Instruction Manual for Vicotee models including: 11010308 Installing of External Antenna Kit, 11010308, Installing of External Antenna Kit, External Antenna Kit, Antenna Kit

数据手册下载

Vicotee 公司产品采购专区 Vicotee 官网主要业务介绍 Vicotee代理商品牌哪家便宜-百能云芯元器件商城

Installing of External Antenna Kit (PN 11010308)

6 ore fa — External antenna kit for Aurora (PN 11010308) is an an angled IP54 antenna. The kit comes with 5 parts: Antenna cable (1). O-Ring / Rubber Seal (2).

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 2 Pages, 285.96KB

Log in
Home  Manuals  Aurora Platform
Installing of External Antenna Kit (PN 11010308)
External antenna kit for Aurora (PN 11010308) is an an angled IP54 antenna. The kit comes with 5 parts:
Antenna cable (1) O-Ring / Rubber Seal (2) Washer (3) Nut (4) Antenna (5)
Figure 1
Installing The Kit
1. Start with removing the rear lid by removing rubber feet (1) that cover the four screws (2). (Figure 2) 2. Unscrew all four screws (2) using T8 torx driver. (Figure 2) 3. Carefully lift the rear lid and batteries (4) from the device. (Figure 2) 4. Carefully remove the old antenna. (Figure 2) 5. Installing the new antenna kit using middle hole of the Aurora box as shown in Figure 1. 6. Reinsert the batteries, pay attention to the polarity of the batteries.
Downloaded from Arrow.com.

7. Close the rear lid and screw back all four screws. Finally cover the screws with rubber feet.

Figure 2

Caution

When lifting the rear lid, do not twist while lifting. Keep lifting straight up to avoid the lid hitting components inside the box.

Design by Adaptivethemes.com

Downloaded from Arrow.com.



References

• Adaptivethemes.com