10-7D54 : 2021 R-R-MSI-10-7D54 : MSI/
· MAG X570S TORPEDO MAX

R-R-MSI-20-7D54

: ()
: : 20-7D54
: 2021
: MSI/

VCCI-B
C-Tick Compliance

Battery Information

European Union: Batteries, battery packs, and accumulators should not be disposed of as unsorted household waste. Please use the public collection system to return, recycle, or treat them in compliance with the local regulations.

Taiwan:

For better environmental protection, waste batteries should be collected separately for recycling or special disposal.

California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California.
For further information please visit: http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

CAUTION: There is a risk of explosion, if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by the manufacturer.
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at:
https://storage-asset.msi.com/html/popup/csr/ evmtprtt_pcm.html
Environmental Policy
· The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.
· Users should contact the local authorized point of collection for recycling and disposing of their end-of-life products.
· Visit the MSI website and locate a nearby distributor for further recycling information.
· Users may also reach us at gpcontdev@msi.com for information regarding proper Disposal, Take-back, Recycling, and Disassembly of MSI products.
WEEE (Waste Electrical and

Regulatory Notices i

Electronic Equipment) Statement
ENGLISH To protect the global environment and as an environmentalist, MSI must remind you that...
Under the European Union ("EU") Directive on Waste Electrical and Electronic Equipment, Directive 2002/96/EC, which takes effect on August 13, 2005, products of "electrical and electronic equipment" cannot be discarded as municipal wastes anymore, and manufacturers of covered electronic equipment will be obligated to take back such products at the end of their useful life. MSI will comply with the product take back requirements at the end of life of MSI-branded products that are sold into the EU. You can return these products to local collection points.
DEUTSCH Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro- und ElektronikAltgeräte nicht mehr als kommunale Abfälle entsorgt werden. MSI hat europaweit verschiedene Sammelund Recyclingunternehmen beauftragt, die in die Europäische Union in Verkehr gebrachten Produkte, am Ende seines Lebenszyklus zurückzunehmen. Bitte entsorgen Sie dieses Produkt zum gegebenen Zeitpunkt ausschliesslich an einer lokalen Altgerätesammelstelle in Ihrer Nähe.
FRANÇAIS En tant qu'écologiste et afin de protéger l'environnement, MSI tient à rappeler ceci... Au sujet de la directive européenne (EU) relative aux déchets des équipement électriques et électroniques, directive 2002/96/EC, prenant effet le 13 août 2005, que les produits électriques et électroniques ne peuvent être déposés dans les décharges ou tout simplement mis à la poubelle. Les fabricants de ces équipements seront obligés de récupérer certains produits en fin de vie. MSI prendra en compte cette exigence relative au retour des produits en fin de vie au sein de la communauté européenne. Par conséquent vous pouvez retourner localement ces matériels dans les points de collecte.

MSI
,
, ....

()

