User Manual for LINOVISION models including: 4GPTZ Portable Mobile Emergency Suitcase, 4GPTZ, Portable Mobile Emergency Suitcase
9.1 Use "Device configuration assistant". 9.2 Use "Network video surveillance system/built-i. PORTABLE MOBILE EMERGENCY SUITCASE. User Manual. Thanks to purchase the products, if...
7 Others Protection IP67 Dimension 410*340*205mm Weight 9.2KG Workinghumidity Temperature-20℃~60℃,humidity5%~95% 4. Configurationandusage ...
File Info : application/pdf, 16 Pages, 1.40MB
DocumentDocumentPORTABLE MOBILE EMERGENCY SUITCASE User Manual Thanks to purchase the products, if you have any question or requirement, please feel free to contact us. As the reference of usageinstruction, the description of some details may be not so accurate in this manual.The contents of this document will be updated irregularly for product version upgrading or other reasons, and the update will be added in the new version of the manual, we will not notify separately. Please read the manual carefully before installation and use. Precautions Please be sure to obey the follows when using this product: Please read the manual carefully before using the device, and obey the instructions strictly when operating. Be sure to turn off all the related power when installing the device accessories. Don't use the device in excessive humidity or high temperature environment, avoid using the device near the strong interference source and the shielding. Avoid dropping the device on the ground or being attacked seriously by other object. The product is a precision electronic device, please do not privately disassemble or install without permission. Suggest to protect with factory packaging when shipping products. The device batteries, power adapter and accessories are specific models, be sure to contact the manufacturer or local dealersif the batteries need to be changed, in case of the danger caused by improper change or removal. Please contact our technical personnel if you have any question or requirement during the using process. 1 Contents 1. Product introduction.......................................................................................................................... 3 2. Appearance and interface description............................................................................................... 3 3. Parameter specification..................................................................................................................... 6 4. Configuration and usage....................................................................................................................7 4.1 login built-in webpage.................................................................................................................7 4.2 Platform address setting.............................................................................................................. 7 4.3 Access ways.................................................................................................................................8 4.3.1 Cable access..................................................................................................................... 8 4.3.2 WiFi access...................................................................................................................... 8 4.3.3 4G/3G access....................................................................................................................9 5. Scheduling screen operation instructions........................................................................................ 10 5.1 Login status............................................................................................................................... 10 5.2 Application settings................................................................................................................... 11 5.3 Video command......................................................................................................................... 11 5.4 Map command........................................................................................................................... 12 5.5 Query playback..........................................................................................................................12 5.6 System settings.......................................................................................................................... 13 6. Command and schedule platform....................................................................................................13 7. Real-time preview........................................................................................................................... 13 8. Query playback................................................................................................................................14 9. Restore factory settings................................................................................................................... 