ioSafe 1019+ Network Attached Storage Device User Manual

User Manual for ioSafe models including: 1019, Network Attached Storage Device, Attached Storage Device, 1019, Attached Storage

English

Product Manuals - ioSafe

ioSafe 1019

2.3 M.2 NVMe SSD Cache Installation. You may optionally install up to two M.2 NVMe SSDs into the ioSafe 1019 to create an SSD cache.

File Info : application/pdf, 28 Pages, 2.68MB

ioSafe1019 Manual A8-7520-0000 Rev1.4b

ioSafe® 1019+
Network-Attached Storage Device
User Manual

ioSafe 1019+ User Manual

Table of Contents

1 General Information

1.1 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

1.2 Identifying Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

1.3 LED Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

1.4 Warnings and Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

2 Hardware Installation

2.1 Tools and Parts for Drive Installation . . . . . . . . . . . . . . . . . . . . . . .6

2.2 SATA Drive Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2.3 M.2 NVMe SSD Cache Installation . . . . . . . . . . . . . . . . . . . . . . . 11

2.4 Replace Memory Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.5 Connecting the ioSafe 1019+ . . . . . . . . . . . . . . . . . . . . . . . . . 16

3 Install Synology DiskStation Manager

4 Connect and Log in to Synology DiskStation Manager 19

5 Using Synology DiskStation Manager

6 Replace System Fans

7 Product Support

7.1 Activate Data Recovery Service Protection . . . . . . . . . . . . . . . . . . 23

7.2 ioSafe No-Hassle Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

7.3 Data Recovery Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

7.4 Contact Us. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Disaster Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

8 Technical Specifications

ioSafe 1019+ User Manual

1 General Information
1.1 Package Contents Check the package contents to verify that you have received the items below. Please contact ioSafe® if any items are missing or damaged.

24x* 1x

1x**

*Only included with unpopulated units
**Power cable is localized to the region you purchased your product for, whether North America, European Union/United Kingdom, or Australia. European Union and United Kingdom units are packaged with two power cables, one for each region.

ioSafe 1019+ User Manual

1.2 Identifying Parts

Front

System Status Indicator

Drive

USB

Status Type A

Indictators Port

Rear

System Fan

Power Button Kensington® Security Slot

System Fan
Reset Button Power In

eSATA LAN Port Ports

USB Type A Port

ioSafe 1019+ User Manual

1.3 LED Behavior LED Name Color
Green

State
Solid

Status

Amber

Blinking

Drive Activity LEDs #1-5

Green Amber

Power

Blue

Off Solid
Blinking Solid
Off
Solid Blinking
Off

Description
The unit is operating normally.
Indicates one of the following states: · Volume degraded · Volume crashed · Volume not created · DSM not installed
The hard drives are in hibernation.
The corresponding drive is ready and idle.
The corresponding drive is being accessed
Indicates a drive error for the corresponding drive
No internal drive installed in the corresponding drive bay, or the drive is in hibernation.
Indicates that the unit is powered on.
The unit is booting up or shutting down.
The unit is powered off.

1.4 Warnings and Notices Please read the following before using the product.
General Care
· To avoid overheating, the unit should be operated in a well-ventilated area. Do not place the unit on a soft surface, such as carpet, that will obstruct air flow into the vents on the underside of the product.
· The internal components in the ioSafe 1019+ unit are susceptible to static electricity. Proper grounding is strongly recommended to prevent electrical damage to the unit or other connected devices. Avoid all dramatic movement, tapping on the unit, and vibration.
· Avoid placing the unit close to large magnetic devices, high voltage devices, or near a heat source. This includes any place where the product will be subject to direct sunlight.
· Before starting any type of hardware installation, ensure that all power switches have been turned off and all power cords have been disconnected to prevent personal injury and damage to the hardware.

ioSafe 1019+ User Manual

2 Hardware Installation
2.1 Tools and Parts for Drive Installation · A Phillips screwdriver · 3mm hex tool (included) · At least one 3.5-inch or 2.5-inch SATA hard drive or SSD (please visit iosafe.com for a list of
compatible drive models)
Formatting a drive will result in data loss, so be sure to back up your data before beginning this operation.