(
WEEE 2002/96/EC), 13
2005 , ,
,
,

. MSI
, MSI
EC,
.
.
ESPAÑOL
MSI como empresa comprometida con la protección

del medio ambiente, recomienda:
Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como "eléctricos y equipos electrónicos" no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida. MSI estará comprometido con los términos de recogida de sus productos vendidos en la Unión Europea al final de su periodo de vida. Usted debe depositar estos productos en el punto limpio establecido por el ayuntamiento de su localidad o entregar a una empresa autorizada para la recogida de estos residuos.
NEDERLANDS Om het milieu te beschermen, wil MSI u eraan herinneren dat.... De richtlijn van de Europese Unie (EU) met betrekking tot Vervuiling van Electrische en Electronische producten (2002/96/EC), die op 13 Augustus 2005 in zal gaan kunnen niet meer beschouwd worden als vervuiling. Fabrikanten van dit soort producten worden verplicht om producten retour te nemen aan het eind van hun levenscyclus. MSI zal overeenkomstig de richtlijn handelen voor de producten die de merknaam MSI dragen en verkocht zijn in de EU. Deze goederen kunnen geretourneerd worden op lokale inzamelingspunten.
SRPSKI
Da bi zastitili prirodnu sredinu, i kao preduzee koje
vodi racuna o okolini i prirodnoj sredini, MSI mora da vas podesti da...
Po Direktivi Evropske unije ("EU") o odbacenoj
ekektronskoj i elektricnoj opremi, Direktiva 2002/96/ EC, koja stupa na snagu od 13. Avgusta 2005, proizvodi
koji spadaju pod "elektronsku i elektricnu opremu" ne
mogu vise biti odbaceni kao obican otpad i proizvoaci
ove opreme bie prinueni da uzmu natrag ove
proizvode na kraju njihovog uobicajenog veka trajanja.
MSI e postovati zahtev o preuzimanju ovakvih proizvoda kojima je istekao vek trajanja, koji imaju MSI
oznaku i koji su prodati u EU. Ove proizvode mozete vratiti na lokalnim mestima za prikupljanje.
POLSKI
Aby chroni nasze rodowisko naturalne oraz jako
firma dbajca o ekologi, MSI przypomina, e...
Zgodnie z Dyrektyw Unii Europejskiej ("UE") dotyczc odpadów produktów elektrycznych i elektronicznych
(Dyrektywa 2002/96/EC), która wchodzi w ycie 13
sierpnia 2005, tzw. "produkty oraz wyposaenie
elektryczne i elektroniczne " nie mog by traktowane
jako mieci komunalne, tak wic producenci tych
produktów bd zobowizani do odbierania ich w
momencie gdy produkt jest wycofywany z uycia.
MSI wypelni wymagania UE, przyjmujc produkty (sprzedawane na terenie Unii Europejskiej) wycofywane
z uycia. Produkty MSI bdzie mona zwraca w wyznaczonych punktach zbiorczych.
TÜRKÇE
Çevreci özelliiyle bilinen MSI dünyada çevreyi
korumak için hatirlatir:
Avrupa Birlii (AB) Kararnamesi Elektrik ve Elektronik
Malzeme Atii, 2002/96/EC Kararnamesi altinda 13
Austos 2005 tarihinden itibaren geçerli olmak üzere,
elektrikli ve elektronik malzemeler dier atiklar
gibi çöpe atilamayacak ve bu elektonik cihazlarin

ii Regulatory Notices

üreticileri, cihazlarin kullanim süreleri bittikten sonra ürünleri geri toplamakla yükümlü olacaktir. Avrupa Birlii'ne satilan MSI markali ürünlerin kullanim süreleri bittiinde MSI ürünlerin geri alinmasi istei ile ibirlii içerisinde olacaktir. Ürünlerinizi yerel toplama noktalarina birakabilirsiniz.
CESKY Zálezí nám na ochran zivotního prostedí - spolecnost MSI upozoruje... Podle smrnice Evropské unie ("EU") o likvidaci elektrických a elektronických výrobk 2002/96/ EC platné od 13. srpna 2005 je zakázáno likvidovat
"elektrické a elektronické výrobky" v bzném komunálním odpadu a výrobci elektronických
výrobk, na které se tato smrnice vztahuje, budou povinni odebírat takové výrobky zpt po skoncení jejich zivotnosti. Spolecnost MSI splní pozadavky na odebírání výrobk znacky MSI, prodávaných v zemích EU, po skoncení jejich zivotnosti. Tyto výrobky mzete odevzdat v místních sbrnách.
MAGYAR Annak érdekében, hogy környezetünket megvédjük,
illetve környezetvédként fellépve az MSI emlékezteti Önt, hogy ... Az Európai Unió (,,EU") 2005. augusztus 13-án hatályba
lép, az elektromos és elektronikus berendezések hulladékairól szóló 2002/96/EK irányelve szerint az elektromos és elektronikus berendezések
többé nem kezelhetek lakossági hulladékként, és az ilyen elektronikus berendezések gyártói kötelessé válnak az ilyen termékek visszavételére azok hasznos élettartama végén. Az MSI betartja a termékvisszavétellel kapcsolatos követelményeket az MSI márkanév alatt az EU-n belül értékesített termékek esetében, azok élettartamának végén. Az
ilyen termékeket a legközelebbi gyjthelyre viheti.
ITALIANO Per proteggere l'ambiente, MSI, da sempre amica della natura, ti ricorda che.... In base alla Direttiva dell'Unione Europea (EU) sullo Smaltimento dei Materiali Elettrici ed Elettronici, Direttiva 2002/96/EC in vigore dal 13 Agosto 2005, prodotti appartenenti alla categoria dei Materiali Elettrici ed Elettronici non possono più essere eliminati come rifiuti municipali: i produttori di detti materiali saranno obbligati a ritirare ogni prodotto alla fine del suo ciclo di vita. MSI si adeguerà a tale Direttiva ritirando tutti i prodotti marchiati MSI che sono stati venduti all'interno dell'Unione Europea alla fine del loro ciclo di vita. È possibile portare i prodotti nel più vicino punto di raccolta
JIS C 0950
JIS C 0950200671
https://storage-asset.msi.com/html/popup/csr/ cemm_jp.html
India RoHS
This product complies with the "India E-waste (Management and Handling) Rule 2011" and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Türkiye EEE yönetmelii

