DoC - LANCOM Systems GmbH
User Guide for LANCOM models including: GS-3152P, Fully Managed Access Switches, GS-3152P Fully Managed Access Switches
LANCOM GS-3152P: LANCOM Systems GmbH
- LANCOM Systems GmbH
File Info : application/pdf, 1 Pages, 573.61KB
DocumentDocument111674/0622 LED description & technical details relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and/or omissions. LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This document contains statements Hardware Quick Reference LANCOM GS-3152P Configuration interface (Console) Connect the configuration interface via the included serial configuration cable to the serial interface of the device you want to use for configuring / monitoring the switch. TP Ethernet interfaces 10M / 100M / 1G PoE+ Use Ethernet cables to connect the interfaces 1 to 36 to your PC or a LAN switch. TP Ethernet interfaces 10M / 100M 1G Use Ethernet cables to connect the interfaces 37 to 48 to your PC or a LAN switch. SFP interfaces 1G Insert suitable LANCOM SFP modules into the SFP interfaces 49 to 52. Choose cables which are com- patible with the SFP modules and connect them as described in the module's documentation. Power connector (device back side) Supply power to the device via the power connec- tor. Please use the IEC power cable supplied or a country-specific LANCOM Power Cord. Warning! High touch current. Connect to earth before connecting the power supply. System / Link/Act/Speed / PoE-LED System: off System: green System: red Link/Act/Speed: green PoE: green Device powered off Device operational Hardware error Port LEDs show link / activity / port speed status Port LEDs show PoE status Mode/Reset button Short press Pressed until all port LEDs are off Pressed until all port LEDs glow permanently Switching the port LED display Device restart Configuration reset and device restart TP Ethernet ports Off Green Green, blinking Orange Orange, blinking Port inactive or disabled Link 1000 Mbps Data transfer, link 1000 Mbps Link 100 Mbps Data transfer, link 100 Mbps 1G SFP ports Off Green Green, blinking Port inactive or disabled Link 1 Gbps Data transfer, link 1 Gbps Hardware Power supply Internal power supply unit (110230 V, 5060 Hz, max. 1 A) Power consumption Max. 470 W Environment Temperature range 040° C; short term temperature conditions 0-50°C; humidity 1090%; non-condensing Housing Robust metal housing, 1 HU with removable mounting brackets for 19" installation, network connectors on the front, 442 x 44 x 375 mm (W x H x D) Number of fans 1 Interfaces ETH SFP 48 TP Ethernet ports 10 / 100 / 1000 Mbps, including 36 PoE+ ports 4 SFP ports 1 Gbps 52 concurrent ports in total Package Content Mounting brackets Cable Two 19" brackets for rack mounting; If an additional rear support surface is required for more stable mounting of the switch, please use the LANCOM Switch Rack Mount L250, item no.: 61432, which is available as an accessory. IEC power cord 230 V, serial configuration cable 1.5 m Mounting & connecting Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide! i Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times. Cloud-ready If an additional rear support surface is required for more stable mounting of the switch, please use the LANCOM Switch Rack Mount L250. Please observe the following when setting up the device The mains plug of the device must be freely accessible. For devices to be operated on the desktop, please attach the adhesive rubber footpads Do not rest any objects on top of the device and do not stack multiple devices Keep all ventilation slots of the device clear of obstruction Mount the device into a 19" unit in a server cabinet using the provided screws and mounting brackets. Please note that support for third-party accessories (SFP and DAC) is not provided. Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc/