ROYQUEEN G30 User Manual

1. Buttons & Slot and Port

Buttons and Controls:

• + Button: Short press for [Next track], Long press for [Volume increase], Double press for [Switch to next folder] (under TF card mode).
• Mute/Play/Pause Button: Short press for [Play/Pause/Mute], Long press for [Clear Bluetooth pairing] / [Toggle song loop mode] (under TF card mode).
• - Button: Short press for [Previous track], Long press for [Volume decrease], Double press for [Switch to previous folder] (under TF card mode).

Ports:

• Type-C Charging Port
• Micro SD Card Slot

Power/Mode Button:

• Short press: [Power on/off].
• Long press: [Switch working mode] to Bluetooth or TF card mode.

LED Indicator Status:

• Blue light flash slowly: Waiting for Bluetooth pairing.
• Blue light flash fast: Waiting for TWS pairing.
• Blue light on: Working status / Bluetooth paired successful.
• Red light on: Charging.
• Red light off: Fully charged.

Press and hold the [+] button and the [Mute/Play/Pause] button at the same time to turn on/off TWS function.

2. Bluetooth Mode

Power on the speaker and short press the [Mute/Play/Pause] button to choose Bluetooth mode. The light indicator will twinkle. Search for "ROYQUEEN G30" on your device and connect.

The G30 remembers the last paired device (unless pairing is cleared) and automatically reconnects. Long press the [Mute/Play/Pause] button to disconnect the current Bluetooth connection, allowing other Bluetooth devices to find and pair with the speaker.

3. TF Card Mode

Insert a Micro SD card into the speaker and select TF Card Mode. The speaker will play music directly from the Micro SD card.

Please note that the Micro SD card supports memory capacity up to 32GB and audio formats MP3, WAV.

4. TWS (True Wireless Stereo) Function

1. Power on two G30 Speakers and switch to Bluetooth mode. Press and hold the [+] button and the [Mute/Play/Pause] button on one speaker simultaneously. The speaker will search for and connect to the other G30 speaker automatically.
2. When the two stereo TWS speakers connect successfully, the blue light flashing indicates the left channel, and the light off one indicates the right channel.
3. Repeat the Bluetooth connection operation: connect your Bluetooth device to the speaker (connect the left channel machine automatically). After successful connection, play the device's music to achieve a stereophonic effect.

Note:

• This function requires two G30 speakers, both waiting for Bluetooth pairing status.
• In TWS mode, turning off one speaker will shut down the other synchronously.
• After the first successful connection, the two speakers will automatically connect again when they are waiting for Bluetooth pairing status (except when pairing memory is cleared).

5. Intelligent Power Saving Function

In Bluetooth mode, if the speaker is waiting for pairing for more than 10 minutes, it will be powered off automatically.

Please long press the power button to power on the speaker again.

6. Charging

When the speaker emits a low power alarm, it indicates low battery. Please charge the speaker immediately.

Note:

• Please use a good quality adapter to charge the speaker.
• We suggest using an adapter with specifications of 5V/1A.
• The speaker can be charged by different charging currents. If using a computer to charge the speaker, the charging time will be very long due to the low current (only 500 mA).

7. Technical Data

• Voice Prompt Output: 5W
• Built-in battery: 3.7V 1800 mAh
• Playing time: 8~16h
• Charging time: 3h (5V 1A)
• Cabinet Material: ABS+Fabric
• Waterproof Rating: IP66
• Dimension: 3.9*3*2 inches / 9.9*7.5*5 cm
• Net Weight: 6.7oz / 190g

8. FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

9. Product Service Regulations

Product Customer Service

ROYQUEEN Bluetooth speakers provide a one-year warranty. If you have any problems during use, please feel free to contact us via Amazon or 24h after-sales support. We will reply as soon as possible to help you solve the problem.

Email: rq_support@royqueen.hk

Certifications: FC, ROHS, CE

Made in China