Türkiye Cumhuriyeti: EEE Yönetmeliine Uygundur

, 3 2008 1057.

Vit Nam RoHS
K t ngày 01/12/2012, tt c các sn phm do công ty MSI sn xut tuân th Thông t s 30/2011/TT-BCT quy nh tm thi v gii hn hàm lng cho phép ca mt s hóa cht c hi có trong các sn phm in, in t"

Wireless Radio Use

This device is restricted to indoor use when operating in the 2.4GHz, 5GHz frequency band.

Cet appareil doit être utilisé à l'intérieur.

2.4GHz, 5GHz

NCC

2.4GHz, 5GHz

Products with radio functionality (EMF)

This product incorporates a radio transmitting and receiving device. For computers in normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with EU requirements. Products designed to be operated at closer proximities, such as tablet computers, comply with applicable EU requirements in typical operating positions. Products can be operated without maintaining a separation distance unless otherwise indicated in instructions specific to the product.

Restrictions for products with radio functionality

CAUTION: IEEE 802.11x wireless LAN with 5.155.35 GHz frequency band is restricted for indoor use only in all European Union member states, EFTA (Iceland, Norway, Liechtenstein), and most other European countries (e.g., Switzerland, Turkey,
Republic of Serbia). Using this WLAN application outdoors might lead to interference issues with existing radio services.

Radio frequency bands and maximum power levels

Features

:802.11 a/b/g/n/ac/ax, BT

Frequency Range :2.4GHz, 5GHz, 6GHz

Modulation

:FHSS, DSSS, OFDM

Power Output

:10, 20, 23

Channel Band Width :1, 5, 20 ,40 , 80, 160MHz

Regulatory Notices iii

MS-7D54

(Pb)

(Hg)

(Cd)

(Cr(VI))

(PBB)

(PBDE)

SJ/T 11364 : GB/T 26572 : GB/T 26572 RoHS * : **

()MS-7D54

(Pb)

(Hg)

(Cd)

(Cr+6)

(PBB)

1. "0.1 wt %" "0.01 wt %" 2. "" 3. ""

(PBDE)

Copyright
Micro-Star Int'l Co.,Ltd.
Copyright © 2021 All rights reserved.
The MSI logo used is a registered trademark of Micro-Star Int'l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice.
Revision History
Version 1.0, 2021/06, First release.

Technical Support
If a problem arises with your system and no solution can be obtained from the user guide, please contact your place of purchase or local distributor. Alternatively, please try the following help resources for further guidance.
· Visit the MSI website for technical guide, BIOS updates, driver updates, and other information: http://www.msi.com
· Register your product at: http://register.msi.com

iv Regulatory Notices

Adobe PDF Library 10.0.1 Adobe InDesign CS6 (Windows)