SE-60 True Wireless Earbuds User Manual

Product Diagram Description

The earbuds and charging case are depicted. Key components include the Multitouch area on the earbuds for controls, an LED indicator light to show status, a Microphone hole for calls, and charging contacts for connecting to the charging case.

Powering On/Off

Powering On

Take the earbuds out of the charging case for automatic power-on, or long-press the multifunction button on each earbud for 3 seconds.

Powering Off

Place the earbuds into the charging case for automatic power-off, or long-press the multifunction button on each earbud for 5 seconds.

Connecting to Devices

Automatic Reconnection

After successful pairing, the earbuds will automatically attempt to reconnect to the last connected device when powered on.

Pairing Method

Remove earbuds from the charging case or long-press the multifunction buttons on both earbuds for 3 seconds until the indicator lights flash alternately. This enters the pairing mode. The earbuds will automatically pair with each other. The main earbud's indicator will flash alternately, and the secondary earbud's indicator will turn off. A pairing success tone will play.

Enable Bluetooth on your phone or device. For Android, search for wireless devices. For iOS, it will search automatically. Select the headset model from the list and pair. A connection success tone will play, and the earbud indicators will turn off, entering standby mode. The right earbud will handle the right audio channel, and the left earbud will handle the left audio channel.

Each earbud can also be paired individually with a device by following the same pairing steps.

Music and Call Controls

Play/Pause

In standby mode, single-click the multifunction button on either earbud to play music. Single-click again to pause.

Switch Songs

While music is playing, double-click the multifunction button on the right earbud for 2 seconds to switch to the next track. Double-click the multifunction button on the left earbud for 2 seconds to switch to the previous track.

Answer/End Calls

Single-click the multifunction button on either earbud to answer an incoming call. Single-click again during a call to hang up.

Reject Calls

Long-press the multifunction button on either earbud for 2 seconds to reject an incoming call.

Redial Last Number

While on standby or playing music, triple-click the multifunction button on the left earbud to redial the last number from your call history.

Activate Voice Assistant

Triple-click the multifunction button on the right earbud to activate Siri (Apple) or Google Assistant for voice control.

Special Modes

Transparency, Noise Reduction, and Normal Mode

Long-press the multifunction button on either earbud for 1.5 seconds to activate Transparency Mode. A second long-press for 1.5 seconds activates Noise Reduction Mode. A third long-press for 1.5 seconds returns to Normal Mode.

Low Battery Alert

When the battery level is low, the earbuds will play a warning tone until they power off.

Charging the Charging Case

Connect the Type-C charging cable to the charging case and a 5V/1A standard charger.

Charging the Earbuds

Place the earbuds into the charging case. They will automatically begin charging. The earbud indicator light will be red while charging and turn off when fully charged.