14 9.1 Use "Device configuration assistant"........................................................................................14 9.2 Use "Network video surveillance system/built-in webpage"....................................................15 2 1. Product introduction 4G HD portable emergency command device is a full-featured integrative product with functions of high-definition, smooth, and stable video effect, real-time location, emergency, PTZ operation, two-waytalkback, etc. It is a complete set of emergency command devices that specially designed for unexpected emergencies, and provides technical support for realizing "smooth communication, real-time scene, complete data, and command in place". The product is widely applied in the occasions of emergency command, public security, criminal investigation, traffic police / patrolman, fire fighting, civil air defense, border defense, urban management, electric power, road administration, etc. 2. Appearance and interface description The product is a 4G multi-functional portable suitcase terminal, the device appearance and corresponding interfaces are as shown below: Appearance 3 Upper panel Lower panel The functions of the relevant interfaces on the device are shown in the table below 4 No. Upper panel Lower panel Interfaces Functions HDMI Synchronously output the screen image Standard USB Square USB 3.5mm headphone jack YC9 aviation plug Connect with USB, keyboard, mouse and otherperipherals Develop and debug the installation system, also can be connect with peripherals Android system sound output Connect with talkback handheld microphone HDMI HDMI video input port Standard USB Extended LinuxUSB peripheralspower supply is available RJ45 network port Power Network Video recording Alarm PTZ TF card slot SIM card slot Electronic disk System debugging or cable video transmission Press and hold for 3s to boot, the light is bright; Press and hold for 3s to shut, the light is twinkling. Short press to switch network connection methods(using cable method when light is bright while using 4/3G method when light is off) Short press to start/stop video recording (recording when light is bright while stopping recording when light is off) Press and hold for 3s, the light is bright, device issued a warning to the platform Four-dimensional rocker, control the camera to turn to the up, down, left and right. Rotation, control the camera to zoom out or zoom in. short press the middle button to capture the image. Clamshell card slot, push to the left to open the cover, dual cards up to 128G Clamshell card slot, push to the left to open the cover, 4 cards can be extended mSATA electronic disk installation position Indicator panel 4/3G dial-up status indication, "1" indicates module number Figure 1: dial-up success Figure 2: idle status Figure 3: card is not detected Using the cable connection way, can use the cable to connect the BGAN router to access the command center WiFi status indiction (figure 1: not enabled. Figure 2: connection success) TF card status indication Location indication (bright: locating success. Twinkling: searching location...) Battery indication 5 Side interfaces Storage status indication Indicators on the right side Green twinkling: recording Red bright: stop recording Red twinkling: low battery warning Charging interface on the right side HD PTZ camera video input interface on the right side GPS antenna interface on the right side 3. Parameter specification Items Video Audio Display Network Storage Location Power Details Specifications Input Interface Compression standard Resolution Frame rate Bit stream Video adjustment Snapshot Compression standard Input Output Screen size Resolution Visual angle 3G/4G WiFi Wired Medium mSATA Format 1-channel analog high definition, compatible with CVBS, AHD1.0,AHD2.0, automatic recognition 1-channel HDMI, up to 1080P@30fps Aviation interface on the right side H.265 H.264 CVBS960HD14CIFCIF AHD1.0720PVGA AHD2.01080P720PVGA HDMI1080P720PVGA 1~25f adjustable Support dual-stream, 64kbps~6Mbps can be set Brightness, contrast, saturation, adjustable Support the snapshot of different input source and resolution, format G711A,G711U, ADPCM 1-channel, built-in microphone or handheld microphone input 1-channel, built-in loudspeaker or handheld microphone output 13.3 inch 1920*1080 88/88/88/88 WCDMA,EVDO,TD-SCDMA,TDD-LTE,FDD-LTE 802.11b/g/n2.4G RJ45,10/100M self-adaption Ethernet port TF, up to 128G, dual cards Built-in a mSATA installation position AVI, 15~60 minutes can be set, start or stopcontrolled by a button System Antenna Input Interface Battery Support GPS and Beidou dual-module locating SMA interface, external 12.6V@4A DC constant voltage input DC5.5*2.1interface on the right side Built-in 3 lithium batteries, 30Ah 6 Others Protection Dimension Weight Working humidity IP67 410*340*205mm 9.2KG Temperature -20~60, humidity 5%~95% 4. Configuration and usage It is necessary to set up some parameters before install the device, such as the access platform address, etc. The specific configuration process is as shown below, please contact the customer service personnel if you have any question. 4.1 login built-in webpage Please login the built-in webpage according to the following operations, please contact the customer service personnel if you have any question. 4.2 Platform address setting After login the built-in webpage, enter the "device configuration" page. Click "system/platform access", and select "enable platform access", input the platform address in the pop-up window, such as 60.173.195.210:9988, click submit and refresh. When the access status shows "access success", the video can be previewed after logged in the platform via the network video surveillance system. 