User Guide for COMMSCOPE models including: TC-96365-IP Prodigy Connector, TC-96365-IP, Prodigy Connector, Connector
HCA-A01G | CommScope
TC-96365-IP · Rev A · May 2023 Quick Start Installing Female Converter on ProdigyTM Connector Remove dust cap as follows: (a) Rotate 1 locking nut 45 degrees in direction shown, and (b) pull off dust cap from Prodigy connector. a Work on a clean NOTE: surface, taking care to avoid dust contamination of mating surfaces. Install the female converter as follows: (a) remove the red ferrule dust cap from the Prodigy 2 connector, (b) locate Prodigy female converter, (c) hold onto converter body to keep it from turning, (d) Roughly align the alignment key on Prodigy ALIGNMENT DETAILS ALIGNMENT GUIDE connector core with FERRULE DUST CAP alignment guide in converter body; (e) insert the connector ALIGNMENT KEY 3d 3e a core all the way in. 3b PRODIGY FEMALE CONVERTER BODY . . 3b DUST CAP PRODIGY CONNECTOR CORE LOCKING NUT ALIGNMENT GUIDE CONVERTER BODY 3c Electronic Only Document (EOD) FERRULE DUST CAP ALIGNMENT KEY NOTE: Colors in llustrations are muted. CommScope (logo), CommScope, and Prodigy are trademarks. NOTE: Hold converter body stationary while inserting connector core into rear opening of converter, as directed in step 2. (f) turn the locking nut 45° in direction shown until it locks into position. . f FEMALE CONVERTER FULLY ASSRMBLED LOCKING NUT © 2023, CommScope, Inc. All Rights Reserved. 28088-A Page 1 of 2 TC-96365-IP · Rev A · May 2023 Removing Female Converter from ProdigyTM Connector Remove coupling nut as follows: 1 (a) Insert converter dust cap flat head feature in converter coupling nut Remove the female converter from the Prodigy connector as follows: 2 (a) Rotate locking nut 45° in direction shown to unlock the Prodigy from break line indicator; the Female converter; b) twist converter dust cap ± 90° in direction shown to crack the coupling nut; (c) if required, repeat the action at the opposite side of the coupling nut; (b) pull off converter from Prodigy connector core. (d) pull off coupling nut parts from Prodigy female converter. FLATHEAD FEATURE LANYARD COUPLING NUT CONVERTER DUST CAP 3a FLATHEAD FEATURE LOCKING NUT BREAK LINE INDICATOR NOTE: Colors in llustrations are muted. 3b LOCKING NUT 3a 45 o 3c 3d © 2023, CommScope, Inc. All Rights Reserved. 3b 28090-A Page 2 of 2Adobe PDF library 17.00