User Guide for Adaptive models including: ADVM-FD1, Ford with Sync3 8-Inch Touchscreen
Aerpro | First Choice
WWW.ADAPTIV-MULTIMEDIA.COM 3 CONNECTIONDIAGRAM DIPSWITCHSETTINGS DIP1 IfthevehiclehasOEM reversecamera (ON:YESOFF:NO) DIP3 Ifthevehiclehasafter-marketreversecamera
WWW.ADAPTIV-MULTIMEDIA.COM 1 ABOUT Adaptiv Mini Adaptiv Mini allows HDMI & Camera input to the OEM screen. This plug and play Mini interface adds HDMI to connect your Apple or Android device, allowing you to mirror your smartphone display on the vehicle's original screen. Inputs for front and rear aftermarket cameras also come as standard with the Mini. Application For Ford vehicles with Sync3 systems and 8" display (dash embedded-style). Note: Not for vehicles with newer Sync3.2 systems or tablet-style displays. Please see Part Number ADVM-FD2. Kit Includes Adaptiv Interface Vehicle Harness Prior to installation Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. Connects2 cannot be held responsible for the installation of this product. Technical Support Connects2 want to provide a fast and suitable resolution should you encounter any technical issues. With this in mind, when contacting Connects2, try to provide as much Information as possible. This will speed up the process and help us to help you. Please use our dedicated online technical support centre: support.connects2.com 2 ADVM-FD1 FORD SYNC3 CONNECTION DIAGRAM DIP SWITCH SETTINGS DIP 1 If the vehicle has OEM reverse camera ( ON: YES OFF: NO ) Note: LVDS connection must be made directly the vehicle's SYNC module (location will vary depending on vehicle model) Extension cable (sold separately) may be required for some models. Part number: LVDSEXT DIP 3 If the vehicle has aftermarket reverse camera ( ON: YES OFF: NO ) DIP 2 If the vehicle has aftermarket front camera ( ON: YES OFF:NO ) DIP 4 OFF DIP 5 OFF WWW.ADAPTIV-MULTIMEDIA.COM 3 USER GUIDE Button Configuration Button 1 - Left arrow (steering wheel) or SOUND button on OEM head unit Button 2 - Right arrow (steering wheel) HDMI Access Connect the USB dongle supplied to the Sync USB input**. Select USB source from the OEM menu sources. The dongle will appear as `USB AUX'. Hold BUTTON 1 for 2 seconds to switch between OEM screen and Adaptiv Mini HDMI screen Video In Motion Warning - 10 MPH Hold BUTTON 2 ( or press top right corner of touch screen ) to disable the video in motion warning message Rear and Front Camera Access From either HDMI mode or OEM mode 1. Select reverse gear for reverse camera 2. Deselect reverse gear - will go to after market front camera ( if DIP 2 ON ) Press top right corner of screen to cancel front camera or drive over 10 MPH Front Camera Access Hold BUTTON 2 for 2 seconds to enter the front camera screen ( if DIP 2 is ON ) or double press SOUND button on OEM head unit. View Version Number Hold BUTTON 1 Button for 8 seconds to enter firmware information screen **Note that there may be a slight delay in HDMI audio lip sync , due to the USB audio buffer time of the OEM system. This is dependant on manufacturer original equipment specification. 4 ADVM-FD1 FORD SYNC3PDFlib PDI 9.2.0p5-i (macOS) Serif Affinity Publisher 1.9.3