2.2 SATA Drive Installation
If you purchased an ioSafe 1019+ that was shipped with hard drives pre-installed, skip Section 2.2 and continue on to the next section.
a. Use the included 3mm hex tool to remove the screws on the top and bottom of the front cover. Then remove the front cover.

b. Remove the waterproof drive cover with the 3mm hex tool.

ioSafe 1019+ User Manual

c. Remove the drive trays with the 3mm hex tool.

ioSafe 1019+ User Manual

d. Install a compatible drive into each drive tray using (4x) drive screws and a Phillips screwdriver. Please visit iosafe.com for a list of qualified drive models.
When setting up a RAID set, it is recommended that all installed drives should be the same size in order to make the best use of drive capacity.

e. Insert each loaded drive tray into an empty drive bay, ensuring that each one is pushed in all the way. Then tighten the screws using the 3mm hex tool.

ioSafe 1019+ User Manual

f. Replace the waterproof drive cover and securely tighten it using the 3mm hex tool.
Avoid using tools other than the supplied hex tool to secure the waterproof drive cover as you could under-tighten or break the screw. The hex tool has been designed to flex slightly when the screw is sufficiently tight and the wateproof gasket is properly compressed.

10 ioSafe 1019+ User Manual
g. Install the front cover to finish installation and protect the drives from fire.
h. You may optionally use the round magnet provided to attach and store the hex tool on the back of the unit.

ioSafe 1019+ User Manual 11
2.3 M.2 NVMe SSD Cache Installation You may optionally install up to two M.2 NVMe SSDs into the ioSafe 1019+ to create an SSD cache volume to boost the read/write speed of a volume. You can configure the cache in read-only mode using one SSD or either read-write (RAID 1) or read-only modes (RAID 0) using two SSDs.
The SSD Cache must be configured in Synology DiskStation Manager (DSM). Please refer to the section for SSD Cache in the Synology NAS User's Guide at synology.com or in DSM Help on the DSM desktop.
ioSafe recommends that you configure the SSD-cache as read-only. The HDDs in a RAID 5 mode are faster than the cache at sequential read and write operations. The cache only provides a benefit with random read and write operations.
a. Shut down your ioSafe. Disconnect all cables connected to your ioSafe to prevent possible damage.
b. Turn the ioSafe over so that it is upside down. c. Use a Phillips screwdriver to remove the screw securing the bottom cover and remove it. You will
see four slots, two slots populated with RAM memory and two slots for SSDs.

12 ioSafe 1019+ User Manual
d. Remove the plastic retainer clip from the rear of the SSD slot(s) you intend to use.
e. Align the notch on the gold contacts of the SSD module with the notch on the empty slot and insert the module into the slot to install it.

ioSafe 1019+ User Manual 13

f. Hold the SSD module flat against the slot bay (Fig. 1) and reinsert the plastic retainer clip back into the rear of the slot to secure the SSD module. Press down firmly to secure the clip in place (Fig. 2).

g. Repeat the steps above to install another SSD into the second slot if needed. i. Replace the bottom cover and secure it in place using the screw you removed in Step C .

h. Turn the ioSafe back over and reconnect the cables you removed in Step A (see Section 2.5). You may now turn your ioSafe back on.
i. Follow the instructions for configuring your SSD Cache in the Synology NAS User's Guide at synology.com or in DSM Help on the DSM desktop.

14 ioSafe 1019+ User Manual
2.4 Replace Memory Modules The ioSafe 1019+ comes with two 4GB of 204-pin SO-DIMM DDR3 RAM (8GB total) memory. This memory is not user upgradable. Follow these steps to replace the memory modules in event of a memory failure. a. Shut down your ioSafe. Disconnect all cables connected to your ioSafe to prevent possible
damage. b. Turn the ioSafe over so that it is upside down. c. Use a Phillips screwdriver to remove the screw securing the bottom cover and remove it. You will
see four slots, two slots for SSDs and two slots populated with 204-pin SO-DIMM RAM memory.
d. Pull the levers on both sides of a memory module outward to release the module from the slot.

ioSafe 1019+ User Manual 15

e. Remove the memory module.
f. Align the notch on the gold contacts of the memory module with the notch on the empty slot and insert the memory module into the slot (Fig. 1). Push firmly until you hear a click to secure the memory module in the slot (Fig. 2). If you encounter difficulty when pushing down, push the levers on either side of the slot outward.

g. Repeat the steps above to install another memory module into the second slot if needed. h. Replace the bottom cover and secure it in place using the screw you removed in Step C.

i. Turn the ioSafe back over and reconnect the cables you removed in Step A (see Section 2.5). You may now turn your ioSafe back on.
j. If you haven't already, install Synology DiskStation Manager (DSM) (see Section 3). k. Log into DSM as an administrator (see Section 4). l. Go to Control Panel > Info Center and check Total Physical Memory to verify that the
correct amount of RAM memory is installed.
If your ioSafe 1019+ does not recognize the memory or fails to start up, please make sure that each memory module is correctly seated in its memory slot.