7 4.3 Access ways Different network connection way can be selected to make the device access the platform according to the requirements. Three ways are supported by the device to connect the network: cable/ WiFi /4G. Fast switching can be realized via the `network" button on the lower panel, and according to the display status on the indicator panel to judge the connection way and connection status. The configuration modification also can be realized via client/built-in webpage, the details are as below: 4.3.1 Cable access Click after login the built-in webpage, find the "network configuration" in the system, input the IP address, subnet mask and gateway in the IP settings. Select "enable DHCP" if use the auto access way, submit. Select "use the cable" in the "preferred network", submit. 4.3.2 WiFi access Click after login the built-in webpage, find the "network configuration" in the system, and select "use WiFi" in the "preferred network", submit. Click WiFi option and select "enable WiFi', input the wireless network account and password, submit and refresh. Observe the module status until the connection is successful. (Note: the hotspot function needs to be shut firstly) 8 4.3.3 4G/3G access Click after login the built-in webpage, find the "network configuration" in the system, and select "use 4G/3G" in the "preferred network", submit. Click 4G/3G option, check the dial-up status in the status parameters, the device has access to the network when it shows "dial-up success". It needs to add APN, access number, and password in the configuration parameters if the used SIM card is the private network card. 9 5. Scheduling screen operation instructions As shown in the figure below, the LCD of the upper panel is the android system touch screen. Main function modules: login status, video command, map command, query playback, application settings, system settings. The follows will introduce the function of each module. Screen function sketch 5.1 Login status Device connection / login server status are shown on the left upper corn of the screen.If it displays "Device connection is successful", it indicates that the connection between the upper panel and the lower panel is smooth. When it shows "login server is successful", it means the device has successfully logged onto the emergency command system. As shown in the figure below, if login server is not successful, please check the network connection, and configure the platform address and user name of the emergency command system in the "application settings". 10 Login process sketch 5.2 Application settings It needs to input the platform address, user name and password in the "application settings" before login the server. Please login again after save. The network port IP of the device can be set in the network settings, as shown in the figure below: 5.3 Video command Enter the page "video command", real-time scene image can be seen. 2-channel HD videos are displayed, one main channel video input source is HDMI, and the other channel video input source comes from the camera in the right side of the suitcase. Full-screen display and snapshot are supported. The online group members are displayed on the right side, click the microphone icon to shout to the group, or talk to any member in the groupand watch his real-time video. 11 5.4 Map command People can master the location information of their own and other portable terminals in the "map command" page and view the video of other terminals, as shown in the figure below: 5.5 Query playback The video files and images saved in the built-in memory card can be queried and processed playback in the "query playback" page, as shown in the figure below: 12 5.6 System settings Each functional parameter can be changed in the Android system after enter the page, the same with other Android system settings, no longer describe details here. 6. Command and schedule platform Login the emergency command and schedule platform after logged into the server tocreate cluster group.Group communication, retrieval image, video conference and other functions can be realized. Please refer to the User Manual of emergency command and schedule client for the details. 7. Real-time preview "network video surveillance system" can be used after device successfully accessed platform. After login, the real-time image of the online devices can be viewed. Select an online device, double click to unfold the camera resource, double click the camera, video will be displayed on the window. Right click the image to pop up the shortcut bar, snapshot, video recording, talkback and other functions can be realized, as shown in the figure below: 13 8. Query playback Login "network video surveillance system", click query playback. : query the videos saved in the platform, : query the videos saved in the device storage medium. Select device and date, click to query, double click the video file in the query results to playback, or right click to download the video, as shown in the figure below: 9. Restore factory settings 9.1 Use "Device configuration assistant" Make sure PC and device in the same LAN, open the tool "Device configuration assistant" to search the device and select it, click icon, find "device maintenance" in the pop-up window, click "restore factory settings" to confirm, as shown in the figure below: 14 9.2 Use "Network video surveillance system/built-in webpage" Login the network video surveillance system, click "device management", double click the device in the device list, select system/device information/restore factory settings. Operations of the built-in webpage are the same, as shown in the figure below: 15WPS 文字