16 ioSafe 1019+ User Manual
2.5 Connecting the ioSafe 1019+
Do not place the ioSafe 1019+ device on a soft surface, such as carpet, that will obstruct air flow into the vents on the underside of the product.
a. Connect the ioSafe 1019+ to your switch/router/hub using the provided Ethernet cable. b. Connect the unit to power using the provided power cord. c. Press and hold the power button to turn on the unit.

If you purchased an ioSafe 1019+ without drives pre-installed, the fans inside the unit will spin at full speed until you install Synology DiskStation Manager (see Section 3) and Synology DiskStation Manager has booted up. This is the default behavior for the cooling fans and is intended.

ioSafe 1019+ User Manual 17
3 Install Synology DiskStation Manager
Synology DiskStation Manager (DSM) is a browser-based operating system which provides tools to access and manage your ioSafe. When installation is complete, you will be able to log into DSM and start enjoying all the features of your ioSafe powered by Synology. Before getting started, please check the following:
Your computer and your ioSafe must be connected to the same local network.
In order to download the latest version of DSM, Internet access must be available during installation.
Any ioSafe 1019+ that was shipped with hard drives pre-installed already has Synology DiskStation Manager installed. If you have drives pre-installed, continue on to Section 4. a. Turn on the ioSafe 1019+ if it is not already powered on. It will beep once when it is ready to set up. b. Type in one of the following addresses into a web browser to load the Synology Web Assistant. The status of your ioSafe should read Not Installed. Synology Web Assistant is optimized for the Chrome and Firefox browsers.
PURCHASED WITH HARD DRIVES
http://iosafe:5000 OR
PURCHASED WITHOUT DRIVES
http://diskstation:5000 OR
CONNECT VIA SYNOLOGY.COM
http://find.synology.com

18 ioSafe 1019+ User Manual
c. Click the Connect button to begin the setup process. ioSafe
Connect
d. Follow the on-screen instructions to install Synology DSM. Your ioSafe will automatically restart in the middle of setup.

ioSafe 1019+ User Manual 19
4 Connect and Log in to Synology DiskStation Manager
a. Turn on the ioSafe 1019+ if it is not already powered on. It will beep once when it is ready to set up.
b. Type in one of the following addresses into a web browser to load the Synology Web Assistant. The status of your ioSafe should read Ready.
PURCHASED WITH HARD DRIVES
http://iosafe:5000
OR PURCHASED WITHOUT DRIVES
http://<server_name>:5000
OR CONNECT VIA SYNOLOGY.COM
http://find.synology.com

If you do not have an Internet connection and you purchased the ioSafe 1019+ without drives pre-installed, you will need to connect using the second method. Use the server name you gave your ioSafe 1019+ while installing Synology DiskStation Manager (see Section 3).

c. Click the Connect button.

ioSafe

Connect

20 ioSafe 1019+ User Manual
d. The browser will display a login screen. If you purchased the ioSafe 1019+ with pre-installed drives, the default username is admin and the password is left blank. For those who purchased the ioSafe 1019+ without drives, the username and password are the ones you created while installing Synology DSM (see Section 3).
ioSafe <username> <password>
Stay signed in
Sign In
You can change the username and password with the "User" Control Panel applet in the Synology DiskStation Manager user interface.

ioSafe 1019+ User Manual 21
5 Using Synology DiskStation Manager
You can find out more about how to use Synology DiskStation Manager (DSM) by refering to DSM Help on the Synology DSM desktop, or by referring to the DSM User's Guide, available for download from the Synology.com Download Center.

22 ioSafe 1019+ User Manual
6 Replace System Fans
The ioSafe 1019+ will play beep sounds if either of the system fans is not working. Follow the steps below to replace the malfunctioning fans with a good set. a. Shut down your ioSafe. Disconnect all cables connected to your ioSafe to prevent possible damage. b. Remove the seven (7) perimeter screws around the rear fan assembly plate. c. Pull the assembly from the back panel of your ioSafe to expose the fan connections. d. Disconnect the fan cables from the connector wires attached to the rest of the ioSafe and then
remove the assembly.
e. Install the new fan assembly or replace the existing fans. Connect the fan cables of the new fans to the fan connector wires attached to the main ioSafe unit.
f. Replace and tighten the seven (7) screws you removed in Step B.

ioSafe 1019+ User Manual 23
7 Product Support
Congratulations! You are now ready to manage and enjoy all the features of your ioSafe 1019+ device. For more information regarding specific features, please check out DSM Help or refer to our online resources available at iosafe.com or synology.com.
7.1 Activate Data Recovery Service Protection Register your product to activate your Data Recovery Service protection plan by visiting iosafe.com/activate.
7.2 ioSafe No-Hassle Warranty If the ioSafe 1019+ breaks during the warranty period, we will repair or replace it.
The standard term for the warranty is two (2) years from the date of purchase. A five (5) year extended term warranty service is available for purchase upon activation of the Data Recovery Service. See the website or contact customerservice@iosafe.com for help. ioSafe reserves the right to have its representative inspect any product or part to honor any claim, and to receive a purchase receipt or other proof of original purchase before warranty service is performed.
This warranty is limited to the terms stated herein. All expressed and implied warranties including the warranties of merchantability and fitness for a particular purpose are excluded, except as stated above. ioSafe disclaims all liabilities for incidental or consequential damages resulting from the use of this product, or arising out of any breach of this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may have other rights as well, which will vary from state to state.
7.3 Data Recovery Procedure If the ioSafe faces possible data loss for any reason, you should immediately call the ioSafe Disaster Response Team at 1-888-984-6723 extension 430 (US & Canada) or 1-530-820-3090 extension. 430 (International). You can also send an email to disastersupport@iosafe.com. ioSafe can determine the best actions to take to protect your valuable information. In some cases a self-recovery can be performed and provide you with immediate access to your information. In other cases, ioSafe may request that the product be returned to the factory for data recovery. In any case, contacting us is the first step.
The general steps for disaster recovery are:
a. Email disastersupport@iosafe.com with your serial number, product type and date of purchase. If you cannot email, call the ioSafe Disaster Support Team at 1-888-984-6723 (US & Canada) or 1-530-820-3090 (International) extension 430.
b. Report the disaster event and obtain return shipping address/instructions.

24 ioSafe 1019+ User Manual
c. Follow ioSafe team instructions on proper packaging. d. ioSafe will recover all data which is recoverable according to the terms of the Data Recovery
Service Terms and Conditions. e. ioSafe will then place any recovered data on a replacement ioSafe device. f. ioSafe will ship the replacement ioSafe device back to the original user. g. Once the primary server/computer is repaired or replaced, the original user should restore the
primary drive data with the ioSafe backup data.
7.4 Contact Us
Customer Support USA Toll Free Phone: 888.98.IOSAFE (984.6723) x400 International Phone: 530.820.3090 x400 Email: customersupport@iosafe.com
Technical Support USA Toll Free Phone: 888.98.IOSAFE (984.6723) x450 International Phone: 530.820.3090 x450 Email: techsupport@iosafe.com
Disaster Support US Toll Free Phone: 888.98.IOSAFE (984.6723) x430 International Phone: 530. 820.3090 x430 Email: disastersupport@iosafe.com

ioSafe 1019+ User Manual 25

8 Technical Specifications

Product Model

ioSafe 1019+

Fire Protection

Up to 1550° F, 30 minutes per ASTM E-119

Water Protection

Fully submersed, fresh or salt water, 10 foot depth, 72 hours

Interface Types & Speeds

Ethernet (RJ45): up to 1 Gbps (up to 2 Gbps with link aggregation enabled) eSATA: up to 6 Gbps (for ioSafe expansion unit only) USB 3.2 Gen 1: up to 5 Gbps

Supported Drive Types

3.5-inch SATA hard drives x5 2.5-inch SATA hard drives x5 2.5-inch SATA SSDs x5 Complete list of qualified drive models available on iosafe.com

CPU

64-bit Intel Celeron J3455 2.3Ghz Quad Core Processor

Encryption

AES 256-bit

Memory

8GB DDR3L

NVMe Cache

M.2 2280 NVMe SSD x2

LAN Port

Two (2) 1 Gbps RJ-45 ports

Front Data Connectors

One (1) USB Type-A connector

Rear Data Connectors

One (1) eSATA connector (for ioSafe expansion unit only) One (1) USB Type-A connector

Max Internal Capacity

70TB (14TB x 5) (Capacity may vary by RAID type)

Max Raw Capacity with Expansion Unit

140TB (14TB x 10) (Capacity may vary by RAID type)

Torque

2.5-inch drives, M3 screws: 4 inch-pounds max. 3.5-inch drives, #6-32 screws: 6 inch-pounds max.

Supported Clients

Windows 10 and 7 Windows Server 2016, 2012 and 2008 product families macOS 10.13 "High Sierra" or newer Linux distributions that support the connection type used

File Systems

Internal: Btrfs, ext4 External: Btrfs, ext3, ext4, FAT, NTFS, HFS+, exFAT*

Supported RAID Types

JBOD, RAID 0, 1, 5, 6, 10 Synology Hybrid RAID (up to 2-disk fault tolerance)

Compliance

EMI Standard: FCC Part 15 Class A EMC Standard: EN55024, EN55032 CE, RoHS, RCM

*Support for exFAT can be enabled after you have purchased and downloaded exFAT Access in the Synology DSM Package Center.

26 ioSafe 1019+ User Manual

HDD Hibernation

Yes

Scheduled Power On/Off Yes

Wake on LAN

Yes

Product Weight

Unpopulated: 57 pounds (25.85 kg) Populated: 62-65 pounds (28.53-29.48 kg) (depending on drive model)

Product Dimensions

19in W x 16in L x 21in H (483mm W x 153mm L x 534mm H)

Environmental Requirements

Line voltage: 100V to 240V AC Frequency: 50/60Hz Operating Temperature: 32 to 104°F (0 to 40°C) Storage Temperature: -5 to 140°F (-20 to 60°C) Relative Humidity: 5% to 95% RH

US Patents

7291784, 7843689, 7855880, 7880097, 8605414, 9854700

International Patents

AU2005309679B2, CA2587890C, CN103155140B, EP1815727B1, JP2011509485A, WO2006058044A2, WO2009088476A1, WO2011146117A2, WO2012036731A1, WO2016195755A1

ioSafe 1019+ User Manual 27

©2019 CRU Data Security Group, ALL RIGHTS RESERVED.
This User Manual contains proprietary content of CRU Data Security Group, LLC ("CDSG") which is protected by copyright, trademark, and other intellectual property rights.
Use of this User Manual is governed by a license granted exclusively by CDSG (the "License"). Thus, except as otherwise expressly permitted by that License, no part of this User Manual may be reproduced (by photocopying or otherwise), transmitted, stored (in a database, retrieval system, or otherwise), or otherwise used through any means without the prior express written permission of CDSG.
Use of the full ioSafe 1019+ product is subject to all of the terms and conditions of this User Manual and the above referenced License.

CRU®, ioSafe®, Protecting Your DataTM, and No-HassleTM (collectively, the "Trademarks") are trademarks owned by CDSG and are protected under trademark law. Kensington® is a registered trademark of Kensington Computer Products Group. Synology® is a registered trademark of Synology, Inc. This User Manual does not grant any user of this document any right to use any of the Trademarks.
Product Warranty CDSG warrants this product to be free of significant defects in material and workmanship for a period of two (2) years from the original date of purchase. A five (5) year extended warranty is available for purchase upon activation of the Data Recovery Service. CDSG's warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability The warranties set forth in this agreement replace all other warranties. CDSG expressly disclaims all other warranties, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose and non-infringement of third-party rights with respect to the documentation and hardware. No CDSG dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. In no event will CDSG or its suppliers be liable for any costs of procurement of substitute products or services, lost profits, loss of information or data, computer malfunction, or any other special, indirect, consequential, or incidental damages arising in any way out of the sale of, use of, or inability to use any CDSG product or service, even if CDSG has been advised of the possibility of such damages. In no case shall CDSG's liability exceed the actual money paid for the products at issue. CDSG reserves the right to make modifications and additions to this product without notice or taking on additional liability.
FCC Compliance Statement: "This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation."
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at this own expense.

In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:

Ensure that the case of your attached drive is grounded.

Use a data cable with RFI reducing ferrites on each end.

Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.

Reorient or relocate the receiving antenna.

Part Number: A8-7520-0000 Rev. 1.4

References

Adobe PDF Library 16.0.3 Adobe InDesign 17.0 (Windows)